Nubeo Curiosity NB-6043 User manual

INSTRUCTION MANUAL
BEDIENUNGSANLEITUNG
VOL.1.43 EN/DE
NUBEOWATCHES.COM

2
EN
Curiosity is a car-sized Mars rover designed to explore Mars as part of NASA's Mars
Science Laboratory (MSL) mission.
The MSL mission founded in 1993 was formed to help determine whether Mars could
ever have supported life, as well as determining the role of water, and to study the
climate and geology of Mars.
The work of MSL is to perhaps best described as helping to set the stage for the
human exploration of Mars.
The rover, which is about the size of a MINI Cooper, landed on Mars on August 6,
2012 equipped with 17 cameras and a robotic arm containing a suite of specialized
laboratory-like tools and instruments.
Curiosity's scientific tools found chemical and mineral evidence of past habitable
environments on Mars. Today, it continues to explore Mars beaming down captivat-
ing images and further evidence of the potential for a human mission to take place in
the near future.

EN
3
Curiosity is a car-sized Mars rover designed to explore Mars as part of NASA's Mars
Science Laboratory (MSL) mission.
The MSL mission founded in 1993 was formed to help determine whether Mars could
ever have supported life, as well as determining the role of water, and to study the
climate and geology of Mars.
The work of MSL is to perhaps best described as helping to set the stage for the
human exploration of Mars.
The rover, which is about the size of a MINI Cooper, landed on Mars on August 6,
2012 equipped with 17 cameras and a robotic arm containing a suite of specialized
laboratory-like tools and instruments.
Curiosity's scientific tools found chemical and mineral evidence of past habitable
environments on Mars. Today, it continues to explore Mars beaming down captivat-
ing images and further evidence of the potential for a human mission to take place in
the near future.

4
EN
This watch is equipped with a screw down crown . Do not pull the crown
unless it is unscrewed rst.
PLEASE READ THE FOLLOWING BEFORE UNSCREWING THE CROWN
TO UNSCREW: Turn the crown anti-clockwise until it
turns freely without tension. Gently pull the crown out
to the other desired positions for watch setting (see
specic operating instructions on the following pages).
SCREW-DOWN CROWN
TO SCREW: Push the crown all the way in (towards the
watch) then begin to turn clockwise until it is securely
screwed down.
Note: Failure to securely screw down the crown after
setting the watch may affect its water resistance.
0
1

EN
5
CHRONOGRAPH / SWISS MADE MOVEMENT
As your watch has a screw down crown feature, release the watch from the
screw-down position before setting.
Chronograph
30 Minute
Hand
Crown
Positions
Screwed
Down Position
Open
Cover
Date
Hour Hand
Uni-directional
Turning Bezel
Chronograph
Second Hand Small
Second Hand
0 1 2 3
MinuteHand
Push Button A
Push Button B

6
EN
* Before setting the time, check that the chronograph measurement is
stopped.
1. Pull out the crown to the position [2]-(1st click).
2. Turn the crown clockwise until the preview day’s date appears.
3. Pull out the crown to the position [3]-(2nd click) when the second hand is
at the 12 o’clock position. It will stop on the spot. Set the hands to the
desired time of the day (make sure AM/PM is set correctly) by turning
the crown.
* When the crown is at the position [3]-(2nd click), do not press any pusher.
Otherwise the chronograph hands will move.
4. Push the crown back in the position [0] in accordance with a time signal.
HOW TO SET THE DATE AND TIME

EN
7
* Do not set the date between 9:00 P.M. and 00:30 A.M., otherwise the
day may not change properly. If it is necessary to set the date during the
time period, rst change the time to any time outside it, set the date and
then reset the correct time.
* Always be certain that your crown is SECURELY SCREWED; this will
prevent moisture from entering in the watch.

8
ENSTOPWATCH FUNCTION
Standard Measurement
• The stopwatch can measure up to 2 hours.
START STOP RESET

EN
9
Split Time Measurement
Measurement and release of split time can be
repeated as many times as necessary by pressing the
button B.
STOP
START SPLIT SPLIT RELEASE
RESET

10
EN
ADJUSTING THE STOPWATCH HAND POSITION
* Before setting the time, check if all the chronograph hands (second,
minute) - are at the “0” (12 o’clock) position.
* If the stopwatch is in use, press the buttons in the following order to reset
it, and then, check if the hands return to “0” position.
If the chronograph is counting : A->B
If the stopwatch is stopped : B
If the split time is displayed : B->A->B
A
B

EN
11
AFTER BATTERY EXCHANGE OR MISHANDLING
ONLY
To reset chronograph,
minute and second chronograph.
1. Pull the crown in position [2]-
(1st click).
2. Push the pusher A two times with
a time interval of 2s. The hand of
counter 9h makes a turn.
2
2
A

12
EN
3. Push B continually for quick setting
and push step by step to ajust the
minute.
4. Push the pusher A. The second hand
makes a turn.
2
2
A
B

EN
13
5. Push B continually for quick setting
and push step by step to ajust the
second.
6. Push the crown in position [0] to
exit.
0
2
B

14
EN
* Turn slightly the crown. To facilitate the synchronization.
STOPWATCH
HANDS
ZERO
POSITIONS

EN
15
All Nubeo timepieces are designed with a minimum water resistance rating
of 5 ATM (50m). The water-resistance of a timepiece protects the movement
from dust, moisture, and risk of damage to the movement should it be
immersed in water.
Please see chart for guidelines for the recommended exposure of various
water ratings. It is important not to attempt to adjust the position of the
crown while the timepiece is in contact with water. Water can enter the case
causing damage to the movement.
For timepiece with screw-down crowns, it is important to ensure the crown
is in the proper position and completely locked before contact with water.
For timepieces with chronograph functions, do not engage the chronograph
under water, as water may leak in the case and cause damage to the
movement.
WATER RESISTANT

16
EN
USE PRECAUTIONS - RESISTANCE TO WATER
All Nubeo timepiece are designed to withstand use as indicated on the following
chart. Always make sure the crown is screwed-down completely before use.

EN
17
Each Nubeo timepiece is designed and manufactured to exceed the highest
of standards. In order to ensure optimal performance and longevity from
your timepiece, please review the simple guidelines for care and precautions
of your new Nubeo timepiece.
CARE AND PRECAUTIONS
Your timepiece should be cleaned with a soft cloth and water only. Your
timepiece should be rinsed clean and dried with a soft cloth after any
saltwater use. In order to maintain the ‘new look’ of metal bracelets, we
recommend periodic cleanings of the bracelet. Dip a soft brush in warm
soapy water and gently rub bracelet clean. We advise having your timepiece
serviced every 18-24 months to ensure long use and trouble-free operation.
CARE

18
EN
TWO (2) YEAR INTERNATIONAL WARRANTY
Your Nubeo watch is warranted for a period two (2) years from the original
date of purchase under the terms and conditions of the warranty. The Nubeo
warranty covers materials and manufacturing defects. A copy of the receipt
or dealer stamp in the warranty booklet is required for proof of purchase.
During the warranty period the watch movement, hands and dial are the
only components covered under this warranty. A covered component will be
repaired or the watch will be replaced free of repair charges, if it proves to
be defective in material or workmanship under normal use.

EN
19
NOT COVERED BY WARRANTY
- Damage to lens or strap.
- Normal wear and tear.
- Malfunction and deterioration from accident, negligence or tampering.
- Water damage resulting from improper usage.
- The content of the warranty has been altered.
- There is no presentation of the warranty.
This warranty is void if the watch has been damaged by accident, negligence
of persons other than authorized Nubeo sales or services agents, unauthorized
service, or other factors not due to defects in materials or workmanship.

20
ENREQUESTING WARRANTY AND OTHER WATCH
REPAIR
Should you require work under warranty, please send in your watch, a copy
of your sales receipt and/or the warranty booklet with dealer stamp and a
description of the problem to the authorized international watch service
center closest to you.
For service work that is not covered under this warranty, the service center
may perform the services you request for a charge dependent on watch style
and type of work requested. These charges are subject to change.
For repairs of your Nubeo watch, we recommend that you contact an
authorized Nubeo dealer or the authorized international watch service center
closest to you.
For details, please refer to our website at:
WWW.NUBEOWATCHES.COM