Novae GRIDIRON User manual
GRIDIRON
GRIDIRONGRIDIRON
GRIDIRONTM
Custom Tool StorageTM
Backpack Blower Holder
Instruction Manual
Thank you for purchasing this Gridiron product
Installation
1 The fasteners are assembled at the factory but can loosen
during shipping. Assemble any loose bolts, washers, and T-
nuts only as shown (NOTE- INCORRECT ASSEMBLY WILL
RESULT IN DAMAGE.)
2 The GRIDIRON Blower Rack can be mounted to Gridiron
Posts or to a 2x4 or other suitable framework, See page 2.
(Obtain required hardware locally)
3 Mount the blower shelf using 5/16-18 x 3/4 screws, lock and
flat washers, and a double T-nut. Tighten in place.
4 Place the blower bracket about 8 to 10 inches above the the
shelf using 5/16-18 x 3/4 screws, flat washers, and a double
T-nut. Adjust up or down to allow easy mounting and dis-
mounting of your blower. Tighten in place.
5 Place the blower hooks on the bracket and slide as shown,
facing out for wide blower frames or facing in for narrow
blower frames. Adjust as necessary for a snug fit.
6 Place the blower loop in a suitable location to allow secure
storage and easy mounting and dismounting of the blower. It
can be placed above on the same Gridiron post, to the side on
another Gridiron post, on the trailer rail or wall, or any other
suitable location. (Obtain hardware locally for wall or trailer
rail mounting)
Assemble T-nuts with pilot
to inside of post.
WARNING!
DAMAGE MAY RESULT
T-nut
Pilot
Wide frame
blowers
Narrow frame
blowers
Step 5. Blower
hook adjustment
The GRIDIRON Lifetime Guarantee
We want you to be a satisfied GRIDIRON customer forever so we stand
behind our GRIDIRON products with a lifetime guarantee.
Performance Guarantee
If at any time you are not completely satisfied with the performance of your
GRIDIRON product we will correct or replace it. Simply return it to an au-
thorized dealer.
Replacement agreement for misuse or abuse
Should you damage your GRIDIRON through misuse or abuse, we will re-
place the item for ½ the current suggested list price. Send the product,
shipping prepaid, along with an explanation to Novae Customer Service.
15 Day unconditional money back guarantee
If at any time within fifteen (15) days after your purchase you are not satis-
fied with your GRIDIRON product, return it to the an authorized dealer for
full refund.
Some exceptions
The springs, shock cord elements, and finish provided with your GRID-
IRON products are subject to normal wear and tear and are not covered
by this guarantee.
GRIDIRON
GRIDIRONGRIDIRON
GRIDIRONTM
Custom Tool StorageTM
Step 2. Mount to
GRIDIRON post (left)
or to a 2 x 4 or any
vertical frame.
Part List
Qty
Description Part No.
1 Blower Bracket 102141
1 Blower Slide 102259
1 Lock Lever 102258
1 Spring, Flat 102257
1 Blower loop 102144
1 Shelf 102138
2 Blower hook 102140
2 Double T-nut 102146
1 Single T-nut 102147
2 5/16-18 x 3/4” Carr. bolt
2 5/16-18 Nut
1 5/16-18 x 1/2” Bolt
5 5/16-18 x 3/4” Bolt
5 5/16” Flat Washer
7 5/16” Lock washer
Package Contents
Slide
Shelf
Blower loop
Spring, Flat
Blower bracket
Lock Lever
Blower hook
Operation/Maintenance
1 Squeeze the lock lever to move the slide open. Place
the blower on the shelf and slide one side of the blower
frame behind the right blower hook.
2 Move the slide until the blower frame is clamped by the
sliding hook.
3 To lock, place a padlock in a hole in the blower bracket
so the slide cannot be moved open. Place the lock in
the storage location when not in use. (Lock not in-
cluded)
Lubricate slide components as needed to insure smooth
operation and corrosion resistance.
Novae Corp.
2302 Pennsylvania St.
Fort Wayne, IN. 46803
800-372-1755
www.novaecorp.com
©2002 Novae Corp. All rights reserved
