Oricom WRC001 User manual

WRC001 Wireless Reversing Camera
with Magnetic Base
User Manual
Smart device not included.
11

Need Help?
If you need assistance setting up or using your Oricom product now or in
the future, call Oricom Support.
Australia [phone]
www.oricom.com.au
Mon-Fri 8 am – 6 pm AEST
New Zealand 0800 67 42 66
www.oricom.co.nz
Mon-Fri 10 am – 8 pm NZST
Pack Contents
1 x WRC001 Wireless reversing camera
1 x Magnetic base
1 x USB Charging cable (5V Power Adaptor not supplied)
1 x Velcro mounting tape*
Approx. 4.5h
Operating Current
17.3dBm (53.5mW)
WiFi
Ingress Protection Rating IPX6
Recharge Time
Up to 15m (without obstruction)
2160mAh
Velcro Tape Installation Instructions
*Velcro Tape: 3M™ Dual Lock™ Reclosable Fastener SJ3550
It is strongly recommended that the surface is thoroughly cleaned prior
to application using IPA wipes, you can also use a primer to increase
adhesion further.
Installation temperature should be between 20-27°C, The pressure
sensitive adhesive tape requires a clean dry surface and firm even
pressure (15psi) to ensure good contact with the surface of the substrate
to which it is being applied.
It is advised to wait one hour after tape installation before installing the
camera.
Battery Capacity
Battery Voltage
Max Recharge Current
Transmit Power
Wireless Communication
Format
Wireless Transfer Distance
Key Features:
- View camera feed on FREE App
- Infrared night vision (Black and white image)
- Colour daytime view
- Waterproof IPX6
- Up to 15m Range
- USB Charging
- Included Velcro for Flexible Mounting Position.

To use the WRC001 Wireless Camera on your
Android powered smart device, scan the below QR
code, or search: safetycam
Scan here to download App from
Google Play store
Instructions for using the safetycam App:
Choose SONIX device and press confirm.
A full recharge will take approximately 4.5 hours.
To charge the camera, connect the supplied charging
cable to a suitable 5V Power Adaptor. When connected
and charging, a RED LED will illuminate to show charge
in process.
NOTE: If connection between the wireless camera and
the smart device has been successful, you will now
see the camera feed on screen.
1) Once the installation of the app has
occured, open the application on the
smart device.
2) The ON/OFF Button on the camera
can now be pressed to turn the
device on.
3) Once powered on, the blue light on
the front of the camera will illuminate.
Once you have seen the blue light,
and the App is open on your smart
device, the screen on the right will
appear on first use:
Android Platform Instructions Android Platform Instructions
Icons displayed in the App KEY
Wi-Fi set up
Flip image right and left
Click here to take a picture
Saved images
Turn on/ off grid distance lines

To use the WRC001 Wireless Camera on your Apple
iOS powered smart device, scan the below QR code,
or search: safetyeye
Instructions for using the safetyeye App:
NOTE: If connection between the wireless camera and
the smart device has been successful, you will now see
the camera feed on screen.
A full recharge will take approximately 4.5 hours.
To charge the camera, connect the supplied charging
cable to a suitable 5V Power Adaptor. When connected
and charging, a RED LED will illuminate to show charge
in process.
Apple iOS App Store Instructions
Scan here to download App from
Apple iOS App store
1) Once the installation of the app has occured on your
smart device, the ON/OFF Button on the camera can
now be pressed to turn the device on.
2) Once powered on, the blue light on the front of the
camera will illuminate.
Once you have seen the blue light, open the Wi-Fi
settings and locate *SONIX***" to connect to the
Wireless camera. After you have connected, open the
App.
Apple iOS App Store Instructions
Icons displayed in the App KEY
Wi-Fi set up
Flip image right and left
Click here to take a picture
Saved images
Turn on/ off grid distance lines
Mounting Bracket Installation
This camera includes flexible mounting options, and a
user can choose to use either the magnetic mounting
base for simple installation, or the included Velcro for
an installation where magnetic surface is not apparent.
The viewing angle can be altered using the gimbal
screws supplied with the bracket. Simply place the
wireless camera between the bracket arms, and
tighten the gimbal screws until they are secure in the
preferred mounting option.
NOTE: There is an example mounting suggestion on
the rear side of the WRC001 giftbox supplied with the
product.

How to make a claim under your
Express Warranty in Australia
Oricom has a simple warranty process for you to follow:
• Please call or email our Customer Support Team,
02 4574 8888 or [email protected].
• A Customer Support Team member will verify after
troubleshooting with you if your product qualifies under
warranty. If so, they will give you a Product Return
Authorisation number.
• We will then email a Return Authorisation form and a
Repair Notice (if necessary), together with instructions on
how to return the product for warranty service.
Please note that if a Customer Support Team member
advises that your product does not qualify for return, this
warranty does not apply to your product. Products that are
authorised to be returned to Oricom in Australia must
include all of the following:
• A completed Return Authorisation form
• A copy of your Proof of Purchase (please keep your
original copy)
• The faulty product, including all accessories.
Send the approved returns to:
Oricom International Pty Ltd
Locked Bag 658
South Windsor NSW 2756 Australia
Important Information
Repair Notice
Please be aware that the repair of your products may result
in the loss of any user-generated data (such as stored
telephone numbers, text messages and contact
information). Please ensure that you have made a copy of
any data saved on your product before sending for repair.
Please also be aware that products presented for repair
may be replaced by refurbished products or parts of the
same type rather than being repaired.
7 8
must arrange and pay any expenses incurred (including
postage, delivery, freight, transportation or insurance of the
product) to return the faulty product to us, however, we will
arrange delivery of the repaired or replaced faulty product
to you.
Please note that this Express Warranty excludes expenses
incurred by you in returning any faulty product to us. You
Express Warranty (Australia)
This Express Warranty is provided by Oricom International
Pty Ltd ABN 46 086 116 369, Unit 1, 4 Sovereign Place,
South Windsor NSW 2756, herein after referred to as
“Oricom”.
Oricom warrants that the product is free from defects in
materials or workmanship during the Express Warranty
Period. This Express Warranty does not extend to any
product from which the serial number has been removed or
was purchased outside of Australia.

The benefits of this Express Warranty are in addition to
other rights and remedies you may have under the
Australian Consumer Law. Our goods come with
guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or
refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods
fail to be of acceptable quality and the failure does not
amount to a major failure. In the event of a minor failure,
Oricom reserves the right to choose to repair or replace
the product.
9 10
days or for the remainder of the Express Warranty Period
of the Oricom branded product in which they are installed,
whichever is longer. During the Express Warranty Period,
Oricom will where possible repair and if not replace the
faulty product or part thereof. All component parts removed
under this Express Warranty become the property of
Oricom. In the unlikely event that your Oricom product has
a recurring failure, Oricom may always, subject to the
Competition and Consumer Act 2010, at its discretion, elect
to provide you with a replacement product of its choosing
that is at least equivalent to your product in performance.
No change to the conditions of this Express Warranty is
valid unless it is made in writing and signed by an
authorised representative of Oricom.
Oricom will not be liable under this Express Warranty, and
to the extent permitted by law will not be liable for any
defect, loss, damage or injury arising out of or in
connection with a:
• Failure by you to adhere to the warnings and follow the
instructions set out in this user guide for the proper
installation and use of the product;
• Willful misconduct or deliberate misuse by you of the
product;
• Any external cause beyond our control, including but not
limited to power failure, lightning or over voltage; or
• Modification to the product or services carried out on the
product by anyone other than Oricom or Oricom’s
authorised service provider.
The Express Warranty Period will be a period of 12 months
beginning on the date of purchase of the product
evidenced by your dated sales receipt. You are required to
provide proof of purchase as a condition of receiving
Express Warranty services.
You are entitled to a replacement product or repair of the
product at our discretion according to the terms and
conditions of this document if your product is found to be
faulty within the Express Warranty Period. This Express
Warranty extends to the original purchaser only and is not
transferable.
Products distributed by Oricom are manufactured using
new materials or new and used materials equivalent to
new in performance and reliability. Spare parts may be
new or equivalent to new. Spare parts are warranted to be
free from defects in material or workmanship for thirty (30)