
Odyssey Products, Inc.
5845 Oakbrook Parkway, Suite G / Norcross, GA 30093 / Phone: 770.825.0243 / Fax: 770.825.0245
Odyssey Model SCI-650
Solar Cell Input Adapter for CP650
(Note: Also works with CP500, USL JSD-80, and DTS XD10P)
The SCI-650 is a breakout adapter card that provides terminal connectors that will accept
stripped wires from the optical solar cell.
Plug the SCI-650 onto the DB9 Optical Input 1 connector. For two-projector systems,
you will need another SCI-650 card for Optical Input 2.
When terminating wires to the SCI-650 do not cross the Left and Right plus, minus or
shield (ground) wires.
There are terminals provided for the bipolar power supply (see the CP650 Installation
Manual). These terminals supply backup DC voltage for optical preamplifiers in the event the
CP650 switches to bypass operation during a show.
(Actual board color may be green.)
Terminals and Pin configuration
GND DB9 pin 9
-14 (VDC) DB9 pin 8
+14 (VDC) DB9 pin 7
GND (R) DB9 pin 6
R- DB9 pin 5
R+ DB9 pin 4
GND (L) DB9 pin 3
L- DB9 pin 2
L+ DB9 pin 1
These terminals
are not used with
the JSD-80 or the
XD10P