Oladance B2 User manual

Oladance Wearable Stereo B2Quick Start Guide

Touch control areaBluetooth LED light Charging LED indicator Type-C portProduct Introduction Open case lid. Bluetooth is ready to pair when lights on earbuds start slow blinkingGet StartedIn the boxEarbuds x 1 QSGCase x 1 USB Type-C cable x 1Red light flashes all the time when charging and be off when it's fully charged.

Clear Bluetooth pairing listTap and hold both buds at the same time for 5s Bluetooth Discovery Mode Tap and hold 2s on both buds at the same time You think is that all?Download Oladance APP to enjoy more customization and cool feature.Let's have fun with your Oladance Wearable Stereo!Slide Forward: Volume up Slide Back: Volume downControl MusicMake Phone call Slide Forward: Volume up Slide Back: Volume down
x3
Active voice assistant
x2
Control MusicTap twice: Left bud: Previous trackRight bu: Next trackMake Phone call Tap Twice: End or decline a call
x1
Control MusicTap once: Play / PauseMake Phone call Tap Once: Answer a call

How to wear it?11. Pick up 22. Rotate along ear curve3. Check fit34. You are all set4

Disposal and Recycling InformationThis symbol (with or without a solid bar) on the device, batteries (included), and / or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter or cable) and batteries should not be disposed of as household garbage.Battery warningThe built-in lithium battery of the product is forbidden to be disassembled, impacted, extruded or put into fire. The battery under the very low air pressure may result in explosion or flammable liquid or gas leakage. Avoid the battery in a high-temperature environment or being exposed to strong sunlight to avert explosion. Don't use the battery continuously in case of serious ballooning. The battery shall be handled pursuant to the local regulations and shall not be disposed as household garbage. Don't try to repair, remove or refit the battery. The explosion may happen if the battery is replaced by the one subject to incorrect model. Don't compress or puncture the battery with hard object. The battery leakage, overheating or outbreak of a fire may occur if the battery is destroyed.Declaration of Conformity:Hereby, Shenzhen Dancing Tech Co., Ltd., declares that this device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.oladance.comSAR: RF exposure information: The EIRP power of the device at maximal case is below the exempt condition, 20mW specified in EN 62479: 2010. RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC Council Recommendation (1999/519/EC).Basic ParametersCharging timeWorking frequencyRated power2 Hours2400-2483.5MHz15mWProduct name Product model Bluetooth version Bluetooth 5.3OLA06Oladance Wearable Stereo B2Bluetooth protocol HFP/A2DP/AVRCP/HSPCharging interface Type-COperation temperature: 0~45°C Input: 5.0V 1A

FCC StatementThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit di฀erent from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help important announcement.RF ExposureThe portable device is designed to meet the requirements for exposure to radio waves established by the FCC RF exposure guidelines. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value is measured at a distance of 0mm between the radiator and the Head. The highest reported Head SAR value: 0.66W/kg.RF ExposureThe portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value is measured at a distance of 0mm between the radiator and the Head. The highest reported Head SAR value: 0.66W/kg.Le dispositif portable est conçu pour répondre aux exigences d’exposition aux ondes radio établies par lise. Ces exigences fixent une limite das de 1,6 W/kg en moyenne sur un gramme de tissu. La valeur das la plus élevée est mesurée à une distance de 0mm entre le radiateur et la tête. Le das maximal déclaré est de 0,66 w /kg.FCC ID：2A9AR-OLA06L  FCC ID：2A9AR-OLA06R IC：29727-OLA06L IC：29727-OLA06RHVIN:OLA06L HVIN:OLA06R XXXXX CMIIT ID：XXXXXXXX
Important Note:Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Warning:
1. Don’t place the product into a liquid environment or avoid the product exposed to high humidity2. Avoid extrusion to avert the damage to the product3. Don’t attempt to dismantle the product. Put the product in a cool and dry place to keep it dry if stored for a long time4. Avoid touching the strong magnet to prevent the magnetic headset from being demagnetized.5. Avoid the dusty, wet and dirty environment where the electronic circuit of the equipment may be damaged if being used.6. Don’t Use the equipment at the moment of thunderstorm because the thunderstorm may incur equipment fault or shock hazard.7. Don’t use the equipment when riding a motorcycle or a bicycle,driving a car or crossing the road to ensure your safety.8. Keep the equipment out of reach of children or pets to avert the damage.9. Don’t wash the equipment with chemical cleanser or strong detergent Don’t Listen to the voice under high sound pressure and high volume for a long time to prevent the possible hearing impairment when the headset is used.
-English: "
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of the device."
- French: "
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil nedoit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.