NUTRICHEF PKMRC46 User manual

Product introductions
1. Detachable steaming valve and inner cover for easy clean
2. Aluminum alloy inner pot with non-stick coating
3. Safety protection for high temperature
4. LED digital display
Knowing your Product
Control Panel
START button
While in the standby mode, press MENU button to select a cooking mode and then press START
button to start cooking. A buzzer will sound.
While using the TIMER program, press the START button to confirm the preset settings.
MENU button
While the cooker is in standby mode, press MENU button to select desired cooking modes will cycle as
follows:
GRAIN PILAF FRY MILK PORRIDGE BUCKWHEAT SOUP STEAM WARM 
STEW YOGURT BAKE
TIMER button
Use this function to delay a cooking program.
You can use this function only after choose the cooking mode, Press MENU button to choose the
function you want to delay, and then press “TIMER” button ,the indicate light of “TIMER “button will
blink , press MENU(minute) and TIME(hour) buttons to set delay time within 24 hours.
WARM/CANCEL button
While the cooker is in standby mode, press WARM/CANCEL button to start the keep warm function.
When it is cooking, press WARM/CANCEL button to cancel all cooking process and return to the
standby mode.

TIME button
After press MENU button to select the cooking mode, press the TIME button could adjust the desired
cooking time under setting.
Prepare to cook
Before First Use
Read all the instructions and important safeguards.
Remove all packaging materials; make sure items are received in good condition.
Place multi-cooker on a flat, heat-resistant and non-flammable surface.
Remove any stickers from the surface of the cooker and wipe the surface clean with a damp dishcloth.
Wash all the accessories with warm soapy water using a sponge or dishcloth.
Rinse well to remove soapy residue, then dry thoroughly.
Do not use abrasive cleaners or scouring pads.
Do not immerse the appliance, cord and plug in water at any time.
Power Up
Always check to see if the electric cord or plug is damaged before use.
Attach plug to appliance first, then plug cord into the wall outlet.
You will hear a beep and the cooker will enter into the standby mode.
The LED display will show ”- - - -“ and means the cooker in standby mode.
The cooker is now ready for cooking.
General Operation Guide
1.Prepare the food you want to cook according to the recipes.
2.Put food into the cooking pot.
3.Press MENU to select a cooking mode according to the recipes.
4.Press the START to start the cooking process immediately.
5.After finished cooking, press the WARM/CANCEL button to turn off the unit.
Note:
To cancel an activated program, simply press WARM/CANCEL button. The cooker will go to standby
mode. You can start to program again.
Cooking mode
GRAIN mode
1. Prepare food for GRAIN according to recipe.
2. Place the removable cooking pot in its place.
3. Press MENU button until the indicator light for “GRAIN” is on, the LED display will show the default
cook time.
4. Adjust the cooking time if desired.
5. Press START button, the cooking time will start counting down.
6 When the cooking time ends, the cooker will beep and go automatically to the “keep warm” mode.
The LED display will show warm time running from “ 0000 “
7 Until you press WARM/CANCEL button to cancel the program, the food will keep warm for up to
24hours.
PILAF mode
1. Prepare food for PILAF according to recipe.
2. Place the removable cooking pot in its place.
3. Press MENU button until the indicator light for “PILAF” is on, the LED display will show the default
cook time.
4. Adjust the cooking time if desired.
5. Press START button, the cooking time will start counting down.
6. When the cooking time ends, the cooker will beep and go automatically to the “keep warm” mode.
The LED display will show warm time running from “ 0000 “
7. Until you press WARM/CANCEL button to cancel the program, the food will keep warm for up to 2
4hours.
FRY mode
MAKE SURE THE LID IS OPEN FOR FRY

1. Prepare food for FRY according to recipe.
2. Place the removable cooking pot in its place.
3. Add the appropriate amount of oil as indicated in the recipe.do not exceed the 1/2 capacity of the
inner pot
4. Press MENU button until the indicator light for “FRY” is on, the LED display will show the default
cook time.
5. Adjust the cooking time if desired by pressing the “TIMER ”button to increase time
6. Press START button, the cooking time will start counting
7. When the cooking time ends, the cooker will beep and go automatically to standby mode ,
MILK PORRIDGE mode
1. Prepare food for MILK PORRIDGE according to recipe.
2. Place the removable cooking pot in its place.
3. Press MENU button until the indicator light for “MILK PORRIDGE” is on, the LED display will show
the default cook time.
4. Adjust the cooking time if desired.
5. Press START button, the cooking time will start counting down.
6. When the cooking time ends, the cooker will beep and go automatically to the “keep warm” mode.
The LED display will show warm time running from “ 0000 “
7. Until you press WARM/CANCEL button to cancel the program, the food will keep warm for up to 2
4hours.
BUCKWHEAT mode
1. Prepare food for BUCKWHEAT according to recipe.
2. Place the removable cooking pot in its place.
3. Press MENU button until the indicator light for “BUCKWHEAT” is on, the LED display will show the
default cook time.
4. Adjust the cooking time if desired.
5. Press START button, the cooking time will start counting down.
6. When the cooking time ends, the cooker will beep and go automatically to the “keep warm” mode.
The LED display will show warm time running from “ 0000 “
7. Until you press WARM/CANCEL button to cancel the program, the food will keep warm for up to 2
4hours.
SOUP mode
1. Prepare food for SOUP according to recipe.
2. Place the removable cooking pot in its place.
3. Press MENU button until the indicator light for “SOUP” is on, the LED display will show the default
cook time.
4. Adjust the cooking time if desired.
5. Press START button, the cooking time will start counting down.
6. When the cooking time ends, the cooker will beep and go automatically to the “keep warm” mode.
The LED display will show warm time running from “ 0000 “
7. Until you press WARM/CANCEL button to cancel the program, the food will keep warm for up to 2
4hours.
STEAM mode
1. Prepare food for SOUP according to recipe.
2. Put steam tray into the removable cooking pot. Fill cold water into pot just below bottom of the
steamer tray, about 2 cups. Put the food on the steam tray or on a dish.
3. Press MENU button until the indicator light for “STEAM” is on, the LED display will show the default
cook time.
4. Adjust the cooking time if desired.
5. Press START button, the cooking time will start counting down.
6. When the cooking time ends, the cooker will beep and go automatically to the “keep warm” mode.
The LED display will show warm time running from “ 0000 “
7. Until you press WARM/CANCEL button to cancel the program, the food will keep warm for up to 2
4hours.
STEW/BRAISE mode
1. Prepare food for STEW/BRAISE according to recipe.

2. Place the removable cooking pot in its place.
3. Press MENU button until the indicator light for “STEW/BRAISE” is on, the LED display will show the
default cook time.
4. Adjust the cooking time if desired.
5. Press START button, the cooking time will start counting down.
6. When the cooking time ends, the cooker will beep and go automatically to the “keep warm” mode.
The LED display will show warm time running from “ 0000 “
7. Until you press WARM/CANCEL button to cancel the program, the food will keep warm for up to 2
4hours.
YOGURT/DOUGH mode
1. Prepare food for YOGURT/DOUGH according to recipe.
2. Place the removable cooking pot in its place.
3. Press MENU button until the indicator light for “YOGURT/DOUGH” is on, the LED display will show
the default cook time.
4. Adjust the cooking time if desired.
5. Press START button, the cooking time will start counting down.
6. When the cooking time ends, the cooker will beep and go automatically to standby mode.
7. Until you press WARM/CANCEL button to cancel the program, the food will keep warm for up to 2
4hours.
BAKE/BREAD mode
1. Prepare food for BAKE/BREAD according to recipe.
2. Place the removable cooking pot in its place.
3. Press MENU button until the indicator light for “BAKE/BREAD” is on, the LED display will show the
default cook time.
4. Adjust the cooking time if desired.
5. Press START button, the cooking time will start counting down.
6. When the cooking time ends, the cooker will beep and go automatically to the “keep warm” mode.
The LED display will show warm time running from “0000”
7. Until you press WARM/CANCEL button to cancel the program, the food will keep warm for up to 2
4hours.
Note:
Press WARM/CANCEL button to turn off the keep warm function.
For the best results, fluff rice within 30 minutes after cooking is finished. The rice is ready to serve.
It is suggested that the white rice and water relation volume is 1:1. The maximum rice amount is 8
cups.
Using the TIMER function
This function allows you to delay the cooking process on foods like baked potatoes, up to 24 hours in 5
minute increments. However, we do not recommend this with perishable foods like meats, if left at room
temperature for more than 2 hours they could spoil.
You can use the delay time setting with all modes except FRY and YOGURT/DOUGH mode.
DO NOT LEAVE PERISHABLE FOODS SUCH AS MEAT, POULTRY, FISH, CHEESE AND DAIRY
PRODUCTS AT ROOM TEMPERATURE FOR MORE THAN 2 HOURS (OR MORE THAN 1 HOUR
WHEN THE ROOM TEMPERATURE IS ABOVE 90°F).
WHEN COOKING WITH THESE FOODS, DO NOT SET THE TIMER FUNCTION FOR MORE
THAN 1-2 HOURS.

Cleaning and Maintenance
Do not wash any parts of the multi-cooker in the dishwasher except for the removable cooking pot and
accessories. Always wash the multi-cooker thoroughly after every use, or if it has not been used for an
extended period.
Precaution: ALWAYS unplug the multi-cooker and allow the unit to cool before cleaning.
Main unit and outer lid
Wipe with a damp cloth. If you continue using the rice cooker with a soiled lid, the soil will not come
off. The outer lid may be discolored or stained with the soil, but is not unsanitary.
Do not wash with dishwashing detergent. Do not immerse the main unit in water.
Steam valve
ALWAYS check that the steam valve is in good working order before each use. The Stem Valve removes
for easy cleaning, simply pull up on the valve’s lip and it pops out.
Removable cooking pot:
Wash with dishwashing detergent and a sponge. Wipe water off the pot.
If the pot is deformed or the non-stick coating is worn away, purchase a new pot at your nearest
retailer and replace the old pot with the new one. DO NOT USE POT FROM OTHER SIMILIAR
PRODUCTS.
To avoid damage to the non-stick coating on the removable cooking pot
Avoid tapping or scratching the pan.
Do not put metal spoons or other utensils in the pan.
Do not attempt to clean the pan with scouring powder, steel wool or a nylon-scouring pad. Clean the
pan with a sponge.
Accessories
Wash with dish washing detergent and a sponge. Rinse and wipe water off.
Cooking table
MENU
Cooking time
Time adjustable
Auto
keep warm
Preset
Min
Max
Default
Step (min )
GRAIN
5 min
90 min
28 min
1 min
YES
YES
PILAF
5 min
2 hr
60 min
5 min
YES
YES
FRY
5 min
60 min
15 min
1 min
No
No
MILK PORRIDGE
5 min
90 min
33 min
1 min
YES
YES
BUCKWHEAT
5 min
2 hr
35 min
5 min
YES
YES
SOUP
15 min
8 hr
60 min
5 min
YES
YES
STEAM
5 min
2 hr
15 min
5 min
YES
YES
STEW/BRAISE
20 min
12 hr
40 min
5 min
YES
YES
YOGURT/DOUGH
5 min
12 hr
4 hr
5 min
No
YES
BAKE/BREAD
20 min
4 hr
60 min
5 min
YES
YES

Trouble shooting
Malfunction Inspection
No.
Malfunction
Reasons
How to solve
1
Indica
tor
light is
not on
The
heating
plate is not
heating.
1. The PCB power supply is disconnected.
2. Power supply circuit is damaged.
3. Circuit connection disconnected.
4. Main PCB is damaged.
1. Check that theswitch、socket、fuse and cord are
in good condition.
2. Send to the repair shop.
The
heating
plate is
heating.
Main PCB is damaged.
Send to the repair shop.
2
Indica
tor
light is
on
The
heating
plate is not
heating.
1. Electric heating elements are damaged.
2. Circuit connection disconnects.
3. Power supply circuit is damaged.
Send to the repair shop.
3.
The rice isn’t
cooked enough or
the cooking take
too long.
1. There isn’t enough time set keeping warm is
not enough.
2. The heating plate has deformed.
3. The inner pot deflects to one side.
4. There is something between the inner pot
and the heating plate.
5. The inner pot has deformed.
6. Main PCB is damaged.
7. The main temperature controller is stained.
1. Keep warm as request.
2. If it is slightly deformation, use an abrasive
cleaner to clean. If it is very serious, please send
it to the repair shop.
3. Gently rotate the inner pot to fix the positioning.
4. Use abrasive cleaners to remove any residue.
5. Send to the repair shop and change the inner
pot.
6. Send to the repair shop.
4
The rice is
overcooked or the
cooker does not
enter “keep warm”
automatically.
1. Main PCB is damaged.
2. The main temperature controller is
stained.
1. Send to the repair shop.
2. Use abrasive cleaners to clean main temperature
controller.
5
Porridge overflows.
1. Main PCB is damaged.
2. There is something in the steam valve.
1. Send to the repair shop.
2. Clean steam valve and remove any debris.
6
Boiling does not
occur even when
rice or porridge
cooking for a long
time.
1. Main PCB is damaged.
2. The temperature controller is broken.
Send to the repair shop.