Optimus GB100MG User manual

GB100MG
Real time GPS Tracker
To activate your tracker, please follow these easy steps
Go to our website
www.OptimusTracker.com
Click on the “Activate Tracker” link.
Fill out the form. You will need the
IMEI number.
It’s the 15-digit number that is printed
on the tracker’s labels.
After subscribing, wait a minute for
the activation email.
Make sure to check your spam/junk folder too.
· Instant Alerts
· Real-Time Tracking
· FCC Certified Unit
· Route details
· One-Time install
· Geofence
· History Reports
· Speed monitoring
· Harsh driving reports
· App and web access

GB100MG
Real time GPS Tracker
Optimus GPS Tracking
[email protected]
[email protected]
Tel: [phone]
Installation Instructions:
1. Locate your vehicle battery and carefully loosen the nuts located on the top of the battery.
You should see Positive (Red) and Negative (Black).
2. Take your Tracker and carefully insert the end of the Positive (Red Wire) onto the shredded
shaft of the Positive and the Negative (Black Wire) onto the shredded shaft of the Negative.
3. Once they are both secure, tighten both nuts back onto the battery so it clamps the end of
the Tracker Wire on tightly.
4. Clean the surface of the battery and the Tracker.
5. Take the double-sided tape and stick your Tracker to the top of the battery with the arrow
facing the heading direction of the vehicle.
Please note: there could be an electric spark
from the battery during installation.
Seek professional help if you need it.
Videos: www.OptimusTracker.com/videos
FAQ: www.OptimusTracker.com/faq