OMP M7435 User manual

Cantilever LED & LCD Wall Mount
7435 40kg
FOR LCD/LED 40"– 55"
VESA Compatible
100/200/300/
400/400x600
7436 40kg
FOR LCD/LED 42"– 70"
VESA Compatible
100/200/300/400/
400x600/400x800

4x washer (I) 4x big spa
1x allen key
cer (K)
AA BB
(O)
4x mounting screws
8x50mm (L)
4x concrete anchor (M)
4x D8 washer (N)
4x small spacer (J)

1. Mounting the Wall Plate
1-1 For wood stud mounting
1-2 For solid brick and concrete wall mounting
NL
N
ML

BB
A–H
I
J or K
2. Installing Adapter brackets 3. Attaching brackets to arm assembly
4. Levelling and adjusting the display
The front of the wall plate allows level adjustment after being mounted to the wall.
Adjust the Television and wall mount to desired position, then tighten bolts.
2-1 For Flat back Screens
2-2 For Recessed back Screens
A-H
I
choose washer hole
that best matches
screw diameter
BB
BB
AA
A–H
I
J or K (Optional)
A-H
J
I
Note: To access A/V inputs you may require the use of the spacers provided (J or K). Note: Arm assembly is partially disassembled for illustrative purposes only. Do not disassemble.
1. Hook adapter bracket arms onto arm assembly.
2. Tighten adapter bracket arm screws for secure fit to arm assembly.
KJ
K
I
A-H
I
choose washer hole
that best matches
screw diameter
A-H

5. Stowing the display for a slimmer mounting profile
To position the display against the wall, grasp the side edges of the display. Swivel and pull the display
into the central position. Finally, push the display straight back towards the wall.
Locking knob