OK-Computers OBD-Saver VAG User guide

pictured mounting
instruction under
www.obd-saver.de
Mounting Instruction
OBD-Saver
VAG
Description :
The OBD Saver disables effectively every access to ECUs via OBD –Interface (e.g. electronic
immobilizer). The OBD –interface is locked with the OBD Saver. Thus connecting any device
to the OBD interface is impossible and the connection to the car their fore denied.
When locked by the OBD Saver your car is protected very effectively. The control unit which
controls the ignition of your car cannot be deactivated via OBD. From this time on your car
will only start with the original ignition keys!
Scope of delivery :
1x OBD-Saver enclosure including the lock
2x keys
1x allen wrench 2,5
2x allen srew M3 + 1x spare screw
2x window sticker
Mounting :
• put the lower lock part onto the OBD
socket jack (mounting is possible only in
one specific position!)

1. push both hooks entirely into the OBD
socket jack
2. turn the hooks towards the OBD
socket jack and make shure that they
are centrical*.
Pull the hooks into the holes of the
OBD socket jack
3. push the brackets under the hooks
•put the upper lock part onto the mounted
lower part
(works in both directions)
• mount both allen screws (2x) M3 and turn them on hand-tight
• close the OBD lock and remove the key
dismounting: in reverse sequence. Please note that the hooks have to point in the notch
direction!
Your car is OBD secured
*Turning the hooks should be possible without great drag. For the first time of installation u might want to use a small pair of tongs for
support (use extreme caution!). Please make sure that no cable on the back is broken during this process. We assume no liability for any
kind of damage!

Mounting
tip

If you mount the lower part of the OBD Saver VAG as in the picture, you will no longer fall out
the sliding pieces and the hooks.



If you have trouble turning or pulling the hooks have, then try the problematic hook
(usually the right) around 270 ° rotating instead of 90 °.


We recommend for assembly or alignment of the hook a small pair of pliers.

Assembly sequence
VAG