Origin Acoustics SUBS10 User manual

SUBS10
SUBS10 SLIM FLOOR-STANDING SUBWOOFER
INSTALLATION MANUAL

2
SUBS10 SUBWOOFER INSTALLATION MANUAL

1. Introduction 1
 2
 3
4. WARNING / IMPORTANT SAFETY INSTRUCTIONS 4
 6
 9
 11
 12
 17
 24
 25
 26
 27

1
SUBS10 SUBWOOFER INSTALLATION MANUAL



          
 






1. Introduction

2
SUBS10 SUBWOOFER INSTALLATION MANUAL
*All product specifications are subject to change. Please refer to the dealer portal for the latest information.
10'' Woven Fiber Glass
35Hz - 175Hz [+/- 3dB]
200 Watts
400 Watts
Aluminum Cabinet





 


15 3/4'' W [400mm]
• Without Feet: 14 9/16'' [370mm]
• With Feet: 15 3/16'' [386mm]
• Without Grille: 3 9/16'' [90mm]
• With Grille: 4 11/16'' [119mm]



 • Crossover
• Phase
• Volume
• RCA line in
• LFE in
• USB input for powering wireless receiver
• Auto On/ Off/ Trigger

3
SUBS10 SUBWOOFER INSTALLATION MANUAL



SCALE:1:5
SUBS10 MOUNT 07-06-2022


1.5”LENGTH
0.57”
WIDTH
1.5”LENGTH
0.57”
WIDTH
1.5”LENGTH
0.57”
WIDTH
1.5”LENGTH
0.57”
WIDTH
1.5” LENGTH
0.31”
WIDTH
1.5” LENGTH
0.31”
WIDTH
1.5” LENGTH
0.31”
WIDTH
1.5” LENGTH
0.31”
WIDTH



 


14.57in
370.0mm
15.75in
400.0mm
SUBS10 GRILLE 07-06-2022
SCALE:1:5


4
SUBS10 SUBWOOFER INSTALLATION MANUAL
4. WARNING:


To reduce the risk of fire, do not cover the ventilation opening of the appliance
with newspapers, tablecloths, curtains, etc, Do not expose the applicance to
naked flame sources (for exmple, lighted candles)
To reduce the risk of fire or electric shock, do not expose this appliance to
dripping or splashing, and do not place objects filled with liquids, such as vases,
on the appliance.
Do not install the appliance in a confined space, such as a bookcase or built-in
cabinet.
As the main plug is used to disconnect the unit from the mains, connect the unit
to an easily accessible AC outlet. Should you notice an abnormality in the unit,
disconnect the main plug from the AC outlet immediately.
The unit is not disconnected from the mains as long as it is connected to the AC
outlet, even if the unit itself has been turned o.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions
2. Keep these instructions
3. Heed all warnings
4. Follow all instructions
5. Do not use apparatus near water
6. Clean only with dry cloth
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions
8. Do not install near heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat or are combustible
sources

5
SUBS10 SUBWOOFER INSTALLATION MANUAL
32
DEEP COLLECTION™ INSTALLATION USER MANUAL DEEP COLLECTION™ INSTALLATION USER MANUAL
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not t into your outlet, consult an electrician
for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods
of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
15. Do not expose this apparatus to dripping or splashing and ensure that no
objects lled with liquids, such as vases, are placed on the apparatus.
16. To completely disconnect this apparatus from the AC Mains, disconnect the
power supply cord plug from the AC receptacle.
17. The main plug of the power supply cord shall remain readily operable.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER OR BACK. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO AUTHO-RIZED
SERVICE PERSONNEL.
CAUTION:
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE. THE APPLIANCE SHALL NOT BE
EXPOSED TO DRIPPING OR SPLASHING. NO
OBJECTS FILLED WITH LIQUIDS SHALL BE
PLACED ON THE APPLIANCE.
The lightning ash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of suicient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
32
DEEP COLLECTION™ INSTALLATION USER MANUAL DEEP COLLECTION™ INSTALLATION USER MANUAL
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not t into your outlet, consult an electrician
for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods
of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
15. Do not expose this apparatus to dripping or splashing and ensure that no
objects lled with liquids, such as vases, are placed on the apparatus.
16. To completely disconnect this apparatus from the AC Mains, disconnect the
power supply cord plug from the AC receptacle.
17. The main plug of the power supply cord shall remain readily operable.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER OR BACK. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO AUTHO-RIZED
SERVICE PERSONNEL.
CAUTION:
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE. THE APPLIANCE SHALL NOT BE
EXPOSED TO DRIPPING OR SPLASHING. NO
OBJECTS FILLED WITH LIQUIDS SHALL BE
PLACED ON THE APPLIANCE.
The lightning ash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of suicient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
9. Do not defeat the safety purpose of polarized or grounding type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding plug. The wide blade or the third
prong are provided for you safety. If the plug does not fit into your outlet, consult
an electrician for replacement or the obsolete outlet.
10. Protect the power plug from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only user attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, or table specified by the manufacturer or
sold with the apparatus. When a cart is used, use caution when moving the car/
apparatus combination to avoid injury form tipping over.
13. Uplug this apparatus during lightning storms or when unused for
period of times.
Important Symbols: The lighting flash arrowhead triangular symbol is to alert
the user to the presence of uninsulated ‘dangerous voltage’ within the product
suicient enough to constitute a risk of electric shock.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus had been damaged, liquid had been damaged in any way, such as
power supply cord or plug id damaged, liquid had been dropped or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally or has been dropped.
15. The equipment shall be used at a maximum temperature of 35 degrees
Celsius ambient temperature.
16. Do not open the equipment to reduce the risk of electric shock. For safety
reasons it is only allowed to be opened by a qualified service person.

6
SUBS10 SUBWOOFER INSTALLATION MANUAL













 




7
SUBS10 SUBWOOFER INSTALLATION MANUAL













8
SUBS10 SUBWOOFER INSTALLATION MANUAL








9
SUBS10 SUBWOOFER INSTALLATION MANUAL

 - Switch between On/O.
- This connection is a standard IEC power jack. Use the
supplied 90 Degree AC Power Cord to connect the subwoofer to an available and
easily accessible AC outlet.
 - Additional fuse included for servicing.
 - This switch functions only when the Power Switch
is set to “On.” When the Power Switch is set to “On,” and when this switch is set
to “Auto,” the subwoofer’s power will come on automatically, when it senses an
incoming audio signal. If there is no signal for , the subwoofer will then
automatically go into Stand-by.
When the switch is set to “Trigger,” it will power on when it gets a 12V signal from
the 12V Trigger Input.
- When the switch is set to LFE/NAX, the Crossover
Knob will not work, and it will play according to the crossover that was set up in
the AV Receiver.
When Crossover is selected, you can adjust the crossover point using the Crossover
Knob.
- Switches the Polarity of the speaker from 0 - 180 Degrees.
Use this knob to set the highest bass frequency the subwoofer
will play, from 50 to 175 Hz. If the subwoofer is installed in a stereo system, set this
knob as close as possible to the lowest rated bass extension of the main le and
right speakers.
Note: For the Crossover Knob to work and adjust the the Crossover Frequency, the
Crossover Switch must also be engaged.

10
SUBS10 SUBWOOFER INSTALLATION MANUAL
 - This knob adjusts the subwoofer’s volume. Turn it clockwise for
full volume. Note that the subwoofer level control in an AV Receiver will also aect
how loud the subwoofer plays. With most AV Receivers, setting this knob at about
halfway up (the 12 o’clock position) will provide a volume level that allows the
subwoofer’s level to be matched with that of the main speakers.
– Red : STAND BY • No Light : OFF • White : ON
A White light indicates the subwoofer is powered on.
      - Use the 90 Degree USB Dongle to power the
WSK200 Wireless Transmission Kit by the Subwoofer, through a USB cable to the
5V/ 500 mA power supply.

: Connects the LFE output connection of your AV Receiver or
Pre-Amp Processor. Use the included 90 Degree RCA Cable.
: Connects the le and right female RCA input to the le and
right from output connections on an AV Receiver or Pre-Amp Processor. Use the
included 90 Degree RCA Cable.

: Connects additional amplifiers.
 - Turns on the amp when a 12V signal is received from another 12V
trigger device.
 - If you are placing the Subwoofer
in a Standing Position, place the 2 included Standing Feet directly below the le
and right double white line indicators, for a balanced and stable placement.

11
SUBS10 SUBWOOFER INSTALLATION MANUAL


SWITCHED OUTLET
AV RECEIVER
CEN
SUB
RS
LSL
R
OUT
 All connections and switching must be done with the amplifier
turned o. Connect the power cord last to ensure that the amplifier is o during
all the connections and set up.


SWITCHED OUTLET
AV RECEIVER
CEN
SUB
RS
LSL
R
OUT






Single Sub Connection


SWITCHED OUTLET
AV RECEIVER
CEN
SUB
RS
LSL
R
OUT










LFE SUB OUT


SWITCHED OUTLET
AV RECEIVER
CEN
SUB
RS
LSL
R
OUT

Single Sub Connection


SWITCHED OUTLET
AV RECEIVER
CEN
SUB
RS
LSL
R
OUT

12
SUBS10 SUBWOOFER INSTALLATION MANUAL

Connect the 12V trigger output of another device to the 12V trigger input of the
amplifier using a high quality mono cable.
Connect the appropriate conductor to each screw terminal, observing correct
polarity.
Use  12 V Triger Output

Please using Origin Acoustics WSK200 (Seperate Purchase) to connect the SUBS10
Subwoofer to a line-level source. Either LFE or Line Level can be selected, but only
one is suicient.


AV RECEIVER
CEN
SUB
RS
LSL
R
OUT



LFE SUB OUT


SWITCHED OUTLET
AV RECEIVER
CEN
SUB
RS
LSL
R
OUT


AV RECEIVER
CEN
SUB
RS
LSL
R
OUT



13
SUBS10 SUBWOOFER INSTALLATION MANUAL

Receiver











What You Will Need
• Powered Subwoofer


Wireless Subwoofer Kit Components





Transmitter












14
SUBS10 SUBWOOFER INSTALLATION MANUAL
General Placement and Setup Tips






R
L
LINE IN
LFE/NAX
LINE OUT
WIRELESS RECEIVER
WIRELESS RECEIVER
DC 5V /500mA
MIN MAX
CROSSOVER
50 175
USB 5V INPUT
RCA TO MINI JACK CABLE (INCLUDED)
MINI JACK
VOLUME
R
L
LINE IN
LFE/NAX
LINE OUT
WIRELESS RECEIVER
WIRELESS RECEIVER
DC 5V /500mA
MIN MAX
CROSSOVER
50 175
USB 5V INPUT
RCA TO MINI JACK CABLE (INCLUDED)
MINI JACK
VOLUME

15
SUBS10 SUBWOOFER INSTALLATION MANUAL

1.



2.

3.


1.

2.

3. 

1.


2. 


3. 



16
SUBS10 SUBWOOFER INSTALLATION MANUAL

1. 

2.

3.

4. 

5.

6


17
SUBS10 SUBWOOFER INSTALLATION MANUAL


Unbox the Subwoofer and set box and packing material aside. Turn o the entire
audio system before making any connections. If it will be mounted, take care to
ensure the Subwoofer is mounted securely into its mount.

1. 

on the Woofer Side of the unit.
2.

3. 


standing feet install grille with rubber feet install rubber feet install - no grille
screw post holes : back side
extras
extras
extras
screw holes WITHOUT pre-installed screw posts : front side
front side WITH pre-installed screw posts
front side WITH pre-installed screw posts screw post holes : back side
3D view- PNG




standing feet install grille with rubber feet install rubber feet install - no grille
screw post holes : back side
extras
extras
extras
screw holes WITHOUT pre-installed screw posts : front side
front side WITH pre-installed screw posts
front side WITH pre-installed screw posts screw post holes : back side
3D view- PNG
standing feet install grille with rubber feet install rubber feet install - no grille
screw post holes : back side
extras
extras
extras
screw holes WITHOUT pre-installed screw posts : front side
front side WITH pre-installed screw posts
front side WITH pre-installed screw posts screw post holes : back side
3D view- PNG
standing feet install grille with rubber feet install rubber feet install - no grille
screw post holes : back side
extras
extras
extras
screw holes WITHOUT pre-installed screw posts : front side
front side WITH pre-installed screw posts
front side WITH pre-installed screw posts screw post holes : back side
3D view- PNG
standing feet install grille with rubber feet install rubber feet install - no grille
screw post holes : back side
extras
extras
extras
screw holes WITHOUT pre-installed screw posts : front side
front side WITH pre-installed screw posts
front side WITH pre-installed screw posts screw post holes : back side
3D view- PNG
standing feet install grille with rubber feet install rubber feet install - no grille
screw post holes : back side
extras extras
extras
screw holes WITHOUT pre-installed screw posts : front side
front side WITH pre-installed screw posts
front side WITH pre-installed screw posts screw post holes : back side
3D view- PNG
standing feet install grille with rubber feet install rubber feet install - no grille
screw post holes : back side
extras
extras
extras
screw holes WITHOUT pre-installed screw posts : front side
front side WITH pre-installed screw posts
front side WITH pre-installed screw posts screw post holes : back side
3D view- PNG
standing feet install grille with rubber feet install rubber feet install - no grille
screw post holes : back side
extras
extras
extras
screw holes WITHOUT pre-installed screw posts : front side
front side WITH pre-installed screw posts
front side WITH pre-installed screw posts screw post holes : back side
3D view- PNG

18
SUBS10 SUBWOOFER INSTALLATION MANUAL
standing feet install grille with rubber feet install rubber feet install - no grille
screw post holes : back side
extras
extras
extras
screw holes WITHOUT pre-installed screw posts : front side
front side WITH pre-installed screw posts
front side WITH pre-installed screw posts screw post holes : back side
3D view- PNG

1. 

2.

3.

4. 

5.

standing feet install grille with rubber feet install rubber feet install - no grille
screw post holes : back side
extras
extras
extras
screw holes WITHOUT pre-installed screw posts : front side
front side WITH pre-installed screw posts
front side WITH pre-installed screw posts screw post holes : back side
3D view- PNG









standing feet install grille with rubber feet install rubber feet install - no grille
screw post holes : back side
extras
extras
extras
screw holes WITHOUT pre-installed screw posts : front side
front side WITH pre-installed screw posts
front side WITH pre-installed screw posts screw post holes : back side
3D view- PNG
standing feet install grille with rubber feet install rubber feet install - no grille
screw post holes : back side
extras
extras
extras
screw holes WITHOUT pre-installed screw posts : front side
front side WITH pre-installed screw posts
front side WITH pre-installed screw posts screw post holes : back side
3D view- PNG
standing feet install grille with rubber feet install rubber feet install - no grille
screw post holes : back side
extras
extras
extras
screw holes WITHOUT pre-installed screw posts : front side
front side WITH pre-installed screw posts
front side WITH pre-installed screw posts screw post holes : back side
3D view- PNG
standing feet install grille with rubber feet install rubber feet install - no grille
screw post holes : back side
extras
extras
extras
screw holes WITHOUT pre-installed screw posts : front side
front side WITH pre-installed screw posts
front side WITH pre-installed screw posts screw post holes : back side
3D view- PNG
standing feet install grille with rubber feet install rubber feet install - no grille
screw post holes : back side
extras
extras
extras
screw holes WITHOUT pre-installed screw posts : front side
front side WITH pre-installed screw posts
front side WITH pre-installed screw posts screw post holes : back side
3D view- PNG
standing feet install grille with rubber feet install rubber feet install - no grille
screw post holes : back side
extras
extras
extras
screw holes WITHOUT pre-installed screw posts : front side
front side WITH pre-installed screw posts
front side WITH pre-installed screw posts screw post holes : back side
3D view- PNG
standing feet install grille with rubber feet install rubber feet install - no grille
screw post holes : back side
extras
extras
extras
screw holes WITHOUT pre-installed screw posts : front side
front side WITH pre-installed screw posts
front side WITH pre-installed screw posts screw post holes : back side
3D view- PNG
standing feet install grille with rubber feet install rubber feet install - no grille
screw post holes : back side
extras
extras
extras
screw holes WITHOUT pre-installed screw posts : front side
front side WITH pre-installed screw posts
front side WITH pre-installed screw posts screw post holes : back side
3D view- PNG
standing feet install grille with rubber feet install rubber feet install - no grille
screw post holes : back side
extras
extras
extras
screw holes WITHOUT pre-installed screw posts : front side
front side WITH pre-installed screw posts
front side WITH pre-installed screw posts screw post holes : back side
3D view- PNG
standing feet install grille with rubber feet install rubber feet install - no grille
screw post holes : back side
extras
extras
extras
screw holes WITHOUT pre-installed screw posts : front side
front side WITH pre-installed screw posts
front side WITH pre-installed screw posts screw post holes : back side
3D view- PNG
standing feet install grille with rubber feet install rubber feet install - no grille
screw post holes : back side
extras
extras
extras
screw holes WITHOUT pre-installed screw posts : front side
front side WITH pre-installed screw posts
front side WITH pre-installed screw posts screw post holes : back side
3D view- PNG