ORION PDP MIS-4201 User manual

A revolutionary multi PDP
Infinitely expandable multi PDP
Thank you for your purchasing our Multi-PDP.
Please read through this user's manual for safety before installing this product.
This product is manufactured for Multi Plasma display model only.
Multi-PDP User’s Manual
Multi-PDP

1 2
Infinitely expandable Multi-PDP
If you fail to comply with the regulations for safely
and proper use, fire or injury may be caused.
Warning
Features of Multi-PDP
You can enjoy a wide full-flat screen with high brightness and high quality.
It is installable and movable anywhere thanks to its thin shape.
You can enjoy your favorite programs with various screen-split features
simultaneously presenting several programs.
Thank you for your purchasing our Multi-PDP monitor.
This manual describes how to use the product and notes in use.
Please read the manual carefully before using it.
After reading the manual, keep it with the certificate for you to refer to it
whenever you need.
If you have any question or any problem occurs, please contact to the
provider or the A/S center immediately.
Pausing static picture for around 3 hours may cause an afterimage effect.
Notice of users
A-grade device
It is a device designed for business purpose with a safety certificate for electromagnetic
interference, which user should be mindful of.
Contents
User’s Manual Multi-Screen Control
System(MSCS)
Power Cable
Guide Pin(4pcs)
RS232 CablePC Cable
1. How to keep safely 3~4
2. How to install
How to move Multi-PDP (short distance) 5
How to move Multi-PDP (long distance) 5
Stand type 6
Wall type 7
3. Guidance for Users 8
Input/Output Terminals 9
Set ID Switch Setting 10
4. How to connect cables
4.1. Connection of one set Multi-PDP
PC & DVI Connection 11
VCR Connection 13
DVD & DTV Connection 15
4.2. Connection of M x N Multi-PDP 17~18
4.3. Connection of 3 x 3 Multi-PDP 19
4.4. Setting ID of M x N Multi-PDP 20
5. Setting and operation of MSCS
5.1 Set ‘Com Port’ for Communication 21
5.2 Set ‘Multi Screen’ 22
5.3 Configure diverse screens 23
5.4 Set several screens at a time 24
5.5 Use PDP Control 25
5.6 Slider Control 26~27
5.7 Image Adjustment - Graphics & Video 28
5.8 Orion PDP HOME PAGE 29
6. Other tips
6.1 Before considering as a failure 30
6.2 About Plasma display panel 31
7. Resolution of PC & Video signal
7.1 DVD/DTV 32
7.2 PC & DVI 32
8. Specifications 33

3 4
Infinitely expandable Multi-PDP
1. HOW TO KEEP SAFELY
If it operates abnormally, stop using it
immediately.
Do not place any liquid-containing
container on it. If the inside is wet, it
may cause electric shock or fire.
Do not put any foreign material into the
product. It may cause a failure or
shorten the life span.
Please refer to a specialized
construction company for installing
stand or wall mount unit. Otherwise,
damage or injury may be caused.
Do not touch the device when lightning
strikes. Otherwise, electric shock can
be caused.
Do not install it at unstable place.
It may cause injury.
Avoid any action to damage the power
code or power plug. It may cause fire
or electric shock.
Do not pull out the power plug with a
wet hand. It may cause electric shock.
Do not use exceeding ratings of outlet
or extension cords. It may cause
failure.
Do not alter (or disassemble) the
product. It may cause electric shock
since high voltage is flowing inside.
Do not install the product at any place
exposed to direct ray of light or near
any heating device. It may shorten
product’s life span or cause failure.
Make sure the product is not covered with
any object. If the venting hole is blocked,
the inside temperature may rise to cause
overheating resulting in fire.
Do not pull out or hang down the
connection cable. It may damage the
cord to cause fire or electric shock.
Do not lean against the product or keep
it leaned. It may cause injury or failure.
Do not put it at any place with much
humidity, dust, oil, smoke or steam. It
may cause failure.
Pull out the power plug by holding the
plug. Otherwise, it may damage the
power cord to cause fire or electric
shock.
If you do not want to use the product for
a long time, keep the power plug
unplugged to save the electricity.
Do not put any heavy object on it.
It may cause failure.
Do not ride or step on the product It may
cause breakage when fallen down.
When moving it, disconnect the
connecting cable. Otherwise, it may
damage the cable to cause fire or
electric shock.
Install the product on safe and flat
surface.
Do not put candles on the product. If the
liquid flows inside the product. It may
cause electric shock or fire.
Do not touch product’s front surface
with hand. Otherwise, the image quality
can be lowered.

5 6
Infinitely expandable Multi-PDP
2. HOW TO INSTALL
How to move Multi-PDP (short distance)
• The set is installable in diverse ways such as on a wall, or stand etc.
• Install this set only at a location where adequate ventilation is available.
• This set is designed to be mounted either horizontally or vertically.
1. 2 people hold each handle on product’s
back side
2 people transfer the product with holding the
handle and the front part at the same time.
How to move Multi-PDP (long distance)
Attach the transfer gripe to each side of the
product.
Transfer gripe
Handles
2 people move the product with holding the
gripe at the same time.
Install on a Stand
Pedestal mount allowing minimum clearance for adequate ventilation.
STAND TYPE (OPTIONAL)
• The set can be installed as shown below. (For further information, refer to the optional 'Stand
Installation and Setup Guide'.)
Hanger Bolt
PDP
Stand Stand
Attention
Do not incline the panel forward.
PANEL PANEL
PANEL
Guide Pin

7 8
Infinitely expandable Multi-PDP
WALL TYPE (OPTIONAL)
• The set can be installed on the wall as shown below.
(For further information, refer to the optional ‘Wall Mounting Bracket Installation and Setup Guide'.)
Mount on the wall
Wall mount allowing minimum clearance for adequate ventilation.
3. Guidance for Users
Front view
Back view
DVI-DOUT
RS-232CINRS-232COUT
DVI-DIN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
ACINPUT
Hanger Bolt
PDP
Hanger
Hanger
Guide Pin

910
Infinitely expandable Multi-PDP
Input/Output Terminals Set ID Switch Setting
DVI-DOUT
RS-232CINRS-232COUT
DVI-DIN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
ACINPUT
DVI-DOUT
RS-232CINRS-232COUT
DVI-DIN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
ACINPUT
1. RS-232C
Multi-PDP Control, Firmware Upgrade, 9pin D-sub
2.Video
Composite Signal
NTSC, PAL, SECAM
3.S-Video
S-Video Signal
NTSC, PAL, SECAM, 4pin Mini Din
4.Component
DVD Signal
DTV - YPbPr Signal
5. PC
Computer RGB Analog Signal, D-sub 15pin
6. DVI-D
TMDS Signal
7. ID Switch
Set ID Switch
8. AC Input
Pr
Pb
Y
• Example of switch
- This is Dyadic System. In case of PDP set ID 1 and ID 9, set the ID switch as shown in the
below figure
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
[PDP ID 1] [PDP ID 9]
ON ON

11 12
Infinitely expandable Multi-PDP
4. How to Connect Cables
4.1. Connection of one set multi-PDP
PC & DVI Connection
• MSCS (Multi-Screen Control System) that we supply and RS-232C of PDP monitor can
control all functions of Multi-PDP, such as On/Off and screen control.
• To control Multi-PDP through PC, the Identity number of each Multi-PDP and that of
MSCS should be identical.
• RS-232C of each Multi-PDP and PC should be connected.
DVI-D OUT
RS-232C INRS-232C OUT
DVI-D IN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
DVI-DOUT
RS-232CINRS-232COUT
DVI-DIN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
ACINPUT
123 4 5 6 7 8
Pr
Pb
Y
1 2 3 4 5 6 7 8
PC (MSCS) to control Multi-PDP
PC
RS-232C COM1
When connecting to DVI
When connecting to PC-ANALOG
1 2 3 4 5 6 7 8

13 14
Infinitely expandable Multi-PDP
1 2 3 4 5 6 7 8
DVI-D OUT
RS-232C INRS-232C OUT
DVI-D IN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
DVI-DOUT
RS-232CINRS-232COUT
DVI-DIN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
ACINPUT
123 4 5 6 7 8
Pr
Pb
Y
VCR Connection
PC(MSCS) to control Multi-PDP
VCR
RS-232C COM1
When connecting to S-Video
When connecting to Video
1 2 3 4 5 6 7 8

15 16
Infinitely expandable Multi-PDP
DVI-D OUT
RS-232C INRS-232C OUT
DVI-D IN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
DVI-DOUT
RS-232CINRS-232COUT
DVI-DIN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
ACINPUT
123 4 5 6 7 8
Pr
Pb
Y
1 2 3 4 5 6 7 8
DVD & DTV Connection
PC(MSCS) to control Multi-PDP
DVD & DTV
RS-232C COM1
When connecting to Component
•Component Input ports
You can get better image quality by
connecting DVD player to component input
ports as below.
Component ports of
the set Y Pb Pr
Video output ports
of DVD player
YPbPr
Y B-Y R-Y
YCbCr
1 2 3 4 5 6 7 8

17 18
Infinitely expandable Multi-PDP
4.2. Connection of M x N Multi-PDP
DVI-D OUT
RS-232C INRS-232C OUT
DVI-D IN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
DVI-D OUT
RS-232C INRS-232C OUT
DVI-D IN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
DVI-D OUT
RS-232C INRS-232C OUT
DVI-D IN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
DVI-D OUT
RS-232C INRS-232C OUT
DVI-D IN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
Pr
Pb
Y
1 2 3 4 5 6 7 8
DVI-D OUT
RS-232C INRS-232C OUT
DVI-D IN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
Pr
Pb
Y
1 2 3 4 5 6 7 8
DVI-D OUT
RS-232C INRS-232C OUT
DVI-D IN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
Pr
Pb
Y
1 2 3 4 5 6 7 8
DVI-D OUT
RS-232C INRS-232C OUT
DVI-D IN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
Pr
Pb
Y
1 2 3 4 5 6 7 8
DVI-D OUT
RS-232C INRS-232C OUT
DVI-D IN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
Pr
Pb
Y
1 2 3 4 5 6 7 8
Pr
Pb
Y
1 2 3 4 5 6 7 8
Pr
Pb
Y
1 2 3 4 5 6 7 8
Pr
Pb
Y
1 2 3 4 5 6 7 8
RS-232C COM1
S-VIDEO
PDP1 PDP2 PDP3 PDP4 PDP5 PDP6 PDP7 PDP8
PC (MSCS) to control Multi-PDP
PC
DVI-DOUT
RS-232CINRS-232COUT
DVI-DIN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
ACINPUT
1234 5 6 7 8
DVI-DOUT
RS-232CINRS-232COUT
DVI-DIN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
ACINPUT
1234 5 6 7 8
DVI-DOUT
RS-232CINRS-232COUT
DVI-DIN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
ACINPUT
1234 5 6 7 8
DVI-DOUT
RS-232CINRS-232COUT
DVI-DIN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
ACINPUT
1234 5 6 7 8
DVI-DOUT
RS-232CINRS-232COUT
DVI-DIN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
ACINPUT
1234 5 6 7 8
DVI-DOUT
RS-232CINRS-232COUT
DVI-DIN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
ACINPUT
1234 5 6 7 8
DVI-DOUT
RS-232CINRS-232COUT
DVI-DIN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
ACINPUT
1234 5 6 7 8
DVI-DOUT
RS-232CINRS-232COUT
DVI-DIN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
ACINPUT
1234 5 6 7 8
DVI-DOUT
RS-232CINRS-232COUT
DVI-DIN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
ACINPUT
1234 5 6 7 8
• When connecting a number of Multi-PDP through Daisy Chain(Link), surrounding noise may
come out to lower the image quality.
• In case of lower image quality, it is advisable to use a distributor that can provide resolution over
UXGA (1600*1200 @ 60Hz).

19 20
Infinitely expandable Multi-PDP
4.4. Setting ID of M x N Multi-PDP
• Identity number (ID) indicates the location of each Multi-PDP.
• When you look at the Multi-PDP screens in front of Multi-PDP.
PDP ID
1
PDP ID
2
PDP ID
3
PDP ID
4
PDP ID
5
PDP ID
6
PDP ID
7
PDP ID
8
PDP ID
9
PDP ID
10
PDP ID
11
PDP ID
12
PDP ID
13
PDP ID
14
PDP ID
15
PDP ID
16
PDP ID
17
PDP ID
18
PDP ID
19
PDP ID
20
PDP ID
21
PDP ID
22
PDP ID
23
PDP ID
24
PDP ID
25
Recommended ID of M x N screens
ID 1 ID 2 ID 3 ID 4 ID 5
ID 6 ID 7 ID 8 ID 9 ID 10
ID 11 ID 12 ID 13 ID 14 ID 15
ID 16 ID 17 ID 18 ID 19 ID 20
ID 21 ID 22 ID 23 ID 24 ID 25
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
4.3. Connection of 3 x 3 Multi-PDP
PC
IN OUT
RS-232C INRS-232C OUT
ID 1
PC
IN OUT
RS-232C INRS-232C OUT
ID 4
PC
IN OUT
RS-232C INRS-232C OUT
ID 7
PC
IN OUT
RS-232C INRS-232C OUT
ID 2
PC
IN OUT
RS-232C INRS-232C OUT
ID 5
PC
IN OUT
RS-232C INRS-232C OUT
ID 8
PC
IN OUT
RS-232C INRS-232C OUT
ID 3
PC
IN OUT
RS-232C INRS-232C OUT
ID 6
PC
IN OUT
RS-232C INRS-232C OUT
ID 9
RS-232C control PC PC
PC Signal Distributor
(UXGA : over 250MHz)

21 22
Infinitely expandable Multi-PDP
5.2 Set ‘Multi-Screen’
Select total number of connected Multi-PDP sets.
-In case the number is 9, set the Total Screen at “9”.
Select an arrangement way in ‘Select M X N’
-Select a desirable arrangement way among 1*9, 3*3, and 9*1. (The arrangement
way is displayed depending on the total number of connections.)
Select the Input Source, and press the Play button .
-Select a connected external Input Source, and press the ‘Play’ button.
-The overall screen is played on the selected external unit if pressing the “Play”
button.
Set Multi Screen
1
2
3
5.1 Set ‘Com Port’ for Communication
• Connect Multi-PDP RS-232C and PC Com Port
• Port is available from Com1 to Com5.
• Make sure that Baud Rate is set at 115200.
• When ‘PORT’ and ‘Baud Rate’ is set, click “Connect”.
MSCS (Multi-Screen Control System) Main Image
Com Port Setting
5. Setting and operation of MSCS
• Activate MSCS.exe file.

2423
Select a desirable Input Source in “Select input”.
-Select a desirable ‘DVI’ in “Select Input”
Click a desirable screen in “Screen Configuration”
-Left-click and drag on a start screen
The screen is divided for display.
-The selected screen will be displayed in DVI.
1
2
Infinitely expandable Multi-PDP
3
5.4 Set several screens at a time
• You can configure diverse screens as you want.
Select a desirable Input Source in “Select Input”
Ex) Select “DVI” in “Select Input”
Click a desirable screen in ‘Screen Configuration’.
-Left-click a screen which should be converted to DVI.
-The screen you selected will be changed into DVI.
You can configure other screens in the same way.
-Selected screen will be displayed in DVD.
1
2
3
5.3 Configure diverse screens
• You can configure diverse screens as you want.

25 26
Infinitely expandable Multi-PDP
5.6 Slide Control
• Set the slide show list as you want. It can be repeated.
Select a desirable screen arrangement in Screen Configurations.
-Select a desirable screen arrangement and input source.
Input playing time in Slide Control.
-Input display time and save the data by pressing the Add button.
Save diverse screen arrangements in the same way.
-Set diverse types of display screen.
1
2
3
•
If pressing the Auto Tracking Set button, the Input Source executes command only in PC.
-After operating Auto Tracking Set command, If alignment does not fit, give Auto Tracking
Detail command to control Frequency, Phase, Line Start Pixel Start in detail.
Adjusting steps are as follows;
1) Adjust “Phase” until you can have clear vertical lines.
2) After adjusting “Phase”, adjust “Linestart” to fit vertical alignment, “Pixelstart” for horizontal
alignment.
3) Adjust “Frequency”, if you still have wrong alignment.
If you adjust “Frequency”, repeat step 1) and 2) to fit alignment.
-The range where you can adjust is from -50 to 50.
• The Selected PDP ID indicates activated PDP ID in Screen Configuration
(red rectangular area)
5.5 Use “PDP Control”
• Transmit PDP Control Data to selected ID of M-PDP.
• If checking ‘all M-PDP” box, the Data will be sent to all connected M-PDP, disregarding PDP ID.

27 28
Infinitely expandable Multi-PDP
5.7 Image Adjustment - Graphics & Video
• All M-PDP command is executable only in the User Mode and Test Pattern.
• Press the Red, White, Green, Black or Blue button to activate the Test Pattern as an
internal pattern.
• Press the Black button to end the internal pattern. The test pattern is activated as
preset, even after powering off and on again.
• You can save adjusted values in each mode into the hard disk by pressing the Save
button. In case data is deleted by mistake during adjustment, you can call up the
saved file by pressing the Lode button.
Select a Input source for image adjustment.
-Select a PC to control PC screen.
-Click the White Balance button.
Graphic & Video Dialog is displayed.
-You can adjust the image on the below screen.
Press the Reset button to initialize all Image Adjustment values.
1
2
3
• Delete: Select a Slideshow that you want to delete and click Delete.
• Delete ALL: Delete all slide shows.
• Delay Time: Time gap between slide shows.
-The time gap is selectable from 10 seconds to 59 minutes and 59 seconds
-When pressing the Start button, the saved screen arrangement is automatically
displayed for preset time.
When checking the Repeat Slide box, the display is repeated unless
pressing the Stop button.
Press the Stop button to discontinue the Slide.
4
5
6

29 30
Infinitely expandable Multi-PDP
6.1 Before considering as a failure
Before calling for any repair, check the following and then refer to a near A/S center.
6. Other tips
“Tick” sound from the main body.
If there is no problem with the screen or sound, the “tick” sound is likely
to result from the cabinet lightly shrinking with the change of room
temperature. The sound does not affect product’s performance.
No image at upper and bottom part of the screen.
As for a screen which is over 16:9 in width (such as cinema-sized one),
no image may be displayed at upper and bottom part of the screen.
Speckles or white lines on the screen
Check whether the problem is caused by vehicle, streetcar, high-
voltage cable or neon sign, which emitting interference wave or
electromagnetic induction. Avoid any interfering object.
Screen size can be changed.
The screen size may be fitted to the first dark scene depending on
contents.
5.8 Orion PDP HOME PAGE
• If you are in connection with the Internet, you can reach our URL clicking Help and Orion
PDP Home Page.
Orion PDP HOME PAGE

31 32
Infinitely expandable Multi-PDP
7. Resolution of PC video signal
Resolution Aspect Ratio
480i 720 x 480 16:9
480p 720 x 480 16:9
576i 720 x 576 16:9
720p 1280 x 720 16:9
1080i 1920 x 1080 16:9
Resolution V-Freq. (Hz) H-Freq. (KHz) Remarks
640x350 85 37.86
640 x 480
60 31.47
72 37.86
75 37.50
85 43.27
800 x 600
56 35.16
60 37.88
72 48.08
75 46.88
85 53.67
1024 x 768
60 48.36
70 56.48
75 60.03
85 68.68
1152 x 864 75 67.50
1280 x 960 60 60.00
1280 x 1024 60 63.98
1600 x 1200 60 75.00
7.1 DVD/DTV
7.2 PC & DVI
6.2 About Plasma display panel
The followings are phenomena caused by characteristics of the plasma display panel.
Since it is not any failure, you may use it at rest.
Black or twinkling spots on the screen
Although the plasma display panel is manufactured with high-precision
technology, there may exist black or twinkling spots on the screen.
Since it is not any failure, you may use it at rest.
Afterimage
When you keep static image still for around 3 hours, an afterimage
may occur. In this case, the afterimage can be slowly removed when
operating the screen with full white test pattern.(refer to page 28)
Noise from the inside
When you turn on the product, driving sound may be heard from the
display panel. Since it is not any failure, you may use it at rest.

33 34
Infinitely expandable Multi-PDP
memo
8. Specifications
Product name MIS-4201
Power supply 100 ~ 240V AC. 50/60Hz
Power consumption
Max 400W
Plasma display panel 42inch, 16:9 aspect ratio
Contrast ratio 3,000 :1 (Dark room)
Brightness 1,000 cd/m2(w/o Film)
Front filter Low reflection coating film
Number of pixels 853W X 480H Pixels
Seam gap (In case of multi formation) 5mm
Environmental condition
Temperature 0°C~ 35°C
Humidity 20% ~ 70%
Signal
Video signal NTSC, PAL, SECAM,
PC signal VGA, SVG A, XGA, SXGA, UXGA
Frequency Horizontal Frequency 15.5 ~75kHz
Vertical Frequency 50~ 75Hz
Connectors Input Output
Video CVBS : BNC
S-Video : DIN 4pin
Component Y, Pb, Pr : BNC Same as left side
PC PC RGB : D-Sub 15pin
DVI TMDS : DVI-D 24pin
Serial RS-232C D-sub 9pin(female) RS-232C D-sub 9pin (male)
Option Stand, Wall Mounting Bracket , Signal Cable
External dimension 926.2mm[W] X 523.6mm[H] X76.5mm[D]
Weight 27 kg
DVI-DOUT
RS-232CINRS-232COUT
DVI-DIN
VIDEO
IN OUT
S-VIDEO
IN OUT
PC
IN OUT
COMPONENT
IN OUT
ACINPUT
1234 5 6 7 8
926.2 76.5 528.9
523.6 336.0
93.8
93.8