Optilia Flexia Definition HM ESD User manual

1
This manual describes how to setup and use Flexia Definition Digital (ESD-protected and Blue)
Instructions Manual
Flexia Video Inspection Microscope
Flexia Definition HM ESD
Flexia Definition ESD
Flexia Definition HM Blue
Flexia Definition Blue

2
Contents
1. Safety and maintenance Instructions 3
2. About Flexia 4
3. Installation 5
4. Image view & Capture in OptiPix software 5
5. Working distance and Focus adjustment 6
6. Illumination 7
7. Notes 8

3
1. Safety and maintenance Instructions
Avoid looking directly into the lenses when illumination is turned on.
Do not scratch or hit optical surfaces of Flexia! This precaution is
important especially when you operate the device on free hand.
Only use DC Power Sources provided or approved by Optilia.
Only use accessories provided or approved by Optilia.
Keep Flexia clean. Use Lens Cleaning Tissue and Pure Ethanol or
Isopropyl alcohol for cleaning optical surfaces of the device.
Never use Acetone or other similar strong solvents for cleaning.
Never knock or drop the video microscope.
Keep the microscope away from direct sun-light, heat and extreme
humidity.
Store the equipment inside its transport case when not used.
Protect the Flexia lens, Objective lens and Zoom lens by the supplied
protection rubber Caps or store them inside their boxes when the
equipment is not used.
This device is precision optical equipment and shall be
handled with great care!
Avoid looking directly into the lenses when illumination
is turned on!

4
2. About Flexia
Flexia is a lightweight, mobile and highly flexible digital video microscope with
zoom optics and built-in long-life LED illumination adapted to the electronics
industry. Flexia provides excellent live image quality, flexibility, digital image
recording and documentation.
The microscope delivers a digital USB 2.0 signal for recording pictures or
performing software measurements. Flexia is designed for mobile and flexible
inspection, quality control, measurement and digital recording.
There are four different versions of Flexia available:
ESD, HM ESD, BLUE and HM Blue.
ESD means that Flexia housing and cables are ESD protected. Flexia ESD is
fully safe for inspection of sensitive electronic boards and devices.
HM implies that Flexia provides with even higher magnification capabilities and
larger working distance.
Illumination control
(Dimmer)
AUX DC output
12/5V 15W
Supporting pin and
Focus adjuster
Zoom ring/ Focus position
Lens
Pull out to remove.
Push in to snap.
Image capture switch
On/Off switch
and indication
LED
Threaded hole for
Stand (UNC ¼” -20)

5
3. Installation
Flexia is directly connected to USB2.0 port of PC or Laptop with MS-Windows
OS. Follow the instructions below to install Flexia to a PC.
1. Ensure that Flexia is not plugged to the USB port before installing the
drivers.
2. Insert the provided installation CD into your PC and follow the on
screen instructions.
3. When the installation is finished you have to reboot the PC before
connecting the device.
4. When the PC is rebooted insert Flexia into one of the available USB2.0
port. The drivers will now be automatically found.

6
4. Image view & Capture in OptiPix software
Flexia in combination with Optilia OptiPix Measurement and Analysis
Software, the system becomes a flexible and powerful digital vision system
for performing accurate measurements, analysis, documentation and
reporting.
1. Ensure that Flexia drivers are installed, see chapter installation for further
instructions.
2. Install Optilia OptiPix from the provided installation CD. On “Select OptiPix
Version” dialog box, select:
a. “OptiPix Full” if you have ordered a full license and the software
protection USB dongle. All software functions will be enabled.
Insert the dongle into a free USB port of your computer. Enter your
license number.
b. “OptiPix Lite” if you have ordered a lite license. Image view, capture,
annotation and only distance measurement on image will be
enabled. Enter your license number.
c. 30 days demo for 30 days trial. All software functions will be enabled
for 30 days.
3. Select “Optilia 2.0MP Camera” in the next dialog, which will start
monitoring live image.
4. Select Device/Device Resolution to adjust image resolution.
5. Select Device/Device Properties to adjust image properties.
6. To snap a picture select a folder in the tree view then press F11 or the
trigger button of the device.
7. For further instructions and functionality, refer to the Quick Help. Select
Help/Quick Help to open the Quick Help.

7
5. Working distance and Focus adjustment
Image magnification (as well as the object distance) is changed by rotating
the “zoom ring” as illustrated below. Move Flexia slightly forward/backward
and rotate the Zoom adjuster to get into the best focus.
6. Illumination
Flexia lenses are equipped with high intensity white light emitting diodes.
Illumination intensity of the device can be adjusted via the control knob at the
rear of Flexia. The illumination may be turned on or off by using the on/off
switch.
Telescopic pin
Zoom ring
Illumination intensity
control (Dimmer)
On/Off switch
and indication
LED

8
7. Notes
…………………………………………………………………………………………………………
…………………………………………………………………………………………………………
…………………………………………………………………………………………………………
…………………………………………………………………………………………………………
…………………………………………………………………………………………………………
…………………………………………………………………………………………………………
All rights reserved. The information contained herein is designed only for use with Optilia
Instruments AB,s Video Microscope Flexia Definition ESD, Flexia Definition HM ESD, Flexia
Definition Blue and Flexia Definition HM Blue. Optilia Instruments AB is not responsible for any use
of this information for other purposes. Optilia Instruments AB shall not be liable to the purchaser of
this product or third parties for damages, losses, costs or expenses incurred by the purchaser or
third parties as result of: accident, misuses, or abuse of this product or unauthorized modifications,
repairs or alternations to this product, or failure to strictly comply with Optilia Instruments AB´s
operating and maintenance instructions
Optilia Instruments AB shall not be liable for any damages or problems arising from the use of any
options or any consumable products other than those designated as original Optilia products or
Optilia approved products by Optilia Instruments AB.
Optilia Instruments AB shall not be held liable for any damages resulting from from electromagnetic
interference that occurs from the use of any interface cables or devises other than those provided
by or designated as Optilia-approved Products by Optilia Instruments AB.
Djupdalsvägen 22
S-192 51, Sollentuna
Sweden
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Web: www.optilia.eu
Rev A, August 12