OnPoint OPG7CDAASSPSS User manual

SAFETY INFORMATION ........... 3
PARTS INCLUDED .................... 4
CONTROLS................................ 5
USING THE COFFEE MAKER .... 5
CARE AND CLEANING ............. 6
LIMITED WARRANTY................ 7
CONSUMER SUPPORT............. 8
OWNER’S MANUAL
OPG7CDAASSPSS
OPG7CDABSSPSS
ENGLISH
Write the model and serial numbers here:
Model #
Serial #
Find these numbers on a label
on the back of the unit.
DRIP COFFEEMAKER

2
IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
CAUTION
IMPORTANT SAFEGUARDS
Before using the electrical appliance, the following basic
precautions should always be followed including the following:
1. READ ALL INSTRUCTIONS.
2. Do not touch hot surfaces. Use handles and knobs
3. To protect against fire, electric shock and injury to persons
do not immerse cord, plug, or base unit in water or other
liquid.
4. Close supervision is necessary when your appliance is
operating. Do not let the appliance on the standby state for
a long time. And never allow the children or inform persons
to operate the appliance.
5. Unplug from outlet when not in use and before cleaning.
Allow to cooling before putting on or taking off parts, and
before cleaning the appliance.
6. Do not operate any appliance with a damaged cord or plug
or after the appliance malfunctions, or has been damaged
in any manner. Return appliance to an authorized service
facility for examination, repair or adjustment.
7. The use of attachments not recommended by the appliance
manufacturer may result in fire, electric shock or injury to
persons.
8. Do not use outdoors.
9. Place appliance on flat surface or table, do not let cord
12. To disconnect, turn the switch to “Off”, remove plug from
wall outlet. Always hold the plug. But never pull the cord.
13. The carafe is designed for use with this appliance. It must
never be used on a range top.
14. Do not clean carafe with cleansers, steel wool pads, or
other abrasive material.
15. Never leave the empty carafe on the keeping warm plate
otherwise the carafe is liable to crack.
16. Never use the appliance if the carafe shows any signs of
cracks or carafe having a loose or weakened handle. Only
use the carafe with this appliance.
17. Do not set a hot carafe on a wet or cold surface.
18. This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliances by a person responsible
for their safety.
19. Close supervision is necessary when any appliance is
used near children.
20. Do not use appliance for other than intended use.
21. FOR HOUSEHOLD USE ONLY.
WARNING
hang over edge of table or counter, or touch hot surface.
10. Do not place on or near a hot gas or electric burner, or in
a heated oven.
11. Do not use appliance for other than intended use.
22. TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE THE BASE
PANEL. NO USER SERVICEABLE PARTS ARE INSIDE.
REPAIR SHOULD BE DONE ONLY BY AUTHORIZED
PERSONEL.
WARNING RISK OF FIRE OR ELECTRIC SHOCK
■TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). ■Do not attempt to repair or replace any part of your food processor unless it is specifically recommended in this
manual. All other servicing should be performed by
authorized service personnel.
Notes on the cord plug:
This appliance has a polarized plug, To reduce the risk of electric
shock, this plug is intended to fit into a polarized outlet only one
way, If the plug does not fit fully into the outlet, reverse the plug, If
it still does not fit, contact a qualified electrician, Do not attempt to
modify the plug in any way.
Notes on the cord:
a) A short power-supply cord (or detached power-supply cord) is
to be provided to reduce risks resulting from becoming entangled
in or tripping over a long cord.
b) Longer detachable power-supply cords or extension cords are
available and may be used if care is exercised in their use.
c) If a long detachable power-supply cords or extension cord is
used,
1) The marked electrical rating of the detachable power-supply
cord or extension cord should be at least as great as the electrical
rating of the appliance.
2) The longer cord should be arranged so that it will not drape
over the counter top or table top where it can be pulled on by
children or tripped over.
READ AND SAVE THESE INSTRUCTIONS 3
SAFETY INFORMATION

4
PARTS INCLUDED
Parts Included
Appearance may vary by model
Top Cover
Filter
Funnel
Water Tank
Control Panel
Water Guage
Lid
Handle
Carafe
Power Cord
Warming Plate
Controls
Hr. AutoBrewOn Auto Auto Brew
Clock
Buttons
Min.
Cleaning
AM
PM
Bold
Brew
Bold
Button
Bold Button
Brew / Cancel
Button
NOTE: If your model number is G7CDAASSPSS, continue to page 5.
NOTE: If your model number is, G7CDABSSPSS, skip to page 6.
Brew
Cancel

5
Using the Glass Carafe Drip Coffee Maker
Before Use
•For the first time use, remove packing material and clean the main
unit / accessories.
•Clean the main unit / accessories when you have not used for a long
time.
How to Use
1. Lift to open the Coffee Maker lid. Fill carafe with cold tap waterand
pour into water reservoir at the back of the unit. The stepped water
level indicator can be easily viewed insideunit.
IMPORTANT: Before brewing, always check to make sure water level
is past the MIN line and add water if needed. Never exceed the MAX fill
line.
NOTE: The amount of brewed coffee will always be less than the
amount of water placed into the water reservoir; as much as 10% is
absorbed by coffee grounds and filter.
2. Place empty carafe on the warming plate.
3. Place the permanent filter in the removable filter holder.Measure
2 level tablespoons of drip or regular grind coffee for each cupof
coffee desired. For stronger or milder coffee, adjust amount of coffee
to suit your taste.
4. Drop the filter holder down into the housing. Close thelid.
5. Plug Coffee Maker into a 120V AC electrical walloutlet.
6. Connect the appliance with the power source of 120V 60Hz, then
open the top lid and fill the water tank with maximum amount of
room-temperature water (20-25°C), and then close the top lid.
Connect the appliance with the power source of 120V 60Hz, then
open the top lid and fill the water tank with maximum amount of room-
temperature water (20-25°C), and then close the top lid.
After power on, press “BREW/CANCEL” key once, the indicator
illuminates in white, the relay functions, at that time, the heating element
starts to work, which indicates the appliance starts to brew coffee. The
Brew icon will appear on the LCD display.
Press “BREW/CANCEL” once, the relay disconnects, the white indicator
turns off, which means the appliance stops brewing coffee.
After boiling away the water in the water tank, the thermostat functions
and the appliance enters into the keep-warm mode, after keeping warm
for 2 hours, the indicator turns off, and the appliance enters into the
standby mode.
Connect the appliance with the power source of 120V 60Hz, the LCD
display shows 12:00 AM (“:” does not blink). The appliance enters into
the clock-setting mode. Press “HR” and “MIN” keys to set the current
time. If there is not any operation within 15 seconds, the current time
shown in the LCD display will be confirmed and the appliance will enter
into the standby mode.
Set the clock
A. Shortly press “HR” key once, one hour can be changed. Hold and
press “HR” key, the “hour” can be increased continuously.
B. Shortly press “MIN” key once, one minute can be changed. Hold and
press “MIN” key, the “minute” can be increased continuously.
C. After setting the time, press “BREW/CANCEL”, “Auto Brew” or “Bold”
to confirm the set current time, alternatively, do not operate the
appliance for 15 seconds and then the set current time isconfirmed.
When the appliance is under the standby mode, hold and press “HR” or
“MIN” key for more than 3 seconds to enter into the clock setting mode.
Function selection:
A. Regular coffee: Press the "Brew / Cancel" key once, the “Regular
coffee” is selected, and the white indicator turns on, the appliance
starts to brew coffee. After boiling away the water in the water tank,
the thermostat functions and the appliance enters into the keep-warm
mode and the white indicator off. After keeping warm for 2 hours, the
appliance turns off automatically. Press “Bold” key under the “Regular
coffee” mode, the LCD display will show “Bold” and the “Bold coffee”
mode is selected.
B. Bold coffee: Press “Bold” key , the LCD display shows “Bold” and
the “Bold coffee” mode is selected. Press the "Brew/Cancel" key
once, the white indicator turns on, the appliance starts to brew strong
coffee. After boiling away the water in the water tank, the thermostat
functions and the appliance enters into the keep-warm mode. The
bold function can only select in the standby mode or the Auto-Brew
mode.
C.Press and hold the "Brew/Cancel" button for 3 seconds to enter
"Clean" mode at any time. 80 cycles is not required to enter the clean
mode. Once clean mode is activated, the heater will turn on. ”Clean”
function: When the appliance has worked for 80 cycles cumulatively,
the LCD display shows "Cleaning" to remind the user that the
appliance needs to be cleaned. Hold and press the "BREW/CANCEL"
key for more than 3 seconds in any status, the white indicator turns
on, and the cleaning program is started, the heating elements works
until the water in the water tank is boiled away. Then the appliance
will enter into the standby mode. The “Cleaning” shown in the LCD
display can only be canceled after the de-scaling is finished.
D. Under the keep-warm condition, press “BREW/CANCEL” key to
cancel the keep-warm function, at that time, the LCD display shows
the current time and the appliance enters into the standbymode.
”Auto Brew” function
A.Press “Auto Brew” key, the LCD display shows “Auto Brew on” and
“AM 1:00”, then set the auto-brew time by following the operation
of setting the clock. After finish setting, press “ Auto Brew” key,the
display shows “Auto Brew on”, and the auto-brew time stops blinking,
then the appliance enters into the auto-brew mode, after 5 seconds,
the appliance goes back to the main interface, at that time, the LCD
display shows “Auto Brew on” and current time, which means the
auto-brew function is confirmed. The LCD display will turn off 1 minute
after the coffee maker enters the warming state.
B.Press “Bold” key, the LCD display shows “Auto Brew on”, “Bold” and
the current time, which means the “Auto Brew” function for “Bold
coffee” mode is confirmed.
C. When the auto-brew time is reached, the white indicator of“BREW/
CANCEL” key lights up, and the coffee-brewing function is activated.
D. Can press “Auto Brew” key to cancel the auto-brew function when
the appliance works under the auto-brew mode. After the auto-brew
function is confirmed, press “BREW/CANCEL” key, the appliance will
start to brew coffee and the current auto-brew function iscanceled.
7. Press the START button. The Coffee Maker will begin thebrew
cycle.
NOTE: To interrupt the brewing process at any time, press the BREW
button; then remove plug from wall outlet.
8. Turn off the unit: press and hold STARTbutton, you can stop brewing
coffee, it will display keep warm time, which count from 0:00, after 1
min the display will off. The appliance will cut off power automatically
and enter sleep mode after two hours.
USING THE DRIP COFFEE MAKER

6
USING THE COFFEE MAKER
Using the Stainless Carafe Drip Coffee Maker
Before Use
•For the first time use, remove packing material and clean the
main unit / accessories.
•Clean the main unit / accessories when you have not used for
a long time.
How to Use
1.Lift to open the Coffee Maker lid. Fill carafe with cold tap
water and pour into water reservoir at the back of the unit.
The stepped water level indicator can be easily viewed inside
unit.
IMPORTANT: Before brewing, always check to make sure
water level is past the MIN line and add water if needed. Never
exceed the MAX fill line.
NOTE: The amount of brewed coffee will always be less than
the amount of water placed into the water reservoir; as much as
10% is absorbed by coffee grounds and filter.
2. Never place empty carafe on the warming plate.
3. Place the permanent filter in the removable filter holder.
Measure 2 level tablespoons of drip or regular grind coffee
for each cup of coffee desired. For stronger or mildercoffee,
adjust amount of coffee to suit your taste.
4. Drop the filter holder down into the housing. Close thelid.
5. Plug Coffee Maker into a 120V AC electrical walloutlet.
6. Connect the appliance with the power source of 120V 60Hz,
then open the top lid and fill the water tank with maximum
amount of room-temperature water (20-25°C), and thenclose
the top lid.
Connect the appliance with the power source of 120V 60Hz,
then open the top lid and fill the water tank with maximum
amount of room-temperature water (20-25°C), and then close
the top lid.
After power on, press “BREW/CANCEL” key once, the indicator
illuminates in white, the relay functions, at that time, the
heating element starts to work, which indicates the appliance
starts to brew coffee. Press “BREW/CANCEL” once, the relay
disconnects, the white indicator turns off, which means the
appliance stops brewing coffee. After boiling away the water in
the water tank. The indicator turns off and the appliance enters
into the standby mode.
Connect the appliance with the power source of 120V 60Hz, the
LCD display shows 12:00 AM (“:” does not blink). The appliance
enters into the clock-setting mode. Press “HR” and “MIN” keys
to set the current time. If there is not any operation within 15
seconds, the current time shown in the LCD display will be
confirmed and the appliance will enter into the standby mode.
Set the clock
A. Shortly press “HR” key once, one hour can be changed.
Hold and press “HR” key, the “hour” can be increased
continuously.
B. Shortly press “MIN” key once, one minute can be changed.
Hold and press “MIN” key, the “minute” can be increased
continuously.
C. After setting the time, press “BREW/CANCEL”, “Auto Brew”
or “Bold” to confirm the set current time, alternatively, do
not operate the appliance for 15 seconds and then the set
current time is confirmed.
When the appliance is under the standby mode, hold and press
“HR” or “MIN” key for more than 3 seconds to enter into the
clock setting mode.
Function selection:
A. Regular coffee: Press the "Brew / Cancel" key once, the
“Regular coffee” is selected, and the white indicator turns on,
the appliance starts to brew coffee. After boiling away the
water in the water tank, the white indicator off. Press “Bold”
key under the “Regular coffee” mode, the LCD display will
show “Bold” and the “Bold coffee” mode is selected.
B. Bold coffee: Press “Bold” key , the LCD display shows “Bold”
and the “Bold coffee” mode is selected. Press the "Brew/
Cancel" key once, the white indicator turns on, the appliance
starts to brew strong coffee. The bold function can onlyselect
in the standby mode or the Auto-Brewmode.
C. ”Clean” function: When the appliance has worked for 80
cycles cumulatively, the LCD display shows "Cleaning" to
remind the user that the appliance needs to be cleaned.
Hold and press the "BREW/CANCEL" key for more than 3
seconds in any status, the white indicator turns on, and the
cleaning program is started, the heating elements works until
the water in the water tank is boiled away, then the appliance
will enter into the standby mode. The “Cleaning” shown in
the LCD display can only be canceled after the descaling is
finished.
”Auto Brew” function
A. Press “Auto Brew” key, the LCD display shows “Auto Brew
on” and “AM 1:00”, then set the auto-brew time by following
the operation of setting the clock. After finish setting, press “
Auto Brew” key, the display shows “Auto Brew on”, and the
auto-brew time stops blinking, then the appliance enters into
the auto-brew mode, after 5 seconds, the appliance goes
back to the main interface, at that time, the LCD display
shows “Auto Brew on” and current time, which means the
auto-brew function is confirmed.
B. Press “Bold” key, the LCD display shows “Auto Brew on”,
“Bold” and the current time, which means the “Auto Brew”
function for “Bold coffee” mode is confirmed.
C. When the auto-brew time is reached, the white indicator
of “BREW/CANCEL” key lights up, and the coffee-brewing
function is activated.
D. Can press “Auto Brew” key to cancel the auto-brew function
when the appliance works under the auto-brew mode. After
the auto-brew function is confirmed, press “BREW/CANCEL”
key, the appliance will start to brew coffee and the current
auto-brew function is canceled.
7. Press the START button. The Coffee Maker will beginthe
brew cycle.
NOTE: To interrupt the brewing process at any time, press the
BREW button; then remove plug from wall outlet.
8. Turn off the unit: press and hold START button, you can stop
brewing coffee.

7
Care and Cleaning
Besuretounplugthisappliancebeforecleaning.Toprotect
againstelectricalshock, do not immerse cord,plug orunit
inwater orliquid.After each use,always make sureplug is
first removed from walloutlet.
1. Cleanalldetachablepartsaftereachuseinhotsudsy
water.
2. Wipetheexteriorsurface of unitwithasoft, dampcloth
to remove stains.
3. Water droplets may buildup in the above area of the
funnelanddripontotheproductbaseduringbrewing.To
control the dripping, wipe off the area with a clean, dry
cloth after each use.
4. Replace all parts and keep for next use.
Removing Mineral Deposits
Tokeepyourcoffeemakeroperatingefficiently,periodically
you should clean away the mineral deposits left by the
water according to the water quality in your area and the
usefrequency,werecommendremovingmineraldeposits
as follows:
1. Fill the tank with water and descaler to the max level as
indicatedonwatergauge (thescale ofwater anddescaler
is4:1,thedetail refersto the instruction ofdescaler.Please
use“household descaler”, youmayalso usethe citricacid
insteadofthedescaler(theonehundred partsofwaterand
three parts of citricacid).
2. Place the serving cup under the brew basket.
3. Make ensure funnel are assembled in place.
4. Switchontheapplianceandallowitto“brew” de-scaling
solution.
5. After “brew” one-cup solution, switch off the appliance.
6. Leavethesolutionstayfor15minutes andrepeatstep
3-5.
7. Switchontheapplianceandrunoff thesolution untilthe
water tank is completelyempty.
8. Rinsebyoperatingtheappliancewithwateratleast3
times.
Hints for Great-Tasting Coffee
1. Acleancoffeemakerisessentialformakinggreat-tasting
coffee. Regularly clean the coffee maker as specified in
the“CLEANING ANDMAINTENANCE” section.Always
use fresh, cold water in the coffee maker.
2. Store unused coffee powder in a cool, dry place. After
openingapackageofcoffeepowder,resealittightlyand
store it in a refrigerator to maintain its freshness.
3. Foranoptimumcoffeetaste,buywholecoffeebeans
and finely grind them just before brewing.
4. Donotreusecoffeepowdersincethiswillgreatlyreduce
thecoffee’ flavor.Reheatingcoffeeisnotrecommended
as coffee is at its peak flavor immediately after brewing.
5. Cleanthecoffeemakerwhenover-extractioncauses
oiliness.Smalloildropletsonthesurfaceofbrewed,
black coffee are due to the extraction of oil from the
coffee powder.
6. Oilinessmayoccurmorefrequentlyifheavilyroasted
coffees are used.
Anyotherservicingshouldbeperformedbyanauthorized
service representative.
CARE AND CLEANING

8
Notes
NOTES

9
Small Appliances Limited Warranty
Pleasehaveyourserialnumberandyourmodelnumberavailablewhenrequestingservice at
https://www.onpointwarranty.com/small-appliances-cx-portal
For Terms and Conditions, please visit
https://f.hubspotusercontent20.net/hubfs/4854028/GE_First%20Build/RefurbGoodsT&C.pdf
Staple your receipt here. Proof of the original purchase date is needed to obtain service under the warranty.
LIMITED WARRANTY

10
CONSUMER SUPPORT
Consumer Support
Service and Registration
Register your new appliance on-line at your convenience! Timely product registration will allow for enhanced
communication and prompt service under the terms of your warranty, should the need arise.
Register your appliance at https://www.onpointwarranty.com/small-appliances-cx-portal
Contact Us
If you are not satisfied with the service you receive from OnPoint Warranty , contact us on our Website
https://www.onpointwarranty.com/small-appliances-cx-portal or at 9900 Corporate Campus Drive, Suite 2050,
Louisville, KY 40223.