Safety Warnings Safety Warnings
Thank you for choosing Obaby. This cot conforms to BS EN 716-1:2017. To ensure that your cot
bed is used in accordance with these instructions, please read them fully.
Your child’s safety may be affected if you do not follow these instructions.
WARNING: A child’s safety is your responsibility.
WARNING: Assembly should be carried out by a competent adult only.
WARNING: Do not use more than one mattress in the cot.
WARNING
WARNING: Do not use this cot if any part is broken, torn or missing. Use only spare parts
WARNING
strings, blind/curtain cords etc.
• Please be aware that the lowest base position is the safest and the base should always be used in
that position as soon as the baby is old enough to sit unaided.
• The thickness of the mattress chosen should be such that the internal height (surface of the
mattress to the upper edge of the cot frame) is at least 500mm when the base is set in the lowest
position and a minimum of 200mm when the cot base is set in the highest position.
• We recommend you use the Obaby Mattress Size 100 x 50 cm for this cot. The mattress should
be no more then 30mm shorter or narrower than the internal length or width of the cot.
order.
longer be used.
screws are loose, as a child could trap parts of the body, or clothing (e.g. ribbons, drawstrings,
necklaces) this could lead to strangulation.
• Wood is a natural material, the colour will darken with age.
ROUTINE CARE & MAINTENANCE
– For cleaning, use only a mild detergent and warm water.
– DO NOT USE BLEACH.
needed.
any products without prior notice. If you need any assistance please contact your Obaby retailer
from whom you purchased your product, who will take appropriate action.
2 3
obaby.co.uk obaby.co.uk
