SWAP
PressSwapkeyatacertainchannelnumbertotogglebetweenthepreviouslyviewedchanneland
thepresentone.
SLEEPTIMER
Press the key repeatedly to set up the time in increments of 15 minutes up to a limit of 120
minutes.Settingitupputsthetelevisionintothestandbymodeattheendofthetimesetup.
MUTE
Pressthemutekeytoreducethevolumeleveltohalfthevolumelevel.Pressingitagainmakesthe
soundinaudible.
PICTUREMUTE
The picture goes off with the press of this key, leaving the audio on. Alarm lamp on the front
panelblinkstoindicatethatthefeatureison.
MAGICEYE
Press the key to activate this feature so that the screen automatically adjusts to an optimum
picturesettingaccordingtothelightingconditionsofyourroom.
Note:PressingtheVSMkeyswitchesthedigitaleyeoff.
CHILDTIMER
You need not bother about TV viewing of your child when you are away/out of home. Just set
ChildTimerfeatureON.PressChildTimerkey.
• Press4repeatedly (at the desired channel you wish your child should watch) to set the
viewingtimeinincrementsof5minutesuptoalimitof120minutes.
• Press6keyandthen4keytochangetheVSMsettingsasdesired.
• Press 6key and then4key to set the maximum volume you want your child to hear the
programat.
• Press‘Menu’keytoactivateCHILDTIMER.
Oncetheset timehaselapsed,youset willswitchOFFautomatically.WhenyouswitchONthe
setitwillaskyouforpassword.
Note: No keys on the remote except (Power and Volume) will work, when child timer is
activated.
SWAPTIMER
To avoid viewing advertisements, press the Swap Timer key to get a screen indicating Timer
Return.PressSwapTimerkey to setthe time inincrements of30seconds. Havingsetthe time,
you may now move to any other channel. After the time lapses, the picture switches to the
channeloriginallybeingviewed.
Note:Tocometotheoriginalchannelprematurely,simplypresstheSwapTimerkeyonce.
16
4. INSTALLATION
1.TURNINGYOURTVON
• EnsurethatthesetispluggedonandpressthemainpowerbuttonontheTVtoswitchtheTV
ON.Thepowerlamponthefrontpanelglows.
• If no image appears on the screen after 20 secs., your TV is in stand by mode. Press the
POWER button on the remote control or CHANNEL (or CHANNEL +/-) keys or
anyofthenumerickeystoswitchtheTVON.
• To switch theTV off, press the power button on the remote. TheTV is switched to standby
mode.Toturn theTV'smain poweroff,pressthe mainpower buttonon theTV.The power
indicatorlampstopsglowingtoindicatepowerhasbeenturnedoff.
2. SEARCHINGFOR&STORINGTVCHANNELS
You must first store stations to channels in order to view a TV Program Press ‘MENU’ and
press4fourtimes.
AutoTune
YoucanautomaticallystoreallTVstationstochannelsonyour
TVbyonesimpleoperation.
• Afterabovementionedoperation,press6toselect‘AUTO
TUNE’(Fig4.1)
• Press4keytostart‘AUTOTUNE’
• Changing channel numbers and frequency bar appear on
screentoindicatetheprogressoftuningprocess.
Note:To stopAutoTuning,press DISPkey or MENUkey on
remote.
SelectiveAutoTune
Byselectingthisoption,tuningwillstartfromtheProgramNodisplayedonyourscreen.
Note:TostopAutoTuning,pressDISPkeyorMENUkeyonremote.
ChannelSearch
Set channel number by pressing 3/4repeatedly at PROGRAM NO. To search desired
channelpress3/4keyrepeatedlyatchannelsearch.
Note:TostopChannelSearch,pressDISPkeyorMENUkeyonremote.
5/6
5
PROGRAM NO. 14
AUTO TUNE
SELECTIVE AUTO TUNE
CHANNEL SEARCH
FINE TUNE
AFT ON/OFF
PASSWORD
VHF
Fig. 4.1
