OBaby Belton User manual

Sign Up
PLEASE READ THESE INSTRUCTIONS
CAREFULLY BEFORE USING THIS PRODUCT
IMPORTANT
KEEP FOR FUTURE REFERENCE
Instructions
Version: R1-0
Chest / Cot Top
Changer

32mm
additional tools required (not included)
8
Parts List 3
www.obaby.co.uk
A
A
B
B
C
C
D
Safety Warnings Parts List
Thank you for choosing Obaby. This cot top changer conforms to BS EN
12221:2008+A1:2013. To ensure that your cot top changer is used in accordance with
these instructions, please read them fully.
Your child’s safety may be affected if you do not follow these instructions.
WARNING: Do not leave the child unattended.
WARNING: Assembly should be carried out by a competent adult only.
• The cot top changer must be used on a level and stable surface.
• Never move the cot top changer with the child on it.
• Be aware of the risk of open re and other sources of heat, such as electric bar res,
gas res, etc. in the near vicinity of the cot top changer.
• Do not use the cot top changer if any part is broken or missing. Use only spare parts
approved by the manufacturer.
• We recommend you use a changing mat with maximum dimension of 85cm x 50cm,
placing the mat evenly inside the cot top changer.
• The changing surface is designed for use from birth until 12 months, max weight
11kg.
• All assembly ttings should be tightened properly and care should be taken to ensure
that no screws are loose, as a child could trap parts of the body, or clothing (e.g.
ribbons, drawstrings, necklaces) this could lead to strangulation.
• Regularly check that all ttings and components of the cot top changer are fully
tightened and in working order.
• Wood is a natural material, the colour will darken with age.
• During assembly children should be kept away from the product due to possible risk of
injury.
ROUTINE CARE & MAINTENANCE
– For cleaning, use only a mild detergent and warm water.
– DO NOT USE BLEACH.
– DO NOT USE any abrasive substances.
– Take care when handling or moving furniture, careless handling can damage wooden
furniture.
Due to constant updating and improvements, some components may occasionally differ
slightly from the images shown in these instructions. We reserve the rights to change
the specications of any products without prior notice. If you need any assistance please
contact your Obaby retailer from whom you purchased your product, who will take
appropriate action.
2 3
www.obaby.co.uk www.obaby.co.uk

Stage 1
Stage 2
www.obaby.co.uk
Assembly
4
www.obaby.co.uk
A
A
P3
P5
A
C
B
C
B
P4
P1
P2
C
Stage 3
Stage 4
Assembly 5
www.obaby.co.uk
D
A
P1
P4
Assembly Assembly
4 5
www.obaby.co.uk www.obaby.co.uk

Stage 5
www.obaby.co.uk
Assembly
Note: Secure the cot top changer to the cot with both safety straps provided
6
www.obaby.co.uk
Stage 6
Assembly 7
www.obaby.co.uk
P6
Note: If it is decided the cot top changer will be permanently used on the Belton
Chest of Drawers then it is advised it is fixed on using both screws P6 ”
Assembly Assembly
6 7
www.obaby.co.uk www.obaby.co.uk