Omega 32105B Instructions for use
1
Read this manual and follow all the Safety Rules and Operating Instructions before using this product.
SFA Companies
Operating Instructions & Parts Manual
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
!
!WARNING
To avoid crushing and related injuries:
NEVER work on, under or around a
load supported only by a hydraulic jack.
ALWAYS use a pair of adequately rated
jack stands.
Pin Style Jack Stands
Model
32105B
32107B
Capacity per pair
10 Ton
10 Ton
Models 32105B & 32107B
2
SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics
and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use
and repair of this product may require special skills and knowledge. Instructions and safety information shall be read
to and discussed with the operator in the operator's native language, making sure that the operator comprehends
their contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this
device, remove from service immediately.
Inspect before each use. Do not use if abnormal conditions such as cracked welds, damaged, loose or missing
parts are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall
be removed from service until repaired. If the equipment has been or is suspected to have been subjected to an
abnormal load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact
distributor or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be
made by an authorized repair facility. Labels and Operator's Manuals are available from the manufacturer.
PRODUCT DESCRIPTION
Omega Heavy Duty Jack Stands are designed to support rated capacity, partial vehicle loads consisting of one end
of a vehicle. Use as a matched pair to support one end of a vehicle only.
SPECIFICATIONS
Model Capacity (per pair) Base Size Min. Height Max. Height
32105B 10 Ton 16-1/8" x 15-5/8” 18-5/8” 31-1/8”
32107B 16-1/8" x 16-1/8” 27-7/8” 47-3/8”
Figure 1 - Models 32105B & 32107B Components
Height
Adjustment
Holes
Saddle
Extension Tube
Collar
Base Section
Roll Pin
Extension Tube
Support Bar
Lanyard
Support Bar Holder
3
PREPARATION
Assembly (ref. Figs. 1 & 2)
1. Make sure all parts are present.Insert extension tube
to the base.
2. Insert roll pin into the bottom hole of the extension
tube to prevent inadvertent removal of the extension
tube.
Before Use
1. Read this manual completely and familiarize yourself
thoroughly with the product and the hazards
associated with its improper use before using the
product.
2. Verify that the product and the application are
compatible.
3. Inspect jack stands before each use. Do not use if
there are bent, broken or cracked components noted (including labels). Ensure that all parts move freely.
4. Consult the vehicle owners or service manual for location of proper lift and support points.
OPERATION
WARNING: Support areas of vehicle specied by vehicle manufacturer. Use ONLY on vehicles whose support
points are compatible with saddle of jack stand. Incompatibility may result in structural damage to vehicle and/
or jack stand.
1. Adjust saddle height by pulling up the extension tube, then insert the tube support bar through the hole on
extension tube.
2. Ensure that support bar is secured before loading. Insert support bar into the extension tube far enough to create
equal distance of bar extending from the extension tube on both sides.
3.
Carefully position jack stands so that load is centered
on stand’s saddle.
4. Slowly lower the vehicle onto the stands.
5. Check to ensure vehicle is secured before working on, around or under. Use wheel chocks on all unlifted wheels
in both directions to prevent inadvertent movement.
To lower load
WARNING: Clear all tools and personnel before lowering load.
1. With suitable jack, raise vehicle clear of stands.
2. Carefully release support bar and allow extension tube to glide down to lowest position.
3. Carefully remove stands, then carefully lower
vehicle with lift device.
MAINTENANCE
Periodically inspect each stand. Ensure all parts move freely. Do not apply oil or grease to any portion of this product.
If rust appears, sand affected area and cover with suitable utility paint.
Storage
Store stands in upright position and in a clean, dry area.
• Study, understand, and follow all instructions
before operating this device.
• Do not exceed rated capacity.
• Use only on hard, level surface.
• Center load on saddle.
• Use as a matched pair only.
• Stands are not to be used to simultaneously
support both ends of a vehicle.
• No alteration shall be made to this device.
• Failure to heed these markings may result in
personal injury and/or property damage.
WARNING
!
!
!
4
REPLACEMENT PARTS
Individual replacement parts are not available for this product. Jack stands are sold as a matched pair.
ONE YEAR LIMITED WARRANTY
For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its
option, without charge, any of its products, which fails due to a defect in material or workmanship under normal
usage. This limited warranty is a consumer's exclusive remedy.
Exceptwheresuchlimitationsandexclusionsarespecificallyprohibitedbyapplicablelaw,(1)
THE CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF
DEFECTIVE PRODUCTS AS DESCRIBED ABOVE. (2) SFA COMPANIES SHALL NOT BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER. (3) ANY IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO ONE YEAR, OTHERWISE THE
REPAIR, REPLACEMENT OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE
EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED. (4) ANY MODIFICATION, ALTERATION, ABUSE, UNAUTHORIZED SERVICE OR
ORNAMENTAL DESIGN VOIDS THIS WARRANTY AND IS NOT COVERED BY THIS WARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not
apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
abovelimitationorexclusionmaynotapplytoyou.Thiswarrantygivesyouspecificlegalrights,andyoumayalso
have other rights, which vary from state to state.
Choose reliable garage accessories offered on our website.
This manual suits for next models
2
Table of contents
