6
5. Capturing and Reviewing Still Images
To capture a still image, press on the Capture button or footswitch. The image will be
saved to the SD-card in “JPG” format with a sequence number.
To review a captured image, press on the Menu button. A list of saved images will appear
on the left side of the screen. To scroll through the list either step through one at a time by
pressing on the Menu button or fast scroll by press and keeping the Menu button pressed.
Current highlighted image will be displayed.
To go back to live image, Select “Live” on the image list or press the Run button.
6. Displaying a Graticule on Live Image (OP-009 081)
A transparent or semi-transparent picture can be blended with the live image by HD-CAP.
Start with CAD file of your part or product and generate your own ”Digital Graticule”
containing measurement lines, geometry figures, patterns, annotations, etc. and move them
to the SD-card.
Graticule images are saved on SD-card in PNG format and automatically recognised by HD-
CAP for superimposing on live video of your HD inspection camera.
To review and select the desired graticule press and hold the …Graticule button down
until the list appears in the top left of the screen. To scroll through the list either step
through one at a time by clicking the Menu button or fast scroll by press and keeping
Menu button pressed.
To select the desired graticule, press the …Confirm button. A confirmation message will
appear. Toggle between “Confirm” and “Cancel”with the Menu button and select with
…Confirm button. Select “Live” on the list or press the Run button to close the graticule
list.
To go remove the digital graticule, press and hold button …Graticule and select “Live”
from the graticule list.
Note: The digital graticule must be “PNG” image with transparent background and the image
resolution should match the HD Camera’s resolution.
