1. Constitution of the Radio Frequency Keyless Entry
System with Door Lock Controller for vehicle
The radio frequency keyless entry is a system that it controls locking and unlocking the door by
wireless remote controller. This system consists of two components. The TRANSMITTER is a device that
transmits the signal when the button is pressed. The transmission signal consists of several synchronous
codes, unique identification code, and security code and function code. The RECEIVER is fixed inside the
vehicle. It works intermittently to prevent the battery exhaustion. When the receiver detects the
synchronous code, it runs continuously to receive the signals completely. After receiving the signal, the
receiver decides which operation will be performed. The user can select the following operations by
pressing the button of the remote transmitter.
OPERATION ACTION
LOCK Lock the door
UNLOCK unlock the door (the driver side first, then all doors)
PANIC The horn is beeped, and the headlight and flasher are blinked
SLIDE DOOR LEFT Open or close the left slide door.
SLIDE DOOR RIGHT Open or close the right slide door.
This receiver also controls wired operation. It is available to control the door lock status by using the
silicon switch or the remote door control switch (both driver’s and passenger’s side).
【TRANSMITTER Assy】
UNLOCK button
SLIDE DOOR LEFT
button
LOCK buttonLOCK button LED PANIC button
SLIDE DOOR RIGHT
button
Transmitter
f =313.85MHz
-1-
-