Onida ON-1204CR User manual

The Onida ON-1204CR LED Clock Radio
Control locations
POWER SUPPLY
If unplugged, plug the power cord into an AC outlet. A blinking signal will appear indicating the time.
If the unit was on battery support, the time will be correct, otherwise it will default to 12:00
midnight.
RADIO OPERATIONS
1. Slide the Function switch to the ON position and rotate the Volume control to switch on the
radio.
2. Adjust the Volume Control to the desired listening level.
3. Set the Band Selector to FM.
4. Select a radio station with the Tuning Control.
87.9 FM
Praise (Seventh Day Adventist
101.1 FM
Radio ICCI
89.9 FM
Radio Cayman
101.9 FM
Rooster 101
92.7 FM
Star
103.1 FM
Love
94.3 FM
Westpoint / Lifetalk Radio
104.1 FM
Hot
94.9 FM
Spin
105.3 FM
Breeze
95.5 FM
Big Fish
106.1 FM
Kiss
96.5 FM
CayRock
107.1 FM
X107
98.9 FM
Vibe
107.9 FM
Weather
3. Loosen the cable antenna and adjust its direction to get the best reception if necessary.
4. To turn off the radio, slide the Function switch to OFF position.

AUX-IN FUNCTION
To play music from an iPod or smartphone through the radio speaker, use the double headed cable
in the Aux-In socket or bedside table drawer to connect the player to the radio.
CLOCK SETTING
Time and alarm settings can be operated while the radio is in any mode.
Time setting: Press and hold the Time set button and then press the Hour or Minute button for hour
and minute adjustment of the time. If the PM light in the front of the radio is illuminated, then the
time you are currently setting is PM (afternoon/evening).
Alarm Setting: Press and hold the Alarm set button and then press the Hour or Minute button for
hour and minute adjustment of the time.
WAKE TO MUSIC
Use this sequence to set up to wake up to music:
Press and hold the Alarm set button and then press Hour or Minute button to set the
desired wake up time.
Release the Alarm set button to show the current time.
Repeat the steps of LISTEN TO RADIO to tune to your desired station and set the listening
volume level.
Slide the Function switch to AUTO position.
As a confirmation, the Alarm indicator will on.
The radio will play your selected station at the preset listening level automatically at the
preset alarm time.
Push the Function switch to the OFF position to turn off the daily radio alarm.
WAKE T0 BUZZER
Use this sequence to set up to wake up to music:
Press and hold the Alarm set button and then press Hour or Minute button to set the
desired wake up time.
Release the Alarm set button to show the current time.
Rotate the Volume control clockwise until a clicking sound is heard.
You will be awakened by the buzzer alarm.
Push the Function switch to the OFF position to turn off the daily buzzer alarm.
SNOOZE FUNCTION
If you want a few extra minutes of sleep after the alarm wakes you, press the Snooze Button. The
music or buzzer alarm will be temporarily switched off and will turn on again in approximately 9
minutes.
Push the Function switch to OFF to turn off the snooze function.
SLEEP TO MUSIC
Slide the Function switch to the position either OFF or AUTO.
Press the Sleep Button once for 59 minutes of radio.
To increase or reduce the automatic shut off time, hold down the Sleep button

and press Hour or Minute to adjust as required. Maximum sleep time is 1 hour and 59 minutes.
SLEEP AND WAKE T0 MUSIC
Repeat the steps of WAKE TO MUSIC
Press the Sleep Button to set the desired length of time of radio playing before sleep.
The radio will stop automatically on expiry of your sleep time setting and will play again at
your preset wake up time.
BATTERY BACKUP
The sole purpose of the battery is to maintain the clock time until AC power is restored. Insert a 9
Volt battery in the battery compartment. Should there be a power failure, the clock will continue to
function but the clock display will not illuminate. When AC power is restored, the display will
indicate the correct time. Remember that the alarm clock functionality does not work while on
battery.
BATTERY REPLACEMENT
Replace the battery once a year or immediately if clock time is not maintained during a power cut.