Olmo Alpic Series User manual

CR183-RG57A3(B)
16117000000854
20160830
www.olmo-comfort.com
ON/OFF
TEMP
SHORT
CUT
TIMER
ON
TIMER
OFF
MODE
FAN
SLEEP
TRUBO
FRESH
CLEAN LED
FOLLOW
Quick Start Guide
SPLIT AIR CONDITIONER
WITH HEAT PUMP

1
CONTENTS
2
Rated Voltage 3.0V (Dry batteries R03/LR03X2)
Environment
Signal Receiving Range
2
3
4
5
6
13
Remote Control Specifications
Function Buttons
Handling the Remote Control
Remote LCD Screen Indicators
How to Use the Basic Functions
How to Use the Advanced Functions
Remote Control Specifications
ON/OFF
TEMP
SHORT
CUT
TIMER
ON
TIMER
OFF
MODE
FAN
SLEEP
TRUBO
FRESH
CLEAN LED
FOLLOW
26,2 ft ( 8 m)
23 ° F-140 ° F (-5°C ... 60°C)
......................................................
.............................................................................
.........................................................
......................................................
....................................................
.............................................

TEMPq
Decreases temperat in
2°F(1°C) increments.
Min. temperature is 
(17°C).
TEMPp
Increases temperat in
2°F(1°C) increments. Max.
temperature i 30°C).
3 4
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the How to Use Basic Functions section of this manual.
SHORT CUT
Sets and activates your
favorite pre-settings
ON/OFF
Turns the unit on or off
MODE
Scrolls through operation
modes as follows:
AUTO gCOOLgDRY g
HEAT
gFAN
FAN SPEED
Selects fan speeds in
the following order:
AUTO g LOW g
MED g HIGH
SLEEP
Saves energy during
sleeping hours
TURBO
Enables  unit to reach
 preset temperatur in
 shortest possible time
TIMER ON
Sets  timer to turn  unit
on (see How to Use 
Basic Functions for
instructions)
TIMER OFF
Sets  timer to turn  unit
off (see How to Use 
Basic Functions for
instructions)
SWING
Starts and stops louver
movement
LED
Turns  indoor unit ,s LED display on and off.
FOLLOW ME
Temperature sensing
and room temperature
display button.
SELF CLEAN
Starts and stops
self clean feature.
NOT SURE WHAT A FUNCTION DOES?
Refer to the  U B F
and How to Use  Advanced Functions
sections of this manual for a detailed
description of how to use your air conditioner.
SPECIAL NOTE
Button designs on your unit may differ
slightly from the example shown.
If the indoor unit does not have a particular
function, pressing that function,s button
on the remote control will have no effect.
When there are wide differences between
Remote control Illustrat and SER'S
MANUAon function description, the
description of SER'S MANUA prevail.
TIPS FOR USING REMOTE CONTROL
The remote control must be used within 8
meters of the unit.
The unit will beep when  remote signal is
received.
Curtains, other material and direct sunlight
can interfere with the infrared signal receiver.
Remove batteries if the remote will be
used  more than 2 months.
Inserting and Replacing Batteries
Your air conditioning unit comes with two AAA
batteries. Put the batteries in the remote control
before use.
1. Slide the back cover from the remote
control downward, exposing the battery
compartment.
2. Insert the batteries, paying attention to match
up the (+) and (-) ends of the batteries with
the symbols inside the battery compartment.
3. Slide the battery cover back into place.
BATTERY NOTES
For optimum product performance:
Do not mix old and new batteries, or
batteries of different types.
Do not leave batteries in the remote control
if you don t plan on using the device for
more than 2 months.
BATTERY DISPOSAL
Do not dispose of batteries as unsorted
municipal waste. Refer to local laws for
proper disposal of batteries.
,
ON/OFF
TEMP
SHORT
CUT
TIMER
ON
TIMER
OFF
MODE
FAN
SLEEP
TRUBO
FRESH
CLEAN LED
FOLLOW
FRESH
he Ionizer/Plasma
Dust Collector (depending
on models) is energized
and will help to remove
pollen and impurities
from the air.
If you are sensitive to light when you go to
sleep, you can press the LED button to turn
off the LED display on the indoor unit. Press
the button again to turn it back on.
Function Buttons
Handling The Remote Control
NOTE:Please do not select
HEAT mode if the machine you
purchased is  cooling only type.
Heat mode is not supported
by the cooling only appliance.

5 6
MODE display
Displays the current
mode, including:
AUTO
COOL
DRY
HEAT
FAN
Transmission Indicator
Lights up when remote sends
signal to indoor unit
ON/OFF display
Appears when the unit is turned on
and disappears when it is turned off
TIMER ON display
Displays when TIMER
ON is set
TIMER OFF display
Displays when TIMER
OFF is set
SLEEP display
Battery display
FRESH display
SILENT display
ECO display
Displays when 
SLEEP function
is activated
FOLLOW ME
display
Indicates that
the FOLLOW ME
function is on
FAN SPEED display
Displays  selected FAN SPEED:
HIGH, MED,
or LOW
This display is blank when
set to AUTO speed or DRY mode.
Temperature/Timer display
Displays the set temperature by default, or  timer setting
when using TIMER ON/OFF functions
Temperature range: 6  - 86°F (17°C - 30°C)
Timer setting range: 0-24 hours
This display is blank when operating in FAN mode.
1. Press the MODE button to select
COOL mode.
2. Set your desired temperature using
the Temp or Temp button.
3. Press the FAN button to select the
fan speed: AUTO, LOW, MED, or
HIGH.
4. Press the ON/OFF button to start the
unit.
In AUTO mode, the unit will automatically
select the COOL, FAN, HEA r DRY mode
based on the set temperature.
1. Press the MODE button to select Auto mode.
2. Set your desired temperature using the
Temp or Temp button.
3. Press the ON/OFFbutton to start the unit.
,
NOTE: FAN SPEED can t be set in Auto mode.
SETTING TEMPERATURE
AUTO operation
The operating temperature range for units is
62-86° F(17-30°C). You can increase or decrease
t set temperature in 2°F(1°C) increments.
COOL operation
1
3
2
1
3
2
4
Not available for this unit
Not available for
this unit
Displayed when 
 feature is
ativated
Low battery
detection
Remote LCD Screen Indicators
How to Use the Basic Functions
ON/OFF
ON/OFF
TEMP
TEMP
SHORT
CUT
SHORT
CUT
TIMER
ON
TIMER
ON
TIMER
OFF
TIMER
OFF
MODE
MODE
FAN
FAN
SLEEP
SLEEP
TRUBO
TRUBO
FRESH
FRESH
CLEAN
CLEAN
LED
LED
FOLLOW
FOLLOW

78
1. Press the MODE button to select DRY
mode.
2. Set your desired temperature using the
Temp or Temp button.
3. Press the ON/OFF button to start the unit.
,
NOTE: FAN SPEED can t be changed in
DRY mode.
1. Press the MODE button to select FAN
mode.
2. Press  FAN button to select the fan
speed: AUTO, LOW, ME r HIGH.
3. Press the ON/OFF button to start the
unit.
NOTE: You c t  temperature in FAN
mode. As a result, your remote contro
CD screen will not display  temperature.
DRY operation (dehumidifying)
FAN operation
1. Press the MODE button to select
HEAT mode.
2. Set your desired temperature using
the Temp or Temp button.
3. Press the FAN button to select the
fan speed: AUTO, LOW, MED, or HIGH.
4. Press the ON/OFF button to start the
unit.
HEAT operation
NOTE: As outdoor tempe
,rature drops, the
performance of your unit s HEAT function
may be affected. In such instances, we
recommend using this air conditioner in
conjunction with other heating appliance.
1
1
2
3
3
2
1
3
2
4
How to Use the Basic Functions How to Use the Basic Functions
ON/OFF
TEMP
SHORT
CUT
TIMER
ON
TIMER
OFF
MODE
FAN
SLEEP
TRUBO
FRESH
CLEAN LED
FOLLOW
ON/OFF
TEMP
SHORT
CUT
TIMER
ON
TIMER
OFF
MODE
FAN
SLEEP
TRUBO
FRESH
CLEAN LED
FOLLOW
ON/OFF
TEMP
SHORT
CUT
TIMER
ON
TIMER
OFF
MODE
FAN
SLEEP
TRUBO
FRESH
CLEAN LED
FOLLOW

910
NOTE: When setting the TIMER ON or
TIMER OFF functions,    incre
 -nute increments with each pres 
  
fter 10 hours and up to 24, it will increase in
1 hour increments. The timer will revert to
zero after 24 hours.
You can turn off either function by
setting its timer to "0.0h".
2. Press the TIMER ON button repeatedly
to set the time  you want the unit to
turn on.
3.  2 seconds, the TIMER ON
function will be activated. The digital
display on your remote control will then
return to the temperature display.
2. Press the TIMER OFF button repeatedly
to set the time  you want the unit to
turn off.
3.  2 seconds, the TIMER OFF
function will be activated. The digital
display on your remote control will then
return to the temperature display.
Example
hours.
: Setting  unit to turn on after 2.5
Example
hours.
: Setting  unit to turn off after 5
2 sec
ON/OFF
MODE
FAN
SHORT
CUT
TIMER ON
TIMER OF
F
TEMP
S
LEEP
1 sec
x5
1
3
2
4
TIMER OFF function
The TIMER OFF function allows you to
set a period of time after which the unit
will automatically turn off, such as when
you wake up.
Note: This number indicates the
amount of time after the current time
that you want the unit to turn on.
For example, if you set TIMER ON for
2 hours, "2.0h" will appear on the
screen, and the unit will turn on after
2 hours.
1. Press the TIMER ON button. By
default, the last time period that you
set and an "h" (indicating hours) will
appear on the display.
Note: This number indicates the
amount of time after the current time
that you want the unit to turn off.
For example, if you set TIMER OFF for
2 hours, "2.0h" will appear on the
screen, and the unit will turn off after
2 hours.
1. Press the TIMER OFF button. By
default, the last time period that you
set and an "h" (indicating hours) will
appear on the display.
2 sec
x10
ON/OFF
MODE
FAN
SHORT
CUT
TIMER ON
TIMER OF
F
TEMP
S
LEEP
1 sec
1
3
2
4
TIMER ON function
The TIMER ON function allows you to set
a period of time after which the unit will
automatically turn on, such as when you
come home from work.
Your air conditioning unit has two
timer-related functions:
TIMER ON- sets the amount of timer after
which the unit will automatically turn on.
TIMER OFF- sets the amount of time after
which the unit will automatically turn off.
TIMER ON TIMER ON
TIMER OFF TIMER OFF
Continue to press
TIMER ON or
TIMER OFF until
 desired time is
reached.
Setting the TIMER function
ON/OFF
TEMP
SHORT
CUT
TIMER
ON
TIMER
OFF
MODE
FAN
SLEEP
TRUBO
FRESH
CLEAN LED
FOLLOW
Timer on

11
Example: Setting the unit to turn on after 6 hours, operate for 2 hours, then turn off
(see the figure below)
Your remote display
Timer is set o turn ON
6 hours from  current time
Timer is set to turn OFF
8 hours from  current time
Current
 M
2PM 3PM 4PM 5PM 6PM 7PM 8PM 9PM
Timer starts Unit turns Unit turns
ON OFF
6 hours later
8 hours later
Timer on
Timer off
12
Setting both TIMER ON and TIMER OFF at the same time
Keep in mind that the time periods you set for both functions refer to hours after the
current time.                
                
Do the following:
ON/OFF
ON/OFF
MODE
MODE
SHORT
SHORT
CUT
CUT
TIMER ON
TIMER ON
TEMP
TEMP
3
3
sec
sec
4
8
3
7
X12
X16
2
6
1
5
TIMER ON TIMER ON
TIMER OFF TIMER OFF

Used to restore the current settings or resume
previous settings.
he first time connecting to the power, if  push
the SHORTCUT button, the unit will operate on
AUTO m °F(), and fan speed is Auto.
  ush this button when  remote control is on,
the system will automatically revert back to the previous
 ncluding operating mode, setting
temperature, fan speed  and sleep feature
(if activated).
If push more than 2 seconds, the system will
automatically restore the current operation settings,
including operating mode, setting temperature, fan
speed level,and sleep feature (if activated).
13
The FOLLOW ME function enables the
remote control to measure the temper-
ature at its current location. When using
 AUTO, COOL, or HEAT functions,
measuring ambient temperature from
the remote control (instead of from the
indoor unit itself) will enable the air
conditioner to optimize the temperature
around you and ensure maximum comfort. 1.
Press  FOLLOW ME button to activate 
function. The remote control will sen 
temperature signal to the indoor unit
every three minutes.
2. Press  FOLLOW ME button again to
turn off this function.
The TURBO function makes the unit work
extra hard to reach your present temperature
in the shortest amount of time possible.
When you press the TURBO button in
COOL mode, the unit will blow cool air
with  strongest wind setting to jump-start
the cooling process.
When you press the TURBO button in
HEAT mode, for units with lectric heat
lements, the lectric eater will activate
and jump-start the heating process.
Airborne bacteria can grow in the
moisture that condenses around heat
exchangers in the unit. With regular use,
most of this moisture is evaporated from
the unit. By pressing the SELF CLEAN
button, your unit will clean itself automa-
tically. The cleaning cycle takes 30
minutes, after which the unit will turn off
automatically. Pressing the SELF CLEAN
button mid-cycle will cancel the operation
and turn off the unit.
You can use SELF CLEAN as often as
you like.
Note: You can only activate this function
in COOL or DRY mode.
FOLLOW ME function SHORTCUT function
SWING function
SELF CLEAN function
TURBO function
SLEEP Function
The SLEEP function is used to decrease
energy use while you sleep (and don t need
the same temperature settings to stay
comfortable). This function can only be
activated via remote control.
Note: The SLEEP function is not available
in FAN or DRY mode.
,
Swing Button
Swing Button
Used to stop or start horizontal louver movement
or set the desired up/down air flow direction. The
louver changes 6 degree in angle for each press.
If push more than 2 seconds, the louver
will swing up and down automatically.
Used to stop or start vertical louver movement
and set the desired left/right air flow direction.
The vertical louver changes 6 degree in angle
for each press. If push more than 2 seconds,
the vertical louver auto swing feature is activated.
o to Use the Advanced Functions o to Use the Advanced Functions
ON/OFF
ON/OFF
TEMP
TEMP
SHORT
CUT
SHORT
CUT
TIMER
ON
TIMER
ON
TIMER
OFF
TIMER
OFF
MODE
MODE
FAN
FAN
SLEEP
SLEEP
TRUBO
TRUBO
CLEAN
CLEAN
LED
LED
FOLLOW
FOLLOW
FRESH
FRESH
14