Olympus FE-290 User manual

DIGITAL CAMERA
Instruction
Manual
Getting to know your
camera better
Quick Start Guide
Get started using your
camera right away.
Button operations
Menu operations
Printing pictures
Using OLYMPUS Master
(Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please
read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual
in a safe place for future reference.
(We recommend that you take test shots to get accustomed to your camera before taking important
photographs.
(In the interest of continually improving products, Olympus reserves the right to update or modify
information contained in this manual.
(The screen and camera illustrations shown in this manual were produced during the development stages
and may differ from the actual product.
Appendix
FE-290/X-825
d4347_e_0000_7.book Page 1 Tuesday, July 17, 2007 11:23 AM

2 EN
Contents
Test out the functions of the camera
buttons by following along with the
illustrations.
Learn how to print pictures you have
taken.
Learn how to transfer and save
pictures to a computer.
Find out more about camera
operations and how to take better
pictures.
Read about convenient functions and
safety precautions to use your camera
more effectively.
Learn about the menus that control
the functions and settings for basic
operation.
Button operations
Menu operations
Printing pictures
Getting to know your camera
better
Appendix
P. 11
P. 16
P. 27
P. 40
P. 48
Using OLYMPUS Master P. 33
Quick Start Guide P. 3
d4347_e_0000_7.book Page 2 Tuesday, July 17, 2007 11:23 AM

Quick Start Guide
EN 3
Gather these items (box contents)
(Pull the strap tight so that it does not come loose.
Digital Camera Strap Lithium Ion Battery
(LI-42B)
USB Cable AV Cable OLYMPUS Master 2
CD-ROM
Items not shown: Instruction Manual (this manual), warranty card. Contents may vary
depending on purchase location.
Battery Charger
(LI-40C)
Attach the strap
Quick Start Guide
d4347_e_0000_7.book Page 3 Tuesday, July 17, 2007 11:23 AM

Quick Start Guide
4 EN
Prepare the camera
a. Charge the battery.
(Battery comes partially charged.
b. Insert the battery and the xD-Picture Card (optional) into the
camera.
2
1
3
Red light on: Charging
Light off: Charging complete
(Charging time: Approx. 5 hours)
AC Wall
Outlet
Power Cable
Battery
Charger
Lithium Ion Battery
W
Charging Indicator
1
2
d4347_e_0000_7.book Page 4 Tuesday, July 17, 2007 11:23 AM

EN 5
Prepare the camera
Quick Start Guide
(With this camera, you can take pictures without inserting the optional xD-
Picture Card™ (hereinafter referred to as “the card”). If you take pictures
without inserting the card, the pictures will be stored in the internal memory.
For details on the card, please refer to “The card” (P. 50).
3
(Insert the battery by putting in
the marked side first, with
the Bmarks toward the end of
the camera, the Cmarks
toward the center of the
camera.
If you insert the battery incorrectly,
you may not be able to remove it. Do
not use force. Contact authorized
distributors/service centers.
Damage to the battery exterior
(scratches, etc.) may produce heat
or an explosion.
Battery lock knob
(To remove the battery, press the battery lock knob
in the direction of the arrow.
5
6
4
Notch Contact area
(Orient the card, and insert the card straight
in. Insert the card until it clicks into place.
(To remove the card, push the card all the
way in, release slowly, grasp the card and
remove it.
d4347_e_0000_7.book Page 5 Tuesday, July 17, 2007 11:23 AM

Quick Start Guide
6 EN
Turn the camera on
This explains how to turn on the camera in shooting mode.
a. Set the mode dial to h.
Still picture shooting modes
b. Press the obutton.
(To turn off the camera, press the obutton once again.
hThe camera determines the optimum settings for shooting pictures.
PThe camera automatically sets the optimum aperture value and shutter speed.
hThis function reduces the blur incurred by a moving subject, or camera shake when
taking pictures.
BSuitable for taking pictures of people.
ESuitable for taking pictures of a landscape.
fSelect from 11 available scene modes, according to the shooting conditions.
RUse the shooting guide displayed on the screen to shoot pictures according to the
situation.
When shooting movies
When shooting still pictures
o
obutton
MENU
TIME
TIME
DMY
----
----
.--.-- --:--
.--.-- --:--
CANCEL
Y/M/
Y / M /
D
(This screen is
displayed if the date
and time are not set.
O
N
Y
X
Hint
The directions of the arrow pad is indicated with ONXY in the
supplied instruction manual.
d4347_e_0000_7.book Page 6 Tuesday, July 17, 2007 11:23 AM

Quick Start Guide
EN 7
Set the date and time
a. Press the OF/<and NYbuttons to select [Y].
• The first two digits of the year are fixed.
b. Press the Y#button.
c. Press the OF/<and NYbuttons to
select [M].
About the date and time setting screen
MENU
TIME
TIME
DMY
----
----
.--.-- --:--
.--.-- --:--
CANCEL
Y/M/
Y / M /
D
Y-M-D
Cancels the setting
Hour
Date formats (Y-M-D, M-D-Y, D-M-Y)
Minute
OF/<button
NYbutton
MENU
2007
2007
.--.-- --:--
.--.-- --:--
TIME
TIME
DMY
CANCEL
Y/M/
Y / M /
D
Y#button
MENU
2007
2007
. 12
12
.-- --:--
.-- --:--
TIME
TIME
DMY
CANCEL
Y/M/
Y / M /
D
d4347_e_0000_7.book Page 7 Tuesday, July 17, 2007 11:23 AM

8 EN
Set the date and time
Quick Start Guide
d. Press the Y#button.
e. Press the OF/<and NYbuttons to
select [D].
f. Press the Y#button.
g. Press the OF/<and NYbuttons to
select the hours and minutes.
• The time is displayed in the 24-hour format.
h. Press the Y#button.
i. Press the OF/<and NYbuttons to
select [Y/M/D].
j. After all settings have been set, press H.
• For a more accurate setting, press Hwhen the time signal hits 00 seconds.
MENU
2007
2007
. 12
12
. 10
10
--:--
--:--
TIME
TIME
DMY
CANCEL
Y/M/
Y / M /
D
MENU
OK
2007
2007
. 12
12
. 10
10
12
12
: 30
30
TIME
TIME
DMY
CANCEL
Y/M/
Y / M /
D
SET
MENU
OK
2007
2007
. 12
12
. 10
10
12
12
: 30
30
SET
TIME
TIME
DMY
Y/M/
Y / M /
D
CANCEL
Hbutton HQ
HQ
3072
3072
×2304
2304
[IN
IN
]
44
[ ]
d4347_e_0000_7.book Page 8 Tuesday, July 17, 2007 11:23 AM

Quick Start Guide
EN 9
Take a picture
a. Hold the camera.
c. Shoot.
Horizontal grip Vertical grip
b. Focus.
HQ
HQ
3072
3072
×
2304
2304
[IN
IN
]
44
[ ]
1/1000
1/1000
F2.7
F2.7
Shutter Button
(Press Halfway)
When the focus and exposure are
locked, the green lamp lights up, and
the shutter speed and aperture value
are displayed.
Place this mark over
your subject.
The number of pictures
that can be taken is
displayed.
HQ
HQ
3072
3072
×2304
2304
[IN
IN
]
44
[ ]
1/1000
1/1000
F2.7
F2.7
Shutter Button
(Press
Completely)
The card access lamp blinks.
d4347_e_0000_7.book Page 9 Tuesday, July 17, 2007 11:23 AM

Quick Start Guide
10 EN
Review your pictures
a. Press the qbutton.
a. Press the X&and Y#buttons to display the picture you want
to erase.
b. Press the /Sbutton.
c. Press the OF/<button, select [YES], and press H.
Arrow pad
Displays the next image
Displays the previous image
qbutton
’07
07
. 12
12
. 10
10
12
12
:
40
40
ISO 400
ISO 400
1
100
100
-0001
0001
0.0
0.0
3072
3072
×2304
2304
HQ
HQ
1/1000
1/1000
F2.7
F2.7
Erase pictures
/Sbutton
OK
MENU
[IN]
YES
NO
[IN]
SET
BACK
ERASE
OF/<button
Hbutton
OK
MENU
YES
NO
[IN]
SET
BACK
ERASE
d4347_e_0000_7.book Page 10 Tuesday, July 17, 2007 11:23 AM

Button operations
EN 11
Button operations
Shooting still pictures
Set the mode dial to a setting other than n, and lightly press the shutter button (halfway).
The green lamp lights when the focus and exposure are locked (focus lock), and the shutter
speed and aperture value are displayed (only when the mode dial is set to h, P, h).
Now press the shutter button all the way (completely) to shoot a picture.
Locking the focus and then composing the shot (focus
lock)
Compose your picture with the focus locked, and then
completely press the shutter button to shoot a picture.
• When the green lamp blinks, the focus is not adjusted
properly. Try locking the focus again.
Recording movies
Set the mode dial to n, and lightly press the shutter button to lock the focus, and then press
the shutter button completely to start recording. Press the shutter button again to stop
recording.
Shooting mode is selected.
This function is used to set the camera to turn on in shooting mode when Kis pressed with
the camera off.
g“K/qTurning on the camera with the Kor qbutton” (P. 25)
obutton Turning the camera on and off
Power on: Camera turns on in shooting mode.
• Lens extends
• Monitor turns on
Shutter button Shooting pictures/movies
Kbutton (Shooting) Selecting shooting mode/Turning the camera on
3072
3072
×2304
2304
HQ
HQ
44
3
Shooting mode
12
4
bc
5
8
9
0
a
6
7
Self-timer
Flash mode
Macro mode
d
1
2
HQ
HQ
3072
3072
×2304
2304
[IN
IN
]
44
[ ]
1/1000
1/1000
F2.7
F2.7
Green lamp
3
d4347_e_0000_7.book Page 11 Tuesday, July 17, 2007 11:23 AM

Button operations
12 EN
The last picture taken is displayed.
• Press the arrow pad to view other pictures.
• Use the zoom lever to switch between close-up playback and index display.
•PressHto delete the information display shown for 3 seconds during single-frame
playback.
This function is used to set the camera to turn on in playback mode when qis pressed with
the camera off.
g“K/qTurning on the camera with the Kor qbutton” (P. 25)
gMovie playback “MOVIE PLAY Playing back movies” (P. 21)
Set the mode dial to the desired shooting mode.
•PressHto delete the mode information display shown for 3 seconds when the mode dial
is set to modes other than for R.
The camera determines the optimum settings for shooting pictures. [CAMERA MENU]
settings such as ISO sensitivity cannot be changed.
The camera automatically sets the optimum aperture value and shutter speed for the
brightness of the subject. [CAMERA MENU] settings such as ISO sensitivity can be
changed.
This function reduces the blur incurred by a moving subject, or camera shake when taking
pictures.
Use PORTRAIT and LANDSCAPE to shoot pictures with the optimal settings.
Select from 11 available scene modes, according to the shooting conditions.
Press Hto set.
• The scene selection screen displays sample images and
the shooting mode to best suit the situation.
• To switch to a different scene mode after a scene mode has
been selected, press mto select [SCENE] from the top
menu and display the scene selection screen.
• By switching to another scene, most settings will be
changed to the default settings of each scene.
qbutton (Playback) Selecting playback mode/Turning the camera on
Mode dial Switching shooting modes
hShooting pictures with automatic settings
PSet the optimum aperture value and shutter speed
hShooting pictures using digital image stabilization
BEShooting pictures according to the situation
fShooting pictures by selecting a scene mode according to the
situation
MNIGHT+PORTRAIT /jSPORT /NINDOOR /WCANDLE
/RSELF PORTRAIT /SSUNSET /XFIREWORKS /PBEHIND GLASS
/VCUISINE /dDOCUMENTS /iAUCTION
4
5
OK
MENU
1 NIGHT+PORTRAIT
SETBACK
d4347_e_0000_7.book Page 12 Tuesday, July 17, 2007 11:23 AM

Button operations
EN 13
Follow the shooting guide displayed on the screen to set the
target items.
•Pressmto display the shooting guide again.
• To change the setting without using the shooting guide, set
the shooting mode to another one.
• The content set using the shooting guide will change to the
default setting by pressing mor changing the mode
using the mode dial.
Audio is recorded with the movie.
• During audio recording, only the digital zoom can be used. To record the movie with the
optical zoom, set [R] (movie) to [OFF].
g“R(movie) Recording movies with or without sound” (P. 19)
Use the arrow pad to select scenes, items on the menus, and to play back pictures.
This button is used to confirm your selection.
Shooting mode: Changing picture brightness
Press OF/<in shooting mode, choose the preferred
brightness with XY, and press H.
• Adjustable from -2.0 EV to +2.0 EV
Playback mode: Printing pictures
Display a picture to print out in playback mode, connect the camera to the printer, and then
press OF/<to print the picture.
g“Direct printing (PictBridge)” (P. 27)
RFollow the shooting guide for setting
nRecording movies
Arrow pad (ONXY)
Hbutton
OF/<button Changing picture brightness (Exposure compensation)/
Printing pictures
OK
4
Blurring background.
5
Shooting into backlight.
Brightening subject.
Adjusting area in focus.
Shooting subject in motion.
3
2
1
SHOOTING GUIDE 1/3
SET
00:36
00:36
00:36
This lights red during movie recording.
The remaining recording time is displayed. When
the remaining recording time reaches 0, recording
stops.
6
7
8
0.0
0.0
+0.3
0.3
+1.0
1.0
+0.7
0.7
F
d4347_e_0000_7.book Page 13 Tuesday, July 17, 2007 11:23 AM

Button operations
14 EN
Press X&in shooting mode to select the macro mode. Press Hfor setting.
Press NYin shooting mode to select on or off for the self-timer.
Press Hfor setting.
• After setting the self-timer, press the shutter button completely. Then, the self-timer lamp
lights for approximately 10 seconds, blinks for approximately 2 seconds, and the shutter is
released.
• To cancel the self-timer, press NY.
• Self-timer shooting is automatically canceled after one shot.
Press Y#in shooting mode to select the flash mode.
Press Hfor setting.
Displays the top menu.
The monitor lights brighter when is pressed in shooting mode. If there is no operation for
10 seconds, it dims back to the original brightness.
• When [BRIGHT] is selected in [], the monitor brightness does not change.
In playback mode, select the picture you want to erase, and press S.
• Once erased, pictures cannot be restored. Check each picture before erasing to avoid
accidentally erasing pictures you want to keep.
g“0Protecting pictures” (P. 21)
X&button Shooting pictures close to the subject (Macro mode)
OFF Macro off Cancels macro mode.
&Macro on This mode lets you shoot from as close as 20 cm/7.9 in. (when
the zoom is set for the zoom-out angle) and as close as 35 cm/
13.8 in. (when the zoom is set for the zoom-in angle) to your
subject.
%Super macro This mode lets you shoot from as close as 5 cm/2.0 in. to your
subject.
The zoom position is fixed automatically and cannot be changed.
NYbutton Self-timer shooting
OFF Self-timer off Cancel the self-timer.
YSelf-timer on Set the self-timer.
Y#button Flash shooting
AUTO Flash auto The flash fires automatically in low light or backlight conditions.
!Red-eye This emits pre-flashes for red-eye reduction.
#Fill-in The flash fires regardless of the available light.
$Flash off The flash does not fire.
mbutton Displaying the top menu
/Sbutton Increasing the brightness of the monitor (Backlight boost)/
Erasing pictures
Increasing the brightness of the monitor (Backlight boost)
SErasing pictures
9
0
a
b
c
d4347_e_0000_7.book Page 14 Tuesday, July 17, 2007 11:23 AM

Button operations
EN 15
Shooting mode: Zooming in on your subject
Optical zoom: 4×
Digital zoom: 4× (optical zoom × digital zoom: Max. 16×)
Playback mode: Switching the picture display
Zoom lever Zooming while shooting/Close-up playback
d
Zoom out:
Turn the zoom
lever to the W-
side.
Zoom in:
Turn the zoom
lever to the T-
side.
The white area is the optical zoom area. The red area is the digital
zoom area. When the slider enters the red area, the digital zoom
activates and the image is further enlarged.
Zoom bar
3072
3072
×
2304
2304
HQ
HQ
44
3072
3072
×
2304
2304
HQ
HQ
44
21 3
4
8
79
56
’07
07
. 12
12
. 10
10
12
12
:
30
30
ISO 400
ISO 400
4
100
100
-0004
0004
HQ
HQ
0.0
0.0
3072
3072
×2304
2304
1/1000
1/1000
F2.7
F2.7
21
3 4
Close-up playback
• Turn and hold the zoom lever to
the T-side to incrementally zoom
in (up to 10 times the original
size), and to the W-side to zoom
out.
• Press the arrow pad during close-
up playback to scroll the picture in
the indicated direction.
• When returning to the single-
frame playback, press H.
Index display
• Use the arrow pad to select a
picture for playback, and
press Hto play back the
single-frame of the picture
selected.
Single-frame playback
• Use the arrow pad to browse pictures.
W
TW
W
T
W
T
W
T
T
d4347_e_0000_7.book Page 15 Tuesday, July 17, 2007 11:23 AM

Menu operations
16 EN
Menu operations
Press mto display the top menu on the monitor.
• The contents displayed on the top menu differ according to the mode.
• Select [CAMERA MENU], [PLAYBACK MENU] or [SETUP] and press H. The screen for
selecting the menu item is then displayed.
• When the mode dial is set to Rand the settings are made by following the shooting
guide, press mto display the shooting guide screen.
During menu operations, the buttons and their respective functions are displayed at the
bottom of the screen. Follow these guides to navigate the menus.
About the menus
Operation guide
mbutton
H
Arrow pad (ONXY)
Kbutton (Shooting mode)
qbutton (Playback mode)
OK
MENU
RESET
SILENT
MODE
SET
EXIT
SETUP
RESET
SILENT
MODE
SETUPSETUP
SCENE
SCENE
IMAGE
IMAGE
QUALITY
QUALITY
IMAGE
QUALITY
CAMERA
CAMERA
MENU
MENU
CAMERA
MENU
OK
MENU
1
3
2
MEMORY FORMAT
NO
PIXEL MAPPING
ENGLISH
BACKUP
SETUP
SET
BACK
Top menu
(Still picture shooting mode)
SETUP menu items
OK
MENU
RESET
SILENT
MODE
SET
EXIT
SETUP
RESET
SILENT
MODE
SETUPSETUP
SCENE
SCENE
IMAGE
IMAGE
QUALITY
QUALITY
IMAGE
QUALITY
CAMERA
CAMERA
MENU
MENU
CAMERA
MENU
Operation
guide m
button H
Arrow pad
(ONXY)
: Moves back one menu.
: Exits the menu.
: Press the arrow pad (ONXY) to select an
item.
: Sets the selected item.
MENU
BACK
MENU
EXIT
OK
SET
d4347_e_0000_7.book Page 16 Tuesday, July 17, 2007 11:23 AM

Menu operations
EN 17
This explains how to use the menus with the [8] (warning sound) setting as an example.
1Set the mode dial to a setting other than R.
2Press mto display the top menu. Press Y
to select [SETUP], and press H.
•[8] is on a menu in [SETUP].
3Press ON to select [8], and press H.
• Unavailable settings cannot be selected.
• Press Xon this screen to move the cursor to the page
display. Press ON to change the page. To return to the
item selection screen, press Yor H.
4Press ON to select [OFF], [LOW] or [HIGH],
and press H.
• The menu item is set and the previous menu is displayed.
Press mrepeatedly to exit the menu.
• To cancel any changes and continue operating the menus,
press mwithout pressing H.
Using the menus
OK
MENU
RESET
SILENT
MODE
SET
EXIT
SETUP
RESET
SILENT
MODE
SETUP
IMAGE
IMAGE
QUALITY
QUALITY
SETUP
CAMERA
CAMERA
MENU
MENU
CAMERA
MENU
IMAGE
QUALITY
SCENE
SCENE
OK
MENU
1
3
2
MEMORY FORMAT
NO
PIXEL MAPPING
ENGLISH
BACKUP
SETUP
SET
BACK
OK
MENU
1
2
3
SETUP
BACK
SET
LOW
LOW
NORMAL
LOW
BEEP
SHUTTER SOUND
VOLUME
The selected item is displayed
in a different color.
Page display:
This mark is displayed when there are more
menu items on the next page.
OK
MENU
1
2
3
BEEP
SHUTTER SOUND
VOLUME
SETUP
SET
BACK
LOW
HIGH
OFF
d4347_e_0000_7.book Page 17 Tuesday, July 17, 2007 11:23 AM

Menu operations
18 EN
• Some functions are not available according to the selected mode.
g“Functions available in shooting modes and scenes” (P. 47)
g“SETUP menus” (P. 24)
• The factory default settings are displayed in gray ( ).
Still picture image quality and their applications
Movie image quality
Shooting mode menu K
IMAGE QUALITY Changing the image quality
Image quality/Image size Compression Application
SHQ 3072 × 2304 Low
compression
• This is useful for printing large images
on full-size paper.
• This is useful for performing computer
image processing, such as contrast
adjustment and red-eye correction.
HQ 3072 × 2304 Standard
compression
SQ1 2048 × 1536 Standard
compression
• This is useful for A4 (11.7×8.5 in.)/
postcard-size prints.
• This is useful for computer editing such
as rotating or adding text to a picture.
SQ2 640 × 480 Standard
compression
• This is useful for sending as e-mail
attachments.
16:9 1920 × 1080 Standard
compression
• This is useful for expressing the
broadness of a subject such as
landscapes and for viewing pictures on
a wide-screen television.
• [PANORAMA] cannot be set.
Image quality/Image size
SHQ 640 × 480
HQ 320 × 240
2
* An Olympus xD-Picture Card
is required.
4
3
1
5
4CAMERA MENU
OK
MENU
RESET
SILENT
MODE
SET
EXIT
SETUP
RESET
SILENT
MODE
SETUPSETUP
SCENE
SCENE
IMAGE
IMAGE
QUALITY
QUALITY
IMAGE
QUALITY
CAMERA
CAMERA
MENU
MENU
CAMERA
MENU
ISO
R(still picture)
R(movie)
PANORAMA*
1
d4347_e_0000_7.book Page 18 Tuesday, July 17, 2007 11:23 AM

Menu operations
EN 19
Functions for returning the settings to the original when the reset function is
executed
The scene selection screen displays sample images and the shooting mode to best suit the
situation. This can be set only when the mode dial is set to f.
• By switching to another scene, most settings will be changed to the default settings of each
scene.
g“fShooting pictures by selecting a scene mode according to the situation” (P. 12)
RESET Changing the shooting functions back to default settings
NO /YES Restore shooting functions back to default settings.
Function Factory default setting Ref. Page
#AUTO P. 14
&OFF P. 14
F0.0 P. 13
YOFF P. 14
IMAGE QUALITY HQ P. 18
fMNIGHT+PORTRAIT P. 12
ISO AUTO P. 19
R(still picture) OFF P. 19
R(movie) ON P. 19
f(Scene) Shooting pictures by selecting a scene according to the situation
CAMERA MENU
ISO .................................................................................................. Changing the ISO sensitivity
AUTO Sensitivity is automatically adjusted according to the conditions of the
subject.
64/100/200/400/
800
A low value lowers the sensitivity for daylight shooting of clear, sharp
pictures. The higher the value, the better the camera’s light sensitivity
and ability to shoot with a fast shutter speed and in low light conditions.
However, high sensitivity introduces noise into the resulting picture,
which may give it a grainy appearance.
R(still picture) ...............................................................Recording sound with still pictures
OFF /ON When activated [ON], the camera will record about 4 seconds of
audio after the picture is taken.
When recording, aim the camera microphone at the source of the
sound you want to record.
R(movie) ................................................................ Recording movies with or without sound
OFF /ON When [ON] (sound is recorded) is selected, the optical zoom
cannot be used during movie recording. Only the digital zoom can
be used.
2
3
4
d4347_e_0000_7.book Page 19 Tuesday, July 17, 2007 11:23 AM

Menu operations
20 EN
Panorama shooting lets you create a panoramic picture, using the OLYMPUS Master
software on the provided CD-ROM. An Olympus xD-Picture Card is required for panorama
shooting.
Use the arrow pad to specify at which edge you want to connect the pictures; and then
compose your shots so that the edges of the pictures overlap. The part of the previous
picture where it will be joined to the next picture does not remain in the frame. You have to
remember what the part in the frame looked like and take the next picture so it overlaps.
•PressHto exit.
• Panorama shooting is possible for up to 10 pictures. The warning mark (g) is displayed
after 10 pictures have been taken.
g“SETUP menus” (P. 24)
g“SILENT MODE Muting operational sounds” (P. 20)
• The factory default settings are displayed in gray ( ).
PANORAMA............................................................................... Creating a panoramic picture
SILENT MODE Muting operational sounds
OFF /ON This function allows you to mute operational sounds during
shooting and playback (e.g. warning beeps, shutter sounds, etc.).
Playback mode menu q
Connects pictures from left to right Connects pictures from bottom to top
Y: The next picture is
connected at the right
edge.
X: The next picture is
connected at the left
edge.
O: The next picture is
connected at the top.
N: The next picture is
connected at the
bottom.
5
OK
MENU
ERASE
ERASE
SETUP
SETUP
MOVIE
MOVIE
PLAY
PLAY
PLAYBACK
PLAYBACK
MENU
MENU
PRINT
PRINT
ORDER
ORDER
SILENT
SILENT
MODE
MODE
ERASE
SETUP
SILENT
MODE
SET
EXIT
RESIZE
RESIZE
MY
MY
FAVORITE
FAVORITE
OK
MENU
RESIZE
RESIZE
ERASE
ERASE
SETUP
SETUP
PRINT
PRINT
ORDER
ORDER
SILENT
SILENT
MODE
MODE
ERASE
SETUP
PRINT
ORDER
SILENT
MODE
SET
EXIT
RESIZE
MY
MY
FAVORITE
FAVORITE
SLIDE-
SLIDE-
SHOW
SHOW
PLAYBACK
PLAYBACK
MENU
MENU
5
When a still picture is selected When a movie is selected
6
7*
3
6
* A card is required.
41 3 2
d4347_e_0000_7.book Page 20 Tuesday, July 17, 2007 11:23 AM