O.K.I. usa NISHT-Z52O Quick start guide

NISHT-Z520_rev06102008
1
FEATURES
Please read the Operational Manual
before attempting to use this product.
zMPEG4/MJPEG Dual Streaming
z30FPS @ Full D1 Resolution
z1/3” Sony Super HAD CCD
z520 TV Lines
z6.0mm CS Mount Lens
zTwo-way Audio
zSupports 3GPP/ISMA RTSP for Mobile Surveillance
zBundled 32-CH Surveillance Software
z1 Alarm In / 1 Alarm Out
zUPnP (Universal Plug’n’Play) for fast and easy installation
zPoE built-in with IEEE 802.3af Class 0 Support
z12V DC
NISHT-Z52OP
NISHT-Z52O
Operational Manual
Mini Network IP Camera

NISHT-Z520_rev06102008
2
Model NISHT-Z520 NISHT-Z520P
TV System NTSC PAL
Image Sensor 1/3” Sony Super HAD CCD
Minimum Illumination 0.1 Lux @ F1.2
AGC, AES, AWB, Anti Color-Rolling
Electronic Shutter 1/60 ~ 1/100,000 sec 1/50 ~ 1/100,000 sec
Lens 6.0mm CS Mount Lens / F1.8
System ARM9 based 32-bit RISC CPU, 8MB Flash, 64 MB RAM
Embedded OS: Linux 2.4
Video Compression MPEG4, Motion JPEG
Adjustable Bitrate (64Kbps to 2048Kbps), Quality and Bitrate
Video Resolution Up to 30 fps @ 704x480 Up to 25 fps @ 704x576
Video Streaming Simultaneous MPEG4 & MJPEG (Dual Streaming)
Supports Unicast & Multicast
Supports 3GPP/ISMA RTSP (Real Time Streaming Protocol)
Audio Two-way audio (full duplex)
Alarm & Event Built-in multi-window motion detection
Input x 1, Output x 1 for External Alarm & Sensor (DIDO)
Triggered and scheduled events, Pre- and Post-alarm buffer
Supported Protocols TCP/IP, DHCP, PPPoE, ARP, ICMP, FTP, SMTP, DDNS, NTP, UPnP, RTSP, RTP, HTTP, TCP, UDP, 3GPP/ISMA RTSP
Security ID/Password Authentication; SSL Protocol V3.0
Power 12V DC, 1A, Max 6W
PoE PoE (Power over Ethernet) Built-in / Supports Alternative A/B, Class 0, Max 12.95W
Connectors
Ethernet – RJ45 for 10/100 Base-T (with PoE)
12V DC
Input x 1, Output x 1 for External Alarm & Sensor (DIDO)
Analog video output (RCA with RCA-to-BNC converter)
3.5mm Audio Input, 3.5mm Audio Output
Operating Environment 0º ~ 50 ºC (32º ~ 122ºF)
Humidity 20 ~ 80% RH (non-condensing)
Video Surveillance Software Professional surveillance application for viewing, recording and archiving up to 16 cameras
Dimension 79mm x 55mm x 49mm
* Specifications are subject to change without notice
zOne (1) NISHT-Z520/NISHT-Z520P Camera
zOne (1) 6.0mm CS Mount Lens
zOne (1) Mounting Bracket
zThree (3) Mounting Screws
zThree (3) Wall Anchors
* For any returns, please include all components listed above with original packaging in Resalable Condition. Absolutely No
Returns will be accepted if any component is missing/damaged.
Using the Software CD to configure the camera:
Power on your PC and insert the CD-ROM. The setup page should load automatically. If it does not, please select your CD-ROM
drive manually to open the setup page.
Select “Install Software”
GENERAL SPECIFICATIONS
LIST OF COMPONENTS
INSTALLATION
zOne (1) Power Adaptor
zOne (1) Software CD
zOne (1) Operational Manual

NISHT-Z520_rev06102008
3
1. Click “Yes” to initiate installation.
2. Select the language you want to install, and click “Next.”
3. Click “Next” to start installation
4. If you wish to install the software program in an alternative location, click “Browse.” Otherwise, click “Next” to move on to
the next step.
5. Click “Next to proceed.

NISHT-Z520_rev06102008
4
6. Choose the install options, click “Next” to proceed.
7. Click “Install” to start the installation.
8. Click “Finish” to complete the software installation.
Using Intelligent IP Installer:
Launch the program after installation. The following screen shall show up.
The camera list on the left will show all active devices. Select your camera, Click on “Link to IE” to use the camera through
Internet Explorer.

NISHT-Z520_rev06102008
5
1. The first time using your IP Camera, you will see the following message: “To help protect your security, Internet
Explorer…Click here for options”
2. Click on the message and select “Install ActiveX Control.”
NOTE: If you don’t see this
message, please check your
browser’s internet settings.
Browser’s Internet Options ->
Security -> Custom Level
In Security Settings pa
g
e, find
“
Download unsi
g
ned ActiveX
controls.” Change the setting
to “Enable” or “Prompt.”
Enter User name and Password to login to
the IP Camera (Default is admin/admin)
* Viewing Video with your NISHT-Z520. The
following screen shall appear automatically
after successful login.

NISHT-Z520_rev06102008
6
3. Click “Install” to install ActiveX.
4. Congratulations, you can now use the camera to view high-quality video through your web browser.
1. Never point the camera toward the sun
Do not expose the lens directly to the sun or to strong light as this may damage the pick-up device.
2. Handle this camera with care
Avoid any shock or bumping of the camera. Improper handling could damage the camera.
3. Requires a proper operating environment
This camera is designed for indoor use. The allowable temperature range for operation of this camera is between -10°C ~ 50°C and the allowable humidity is
80%RH maximum. To prevent fire or electric shock hazard, do not expose the appliance to rain or moisture.
4. Clean the front face to the pick-up device
It is recommended that the pick-up device surface be cleaned before lens installation or whenever the lens is changed. Cleaning should be done by using a
chamois, a very fine soft cloth, lens tissue, or cotton tipped applicator and ethanol to carefully remove any fingerprint or dust.
5. Check the power source voltage
The power source voltage should be within the specified range. (Camera must meet the specifications). Camera must be connected to a surge protector at all
times.
6. Objects and liquid entry
Never push objects of any kind into this camera as this may touch dangerous voltage points of short out parts that could result in a fire or electric shock.
Never spill any kind of liquid on the video product.
7. Servicing
Do not attempt to service this video product by yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all
service to qualified servicing personnel.
8. Damage requiring service
Unplug this video product from the wall outlet and refer service to qualified servicing personnel under the following conditions:
a. If liquid has been spilled, or objects have fallen into the video product.
b. If the video product has been dropped or the cabinet has been damaged.
c. When the video product exhibits a distinct change in performance.
O.K.I.USA Products are covered under warranty for two (2) years from the date of purchase. The warranty will automatically be voided if any of the following
occurs:
1. Camera sticker is removed
If the camera sticker is removed, we will not be able to confirm any information regarding when and where the product was purchased. We have no other way
to verify the purchase record without the serial number on the camera sticker; therefore, it should not be removed.
2.
Camera is modified in any way
If the camera is scratched, damaged, or modified in a manner not described in this manual, the warranty will be voided immediately. It is the customer’s
responsibility to keep the camera in good condition.
IMPORTANT NOTE
WARRANTY