Ocean Breeze OBZ-10ESN User manual

Before using your air conditioner, please read
this manual carefully and keep it for future reference.
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
ROOM AIR CONDITIONER
-
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
ROOM AIR CONDITIONER
-
Before using this product,
please read the instructions
carefully and keep for future reference.
For any service needs, call 1-866-277-7878
www.oceanbreezecomfort.com
OWNER'S MANUAL
MODEL: OBZ-10ESN
OBZ-12ESN

CONTENTS
Important Safety lnstructions ............................................................1-3
Installation lnstructions ......................................................................4-8
Air Conditioner Features ...................................................................9-11
Care and Cleaning ...........................................................................11-12
Troubleshooting Tips......................................................................12-13
Normal Sounds ......................................................................................9

IMPORTANT SAFETY INSTRUCTIONS
Inside you will find many helpful hints on how to use and maintain your air conditioner
properly. Just a little preventive care on your part can save you a great deal of time
and money over the life of your air conditioner. You'll find many answers to common
problems in the chart of Troubleshooting Tips. If you review our chart of Troubleshooting
Tips first, you may not need to call for service at all.
Improper operation due to ignoring of instructions may cause harm or property
This symbol indicates the possibility of death or serious injury.
Always do this.
Never do this.
CAUTION
This symbol indicates the possibility of injury or damage to property.
WARNING
WARNING
Plug in power plug
properly.
Do not modify power cord length or share the
outlet with other appliances.
Always ensure effective
grounding.
Unplug the unit if strange
sounds, smell, or smoke
Keep firearms away.
Ventilate room before operating air conditioner if there is
a gas leakage from another appliance.
This may cause electric shock or fire due to heat generation.
Incorrect grounding may cause
electric shock.
This may cause fire and electric
shock.
This may cause fire.
This may cause explosion, fire and burns.
This may cause electric shock or
fire due to heat generation.
This may cause electric shock.
This may cause failure of machine
or electric shock.
This may cause fire and electric
shock.
This may cause fire and electric
shock.
This may cause electric shock or fire.
If the power cord is damaged, it must be replaced by the
manufacturer or an authorised service center.
This could be harmful to your health.
Incorrect installation may cause
fire and electric shock.
This may cause electric shock.
This may cause an explosion or fire.
This may cause failure and electric shock.
Do not operate or stop the
unit by inserting or pulling
out the power plug.
Do not operate with wet
hands or in damp
environment.
Do not allow water to touch
electric parts.
Do not use the socket if it is
loose or damaged.
Do not use the power cord
close to heating appliances.
Do not damage or use an unspecified power
cord.
Do not point the airflow at room occupantsAlways install circuit
breaker and a dedicated
power circuit.
Do not open the unit during operation.
Do not use the power cord near flammable gas
or combustibles, such as gasoline, benzene,
thinner, etc.
Do not disassemble or modify unit.
!
!
!
!
!
!
!
READ THIS MANUAL
1
for long periods of time.
is detected.
To prevent injury to the user or others, the following instructions must be followed.
damage. Below are definitions for symbols used throughout the manual.
Otherwise, this may cause
electric shock or fire due to
excess heat generation.

When the air filter is to be
removed, do not touch the metal
parts of the unit.
This may cause an injury.
Do not clean unit when power is on
as this may cause fire and electric
shock or injury.
Operation with windows opened
may cause water damage and
soaking of household furniture.
When the unit is to be cleaned,
switch off, and turn off the circuit
breaker.
Use caution when unpacking and
installing. Sharp edges could cause injury.
Do not clean the air conditioner
with water.
Water may enter the unit and
degrade the insulation. This may
cause an electric shock.
This may cause injury or damage.
This may cause electric shock and
damage.
Do not put a pet or house plant
where it will be exposed to direct
air flow.
Ventilate the room well when
used together with a stove, etc.
An oxygen shortage may occur.
Do not use this air conditioner to
preserve precision devices, food,
pets, plants, and art objects. This may
cause deterioration of quality, etc.
This may cause failure of product
or fire.
Do not use for special purposes.
If water enters the unit, turn the unit off at the power
outlet and switch off the circuit breaker. Isolate power
supply by taking the power-plug out and contact a
qualified service technician.
!
!
!
!
This may cause failure of
appliance or an accident.
Appearance may be deteriorated
due to change of product color or
scratching of its surface.
If bracket is damaged, there is
danger of unit falling.
There is danger of fire or electric
shock.
Operation without filters may cause
failure.
This contains contaminants and
could make you sick.
Stop operation and close the
window during a storm or
hurricane.
!
Do not use strong detergent
such as wax or thinner, only use
a soft cloth.
Ensure that the installation bracket of the
outdoor appliance is not damaged due
to prolonged exposure.
Hold the plug by the head of the
power plug when unplugging.
!
Turn off the main power
switch when not using the
unit for a long time.
!
!
!
Always insert the filters securely.
Clean filter once every two weeks.
!
Do not place heavy objects on the power
cord and ensure that the cord is not
compressed.
Do not drink water drained
from air conditioner.
This appliance is not intended for use by persons
with reduced physical, sensor or mental capabilities,
Children should be supervised to ensure that they
do not play with the appliance.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
CAUTION
2
CAUTION
Do not place obstacles around
air-inlets or inside of air-outlets.
The appliance should be installed in accordance
with local wiring regulations.
Do not operate your air conditioner in a wet room
such as a bathroom or laundry room.
Contact the authorised service technician for
repair or maintenance of this unit.
Contact the authorised installer for installation
of this unit if you can't do it by yourself.
IMPORTANT SAFETY INSTRUCTIONS
unless they are supervised by a responsible adult
or considered capable enough to operate the
appliance safely.

NOTE:
The power supply cord with this air
conditioner contains a current detection
device designed to reduce the risk of fire.
Please refer to the section ‘Operation of
Current Detection Device’ for details. In
the event that the power cord is damaged
and cannot be repaired, it must be
replaced with a replacement from the
Product Manufacturer.
WARNING
Avoid fire hazard or electric shock. Do not
use an extension cord or an adaptor plug.
Do not remove any prong from the power
cord.
Grounding type wall
receptacle
Do not, under any
circumstances, cut,
remove, or bypass
the grounding prong.
Power supply cord
with 3-prong grounding plug
and current detection device
WARNING
For Your Safety
WARNING
Prevent Accidents
WARNING
Electrical Information
Do not use gasoline or store any other flammable vapors and liquids in the vicinity
of this or any other appliance.
Operation of Current Detection Device
( rrent detection
device )
The power supply cord contains a current detection device
that senses damage to the power cord. To test your power
supply cord do the following:
1. Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the plug
head. Press the TEST button and you will notice a click as
the RESET button pops out.
3. Press the RESET button again and you will notice a click
as the button engages.
4. The power supply cord is now supplying electricity to the
unit. (On some products this is also indicated by a light on
the plug head.)
3
To reduce the risk of fire, electrical shock, or injury to persons when using your
air conditioner, follow basic precautions, including the following:
Be sure the electrical service is adequate for the model you have chosen. This
information can be found on the serial plate, which is located on the side of the
the cabinet and behind the grille.
If the air conditioner is to be installed in a window, you will probably want to clean
both sides of the glass first. If the window is a triple-track type with a screen panel
included, remove the screen completely before installation.
Be sure the air conditioner has been securely and correctly installed according to
the installation instructions in this manual. Save this manual for possible future
use in removing or installing this unit.
When handling the air conditioner, be careful to avoid getting cut from sharp
metal fins on front and rear coils.
To reduce the risk of fire, electrical shock, or injury to persons when using your
air conditioner, follow basic precautions, including the following:
Be sure the air conditioner is properly grounded. To minimize shock and fire
hazards, proper grounding is important. The power cord is equipped with a
three-prong grounding plug for protection against shock hazards.
Your air conditioner must be used in a properly grounded wall receptacle. If the
wall receptacle you intend to use is not adequately grounded or protected by a
time delay fuse or circuit breaker, have a qualified electrician install the proper
receptacle. Ensure the receptacle is accessible after the unit installation.
Do not run air conditioner without side protective cover in place.This could
result in mechanical damage within the air conditioner.
Do not use an extension cord or an adapter plug.
Cooling
operation
Indoor temp:
IMPORTANT SAFETY INSTRUCTIONS
NOTE:
Do not use the current detection device to turn the unit on or off.
Always make sure the RESET button is pushed in for
correct operation.
The power supply must be replaced if it fails to reset when
either the TEST button is pushed or it cannot be reset. A
new one can be obtained from the product manufacturer.
If power supply cord is damaged and cannot be repaired.
It MUST be replaced by the product manufacturer.
NOTE:This air conditioner is designed to be operated
under normal temperature conditions as follows:
64-109OF/18-43OC (64-125OF/18-52OC
Outdoor temp:
for special tropical models)
O
O
62-90 F/17-32 C
Note: Performance may decrease outside of these
operating temperature ranges.
This only applies to units with cu

getting
electrician.
OFFSET
EXTERIOR
WALL
INNER
WINDOW SILL
INTERIOR
WALL

15.

Step 2. Remark a line on the provide R1 insulation
panel according to a length 1/8”(3mm) less than
the width measured in step 1, then cut the R1
insulation panel along the line (Fig.12).

NORMAL SOUNDS
Sound of Rushing Air
At the front of the unit, you may
hear the sound of rushing air
being moved by the fan
High Pitched Chatter
High efficiency compressors
may have a high pitched chatter
during the cooling cycle.
Gurgle/Hiss
Gurgling or hissing noise may
be heard due to refrigerant
passing through evaporator
during normal operation.
Pinging or Switching
Droplets of water hitting condenser
during normal operation may cause
pinging or switching sounds.
Vibration
Unit may vibrate and make noise
because of poor wall or window
installation.
All the illustrations in this manual are for explanation purposes only.
The air conditioner you have may be slightly different.
NOTE:
AIR CONDITIONER FEATURES
Before you begin, thoroughly familiarize yourself with the control panel as shown below and all its
functions, then follow the symbol for the functions you desire. The unit can be controlled by the unit
control alone or with the remote.
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
ADJUSTS
TEMPERATURE
OR TIME
ADJUSTS
TEMPERATURE
OR TIME
DISPLAYS
TEMPERATURE
OR TIME OR ERRORCODES
ACTIVATES
TIMER
CHECK FILTER
RESET BUTTON
SETS MODE
ENERGY
SAVER MODE
SLEEP MODE
SET FAN SPEED
TURNS UNIT
ON OR OFF
UNIT CONTROL
Temp Temp
Timer Timer
On
Off
Sleep
Check
Filter
Timer
Auto
Cool
Dry
Fan
Low
Auto
Med
High
Fan
Mode
Follow
Me
Energy
Saver On/Off
FOLLOW ME INDICATOR
(on some models)
9
TO TURN UNIT ON OR OFF:
Press ON/OFF button to turn unit on or off.
TO CHANGE TEMPERATURE SETTING:
Press / UP/DOWN button to change
temperature setting.
REMOTE SIGNAL
RECEPTOR
NOTE:
a
automatically under Cool, Dry, Auto (only Auto-Cooling)
nd Auto-Fan) modes.
The unit will initiate the Energy Saver function
NOTE:Press or hold either UP( ) or DOWN ( ) button
until the desired temperature is shown on the display.
This temperature will be automatically maintained
O O O O
anywhere between 62 F(17 C) and 86 F(30 C). If
you want the display to show the actual room
temperature, see To Operate on Fan Only section.

AIR CONDITIONER FEATURES
TO ADJUST FAN SPEEDS:
Press to select the Fan Speed in four steps-Auto,
Low, Med or High. Each time the button is pressed,
the fan speed mode is shifted. On Dry mode, the fan
speed is controlled at Low automatically.
SLEEP FEATURE:
Press Sleep button to initiate sleep mode. In
this mode the selected temperature will increase by
O O
2 F/1(or 2) C 30 minutes after the mode is selected.
The temperature will gradually adjust the temperature
by 2 degrees in one hour to save energy at a
comfortable temperature. This new temperature
will be maintained for 6 hours before it returns to the
originally selected temperature.
programmed. The Sleep mode program can be
cancelled at any time during operation by pressing
the Sleep button again.
Press Check filter button to initiate this feature.
This feature is a reminder to clean the Air Filter for
more efficient operation. The LED(light) will illumi-
nate after 250 hours of operation. To reset after
cleaning the filter, press the Check Filter button and
the light will go off.
CHECK FILTER FEATURE:
ENERGY SAVER FEATURE:
Press Energy saver button to initiate this function.
This function is available on COOL, DRY, AUTO
(only AUTO-COOLING and AUTO-FAN) modes.The
fan will continue to run for 3 minutes after the
compressor shuts off.The fan then cycles on for 2
minutes at 10 minute intervals until the room
temperature is above the set temperature, at which
time the compressor turns back on and Cooling
FOLLOW ME FEATURE:(on some models)
Light flashing
Follow
M e
Energy
Saver On/Off
This feature can be activated from the remote
control ONLY. The remote control serves as
a remote thermostat allowing for the precise
temperature control at its location.
.starts
To activate the Follow Me feature, point the remote
control towards the unit and press the Follow Me
button. T
If the unit does
rnot eceive the Follow Me signal during 7 minut e
interval, the unit will beep to indicate the Follow Me
mode has ended.
he remote splay the actual temperature
location. The remote control will send this signal
to the air conditioner at
preyou ss the Follow Me button again.
will di
at its
every 3 minute interval until
TO SELECT THE OPERATING MODE:
t
T
i
o
m
c
e
h
y
o
o
o
u
s
p
e o
re
p
s
e
s t
ra
h
t
e
in
b
g
u
m
tto
o
n
d
,
e
a
, p
m
re
o
s
d
s
e is s
M
e
o
le
d
c
e
t
b
ed
u
i
tt
n
o
a
n.Each
s
in
eq
dic
u
a
e
t
n
o
c
r
e
l
t
ig
h
h
a
t
t
w
go
il
e
l
illum
s from
in
A
at
u
e
to
a
,
n
C
d
o
re
ol
m
, D
ai
r
n
y
o
a
n
n
o
d F
nc
a
e
n
t
. T
he
he
mode is selected.
The unit will automatically
initiate
the Energy Saver
function under Cool, Dry, Auto (only Auto-Cooling and
Auto-Fan) modes.
To operate on Auto feature:
When you set the air conditioner in AUTO mode, it will
automatically select cooling or fan only operation depending
on the temperature you have selected and the room
temperature.
The air conditioner will automatically adjust around the
temperature point set by you.
a
In
u
t
to
h
m
is m
ati
o
c
d
a
e
ll
,
y
t
a
h
t
e
a
f
s
an
p
s
ee
p
d
e
a
ed
c
c
co
a
r
n
d
n
i
o
n
t
g
b
to
e
t
a
h
d
e
j
r
us
o
t
o
e
m
d, it starts
temperature.
To operate on Fan Only:
Use this function only when cooling is not desired, such
as for room air circulation or to exhaust stale air (on
some models). (Remember to open the vent during this
function, but keep it closed during cooling for maximum
cooling efficiency.) You can choose any fan speed you
prefer.
During this function, the display will show the actual
room temperature, not the set temperature as in the
cooling mode.
In Fan only mode, the temperature is notadjusted.
T
In
o
t
o
hi
p
s m
er
o
a
d
t
e
e
,
o
th
n
e
D
ai
r
r
y
c
m
on
o
d
d
iti
e
o
:
ner will generally operate
in the form of a dehumidifier. Since the conditioned
s
coo
pac
li
e
n
i
g
s
w
a
i
c
ll c
lo
o
s
n
e
t
d
in
o
u
r
e
s
.
ealed area, some degree of
TIMER: AUTO START/STOP FEATURE:
When the unit is on or off, first press Timer button, the
TIMER ON indicator light will illuminate. This i ndicates the
Auto Start program is initiated.
When the time of TIMER ON is displayed, press the Timer
button again, and the TIMER OFF indicator light
will
illuminate. This indicates the Auto Stop program is initiated.
Press or hold the UP or DOWN button to change the Auto
t
w
im
ill
e
co
by half hour/hour
e thtnwodtnu
i
im
n
e
c
r
re
e
m
m
e
a
n
in
ts
in
u
g
p
u
t
n
o
t
2
il s
4 h
ta
o
rt
u
.
rs.The control
w
t
T
e
h
i
m
l
e
l a
s
pe
u
e
t
r
l
o
a
e
m
t
c
u
t
a
r
e
e
t
d
i
s
c
t
a
e
im
l
t
l
t
y
e
i
r
n
w
g
e
o
v
il
e
l r
r r
r
e
t
o
b
g
o
i
a
s
m t
c
te
k t
e
r i
o
m
n
d
p
5
i
e
s
s
r
p
e
a
l
t
c
a
u
o
y
r
n
e
th
d
w
e
s
p
, a
he
r
n
e
n t
d
vi
h
t
o
h
e
u
u
e
s
s
n
y
it
s
i
t
s
em
on.
(when the unit is off,there is no display.)
Turning the unit ON or OFF at anytime or adjusting the
timer setting to 0.0 wil l cancel the Auto Start/Stop timed
program.
10
This ends the Sleep
mode and the unit will continue to operate as originally

AIR CONDITIONER FEATURES
Temp Temp
Timer Timer
Displays
O O
hows the set temperature in C or F and the
Auto-timer settings. While on Fan only mode, it
shows the room temperature.
DISPLAYS:
-Evaporator temperature sensor error-Unplug the
unit and plug it back in. If error repeats, call for
service.
NOTE: is displayed as shown in the above picture.
HS -Electric heating sensor error-Unplug the unit and
plug it back in. If error repeats, call for service.
Error codes:
AS-Room temperature sensor error-Unplug the unit
and plug it back in. If error repeats, call for service.
NOTE: In Fan only mode, it will display LO or HI .
If the unit breaks off unexpectedly due to the power
will restart with the previous function setting
automatically when the power resumes.
The louvers will allow you to direct the air flow Up or
Down(on some models) and Left or Right throughout
the desired Up/Down direction is obtained.
Move the Levers from side to side until the desired
Left/Right direction is obtained.
Levers
Air Direction
DISPLAYS:
NOTE:
Air Directional Louvers
ADDITIONAL THINGS YOU SHOULD KNOW
Now that you have mastered the operating procedure,
here are more features in your control that you should
become familiar with.
The Cool circuit has an automatic 3 minutes delayed
start if the unit is turned off and on quickly.
This prevents overheating of the compressor and
possible circuit breaker tripping.The fan will
continue to run during this time.
The control is capable of displaying temperature in
degrees Fahrenheit or degrees Celsius. To convert
from one to the other, press and hold the Left and
Right Temp/Timer buttons at the same time for 3
seconds.
Fresh Air Vent Control
:)no( 10000~12000Btu/h models
Fig. A (VENT CLOSED) Fig. B (VENT OPEN)
Fig. C (VENT & EXHAUST
OPEN)
The Fresh Air Vent allows
the air conditioner to:
1. Recirculate
Closed
(See Fig.A)
2. Draw fresh air into the
room- Vent Open
(see Fig.B)
3. Exchange air from the
room and draw fresh
air into the room - Vent
and Exhaust Open
(see Fig.C)
CARE AND CLEANING
CAUTION
Clean your air conditioner occasionally to keep it looking
new. Be sure to unplug the unit before cleaning to
prevent shock or fire hazards.
Air Filter Cleaning
The air filter should be checked at least once a month to see
if cleaning is necessary. Trapped particles in the filter can
build up and cause an accumulation of frost on the cooling
coils.
11
outage, it
the air
inside - Vent
S
the room as needed. Pivot the horizontal louvers until

CARE AND CLEANING
Air Filter Cleaning
Note: Never use hot water over 40 C(104 F) to clean the
air filter. Never attempt to operate the unit without the air
filter.
Winter Storage
If you plan to store the air conditioner during the winter,
remove it carefully from the window according to the
installation instructions. Cover it with plastic or return it to
the original carton.
Cabinet Cleaning
Be sure to unplug the air conditioner to prevent shock or fire
hazard. The cabinet and front may be dusted with an oil-free
cloth or washed with a cloth dampened in a solution of warm
water and mild liquid dishwashing detergent. Rinse thoroughly
and wipe dry.
Never use harsh cleaners, wax or polish on the cabinet front.
Be sure to wring excess water from the cloth before wiping
around the controls. Excess water in or around the controls
may cause damage to the air conditioner.
Plug in air conditioner.
TROUBLESHOOTING TIPS
Before calling for service, review this list. It may save you time and expense. This list includes common
occurrences that are not the result of defective workman-ship or materials in this appliance.
Solution
Air conditioner
does not start
Wall plug disconnected. Push plug firmly into wall outlet.
House fuse blown or circuit breaker tripped. Replace fuse with time delay type or
reset circuit breaker.
Problem
Air from unit does
not feel cold
enough
Set to a Lower temperature.
O O
Room temperature below 62 F(17 C ). Cooling may not occur until room temperature
O O
rises above 62 F(17 C).
Thermostat set too cold for night-time cooling. To defrost the coil, set to FAN ONLY
mode. Then, set temperature to a Higher setting.
Temperature sens hind air filter element touching cold coil. Keep away from the cold
coil.
Air filter may be dirty. Clean filter. Refer to Care and Cleaning section. To defrost,
set to FAN ONLY mode.
Power is OFF. Turn power ON.
Air conditioner
cooling, but room
is too warm- ice
forming on cooling
coil behind
decorative front.
O O
Outdoor temperature below 64 F(18 C). To defrost the coil, set FAN ONLY mode.
Compressor stopped when changing modes. Wait for 3 minutes after set to the COOL
mode.
12
Push the vent handle to the Vent Closed position
(where applicable). Open the front panel.
Take the filter by the center and pull up and out.
Wash the filter using liquid dishwashing detergent and warm
water. Rinse filter thoroughly. Gently shake excess water
from the filter. Be sure the filter is thoroughly dry before
replacing. Or, instead of washing you may vacuum the filter
clean.
or be
Current Detection Device on the power plug may have tripped. Press the RESET button.

TROUBLESHOOTING TIPS
Solution
Problem
Dirty air filter- air restricted. Clean air filter. Refer to Care and Cleaning section.
walls, ceiling, floor and furniture.
Air conditioner
cooling, but room
is too warm- NO
ice forming on
cooling coil behind
decorative front.
Temperature is set too high, set temperature to a lower setting.
Air directional louvers positioned improperly. Position louvers for better air distribution.
Front of unit is blocked by drapes, blinds, furniture, etc. - restricts air distribution.
Clear blockage in front of unit.
Air conditioner turns on
and off rapidly
Noise when unit is
cooling
Water dripping
INSIDE when
unit is cooling.
Improper installation. Tilt air conditioner slightly to the outside to allow water drainage.
Refer to installation instructions - check with installer.
Dirty air filter- air restricted. Clean air filter.
Air movement sound. This is normal . If too loud, set to a slower FAN setting.
Outside temperature extremely hot. Set FAN speed to a Higher setting to bring air past
cooling coils more frequently.
Window vibration - poor installation. Refer to installation instructions or check with installer.
Water dripping
OUTSIDE when
unit is cooling.
Remote Sensing
Deactivating
Prematurely
(some models)
Remote control not located within range. Place remote control within 20 feet
and pointed in the general direction of the air conditioner unit.
Remote control signal obstructed. Remove obstruction.
Room too cold
Set temperature too low. Increase set temperature.
Unit removing large quantity of moisture from humid room. This is normal during
excessively humid days.
13
An open door, window, or register may allow cold air to escape. Close any doors,
windows, or registers.
The room may be too warm. Allow additional time to remove Stored heat from

The design and specifications are subject to change without prior notice for product
improvement. Consult with the sales agency or manufacturer for details.