O'jump 685 User manual

18/01/2021
1
N°293
(UK) Assembly Instructions
Sprin Trampette
Ref. : 685

18/01/2021
2
Thank you for buyin this product O'jump. We advise you to read the assembly instructions
carefully. The apparatus is presented in pre-assembled parts for a simplified assembly. We
have desi ned this O'jump product to brin you complete satisfaction. If you need help, the
O'jump team is at your disposal to accompany you.
Warning:
This equipment must only be used by one person at a time and under the supervision of a
qualified individual, with appropriate landin mats.
Usin this equipment for purposes other than those ori inally intended is prohibited.
Recommendations:
- keep these instructions for subsequent reference (inspection, maintenance, etc.).
- periodically carry out predictive maintenance.
- dependin on how much it is used, have the equipment serviced yearly or every few years.
Footprint and weight:
- Apparatus 120x120 cm 35K

18/01/2021
3
Tools needed to assemble the apparatus .
Hardware listin (pre-assembled)
A
X2
Castor Ø38 M8 x 30
X2
B
X10
Ø16x 8.5
D
X10
E
M8
M8 x 40
X8
C
Indexing knob
X2
F
Sprin s
G
X28

18/01/2021
4
List of parts (pre-assembled)
X1
X1
Upp
er
f
rame
Le
without cast
o
r
X1
Le with
cast
o
r
s
X
2
Slidin upri hts
X1
Protection
X1
Bed
X28
Sprin s

18/01/2021
5
Unscrew
and pull
the
indexin knob
to release the slide.
Rotate the feet. Release the knob in
front of the desired position. Lock the
knob by ti htenin .
Repeat the operation for the other
foot.