
Operating Notes Customer Support
Online
www.nvisinc.com
E-mail
support@nvisinc.com
Phone
+1
571-201-8095
Power to Ranger must be turned on only after computer (IG) is completely
booted up.
Ranger is equipped with an accelerometer to turn o the displays when the
device is stationary for 2 minutes. Timeout duration and sensitivity may be
adjusted in NVIS Uni Software.
Full product specication, software, and documentation is available at
www.nvisinc.com.
Ranger is intended for use in standard oce environments and is not
designed for outdoor or harsh environmental conditions.
RMA Instructions
All product returns must include a Case
number. Customers can request a Case
number online, via e-mail, or by calling
NVIS and selecting the technical support
menu option. Please keep original
package materials for return shipments
to NVIS. Follow the diagram in the
Packing Contents section of this guide.
Please do not include any accessories.
Adjustments
Step-by-Step
PIN 104698 Rev B, CR-1076
1
Plug the Ranger universal power supply into a standard 110-240 VAC outlet.
2
Connect one or both HDMI adapters to a PC graphics card, using the DVI to HDMI
adapters if needed. A single connection clones the image to both eyes. Use both con-
nectors for stereoscopic applications.
3
Connect the USB cable to the PC.
4
Press and hold the POWER button for 2 seconds.
5
Power LED illuminates to indicate power is on.
6
L and R video LEDs illuminate when correct video format is supplied to left and right
channels, respectively.
Tracker Mount
1
Focus Adjustment Turn eyepieces to adjust focus
2
Brightness Button Cycles through 3 dierent levels of brightness
3
USB Buttons Programmable interaction using USB interface
4
Power Button Powers on/o device
5
Scroll Wheel Programmable interaction using USB interface
6
Interpupillary Distance Adjustment Pivot two halves of device around central hinge (axis) to adjust distance between oculars
1
Existing hole spacing accommodates
the InertiaCube orientation sensors.
Other trackers can be mounted via
custom plate or adhesive.
Consult manufacturer documentation for
optimal motion tracking hardware setup
and conguration.
1
1
2
3
6
2
4
5
124
5
33
6
6