Optoma Europe Limited 42 Caxton Way, Watford Business Park, Watford, Hertfordshire. WD18 8QZ
Tel: +44 (0) 1923 691800 Fax: +44 (0) 1923 691888
www.optoma.co.uk
†“ANSI Contrast” is a recognised contrast measurement technique as described in the standard IEC 61947-1
Copyright © 2012, Optoma Europe Ltd. All other product names and company names used herein are for identification purposes only and may be trademarked or registered trademarks of their respective owners. 1Brightness and lamp lifetime will vary depending on selected projector mode, environmental conditions and usage. As is common with all lamp
based projectors, brightness will decrease over the lamp lifetime. 2Typical lamp life achieved through testing. Will vary according to operational use and environmental conditions. Errors and omissions excepted, all specifications are subject to change without notice. DLP®, BrilliantColor™ and the DLP logo are registered trademarks of Texas Instruments.
Some images may be simulated. All images of products are for representation purposes only. Whilst every care is taken to provide accurate images of our products, actual products may differ slightly. Some product images may have been digitally altered by us to add an Optoma logo to the front panel. Optoma reserves the right to amend or alter actual product or
product images without notice. Some images may be simulated.
HD300X
V5- 29/05/12
1
3 64 5 9
2
7
Connections
13D Sync Out (VESA)
2 +12V Trigger
32 x HDMI (1.4a 3D)
4VGA (PC/YPbPT)
5Component Video
6Composite Video
7RS232
8Kensington™ Lock
9Power
HD300X Specifications Highlights
Full HD Native 1080p (1920 x1080)
ANSI Contrast 400:1 ANSI
Dynamic Contrast 8000:1
Brightness11600 ANSI Lumens
Audible Noise 27dB
Throw Ratio 1.5 ~ 1.8
Lamp Life2(ECO) 4000 Hours
Inputs
2 x HDMI 1.4a (3D Supported),
Component, VGA (PC\SCART),
Composite
Output 3D Sync Out (3-Pin VESA)
Video Compatibility 1080p, 1080i 720p, PAL, NTSC, SECAM
3D Compatibility
Side-by-Side:1080i50 / 60, 720p50 / 60
Frame-pack: 1080p24, 720p50 / 60
Over-Under: 1080p24, 720p50 / 60
Dimensions 380 x 313 x 122mm
Weight 4.5 kg
3D Viewing
Requires the Optoma 3D-RF System -
available separately. (Additional 3D-RF
Glasses are also available)
(DLP-Link shutter-glasses are
also supported)
Warranty Warranty may vary by country. Please see
or ask your local supplier for details
EAN Number 5060059045754
For full specifications please visit the website at: www.optoma.co.uk
8
Backlight Remote Control
Distance Table
Projection
Distance (m)
Horizontal Image
Size (m)
Vertical Image
Size (m)
Diagonal Image
Size (m)
Diagonal Image
Size (inch) Image Offset (m)
1.20
2.00
2.50
3.00
4.00
5.00
0.80
1.33
1.67
2.00
2.67
3.33
0.45
0.75
0.94
1.13
1.50
1.88
0.92
1.53
1.91
2.29
3.06
3.82
36.14
60.23
75.29
90.34
120.46
150.57
0.07
0.12
0.15
0.18
0.24
0.30
