Otic HJ09JRB01 User manual

MODEL: HJ09JRB01
PLEASE READ CAREFULLY BEFORE OPERATING THIS EQUIPMENT
KEEP IT IN A SAFE PLACE FOR FUTURE REFERENCE
9 INCH PROTABLE DVD/CD
PLAYER

2
CONTENTS
Important Safety Information............................................................................................................3-8
About Discs....................................................................................................................................9
Location of Controls..............................................................................................................10-11
Remote Control............................................................................................................................12
Making Connections .............................................................................................................13-14
Swivel Panel................................................................................................................................ 15
General Operations...............................................................................................................16-17
USB or Card Playback................................................................................................................18
Other Way to Play........................................................................................................................19
Bluetooth Transmitter Operation.........................................................................................20-22
Remote Control Operation...................................................................................................23-24
System Setup..........................................................................................................................25-27
Troubleshooting....................................................................................................................................28
Region-free Guide.......................................................................................................................29
Care and Maintenance................................................................................................................30
Specification.................................................................................................................................. ..31
Accessories...................................................................................................................................31
Mounting Strap Usage Guide......................................................................................................32

3
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION:
THIS DIGITAL VIDEO DISC PLYER
EMPLOYS A LASER SYSTEM.
TO ENSURE PROPER USE OF THIS
PRODUCT.
PLEASE READ THIS OWNER`S
MANUAL CAREFULLY AND RETAIN
FOR FUTURE REFERENCE.
SHOULD THE UNIT REQUIRE
MAINTENANCE, CONTACT AN
AUTHORIZED SERVICE LOCATION
SEE SERVICE PROCEDURE.
USE CONTROLS, ADJUSTMENTS
OR THE PERFORMANCE OF
PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO
LASER BEAM, DO NOT TRY TO OPEN
THE ENCLOSURE. VISIBLE LASER
RADIATION MAY BE PRESENT WHEN
THE ENCLOSURE IS OPENED. DO NOT
STARE INTO BEAM.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR
MOISTURE.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE THE
RECOMMENDED ACCESSORIES
ONLY.
SURGE PROTECTORS:
It is recommended to use a surge
protector for AC connection. Lightning
and power surges ARE NOT covered
under warranty for this product.
The lightning fl ash with
arrowhead symbol within an
equilateral triangle is intended
to alert the user to the presence of
uninsulated dangerous voltage within
the product`s enclosure that may be of
suffi cient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
DANGER:
Invisible and hazardous laser
radiation when open and
interlock failed or defeated. Avoid direct
exposure to beam.
Caution
Invisible laser beam.
Please do not look into or touch the
lens.

4
IMPORTANT SAFETY INSTRUCTIONS
FCC NOTICE:
This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to part 15 of the
FCC rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not Installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct
the interference by one or more of the
following measures:
ƽ
Reorient or relocate the receiving
antenna. Increase the separation
between the equipment and receiver.
ƽ Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
ƽ Consult the dealer or an experienced
radio/TV technician for help.
Caution: Any changes or modifications to
this device not explicitly approved by
manufacturer could void your authority to
operate this equipment.
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
RF Exposure Information
The device has been evaluated to meet
general RF exposure requirement. The
device can be used in portable exposure
condition without restriction.
WARNING
USE UNDER SUPERVISION OF AN
ADULT DUE TO LONG CORD
This unit has a long AC cord or other long
cord that can easily be tripped on or
pulled on, causing injury. Please make
sure it is arranged so it will not drape over
a tabletop etc. where it can be pulled on
by children or tripped over accidentally.
EXERCISE CAUTION AS UNIT HAS
SHARP POINTS.
Before using the unit, be sure to read all
operating instructions carefully. Please
note that these are general precautions
and may not pertain to your unit.
1 ) Read these instructions
All the safety and operating instructions
should be read before the product is
operated.
2 ) Keep these instructions
The safety and operating instructions
should be retained for future reference.
3 ) Heed all warnings
All warnings on the product and in the
operating instructions should be adhered
to.
4 ) Follow all instructions
All operating and use instructions should
be followed.
5 ) Do not use this apparatus near
water
Do not use this product near water and
moisture, for example: near a bathtub,
washbowl, kitchen sink or laundry tub; in
a wet basement or near a swimming pool.
6 ) Clean only with dry cloth
Unplug this product from the wall outlet
before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a dry
cloth for cleaning.

5
IMPORTANT SAFETY INSTRUCTIONS
7 ) Do not block any ventilation
openings. Install in accordance with
the manufacturer's instructions.
Slots and openings in the cabinet and
in the back or bottom are provided for
ventilation, to ensure reliable operation
of the product and to protect it from
overheating. These openings must not be
blocked or covered. The openings should
never be blocked by placing the product
on a bed, sofa, rug or other similar
surface. This product should never be
placed near or over a radiator or heat
source. This product should not be
placed in a built-in installation such as a
bookcase or rack unless proper ventilation
is provided or the manufacturer's
instructions have been adhered to.
8 ) Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifi ers)
that produce heat.
9 ) Do not defeat the safety purpose of
the polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong
are provided for your safety.
If the provided plug does not fi t into your
outlet, consult an electrician for
replacement of the obsolete outlet.
10 ) Protect the power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11 ) Only use attachments/accessories
specified by the manufacturer.
12 ) Use only with the cart, stand, tripod,
bracket, or table specifi ed by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus
combination to avoid injury
from tip-over.
An appliance and cart
combination should be moved with care.
Quick stop, excessive force and uneven
surfaces may cause the appliance and
cart combination to overturn.
13 ) Unplug this apparatus during
lightning storms or when unused for
long periods of time.
To protect your product from a lightning
storm, or when it is left unattended and
unused for long periods of time, unplug
it from the wall outlet and disconnect the
antenna or cable system.
This will prevent damage to the product
due to lightning and power-line surges.
14 ) Refer all servicing to qualifi ed
service personnel. Servicing is required
when the apparatus has been damaged
in any way, such as power-supply cord or
plug is damaged, liquid has been spilled
or objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture does not operate normally, or
has been dropped.
15 ) Power source
This product should be operated only
from the type of power source indicated
on the marking label.
If you are not sure of the type of power
supply to your home, consult your
appliance dealer or local power company.
For products intended to operate from
battery power, or other source, refer to
the operation instructions.
Portable Cart Warning

6
IMPORTANT SAFETY INSTRUCTIONS
16 ) Power lines
An outside antenna system should not be
located in the vicinity of overhead power
lines or other electric light or power
circuits, or where it can fall into such
power lines or circuits.
When installing an outside antenna
system, extreme care should be taken
to keep from touching such power lines
or circuits as contact with them might be
fatal.
17 ) Overloading
Do not overload wall outlets and extension
cords as this can result in a risk of fi re or
electric shock.
18 ) Object and liquid entry
Never push objects of any kind into the
product through openings as they may
touch dangerous voltage points or short
out parts that could result in fi re or electric
shock. Never spill or spray any type of
liquid on the product.
19 ) Outdoor antenna grounding
If an outside antenna is connected to the
product, be sure the antenna system is
grounded so as to provide some
protection against voltage surges and
built up static charges. Section 810 of
the National Electric Code ANSI/NFPA
70 provides information with respect
to proper to grounding of the mast and
supporting structure, grounding of the
lead-in wire to an antenna discharge
product, size of grounding conductors,
location of antenna discharge product,
connection to grounding electrodes
and requirements for the grounding
electrodes.
20 ) Service
Do not attempt to service this product
yourself as opening or removing covers
may expose you to dangerous voltage
or other hazards. Refer all servicing to
qualifi ed service personnel.
21 ) Replacement parts
When replacement parts are required,
be sure the service technician uses
replacement parts specifi ed by the
manufacturer or those that have the same
characteristics as the original parts.
Unauthorized substitutions may result in
fi re or electric shock or other hazards.
22 ) Safety check
Upon completion of any service or repairs
to this product, ask the service technician
to perform safety checks to determine
that the product is in proper operational
condition.
23 ) Wall or ceiling mounting
The product should be mounted to a wall
or ceiling only as recommended by the
manufacturer.
24 ) Damage requiring service
Unplug this product from the wall outlet
and refer service to qualifi ed service
personnel under the following conditions.
a ) When the power-supply cord or plug is
damaged.
b ) If liquid has been spilled or objects
have fallen into the product.
c ) If the product has been exposed to
rain or water.
d ) If the product does not operate
normally by following the operating
instructions. Adjust only those controls
that are covered by the operating
instructions, as an adjustment of other
controls may result in damage and will
and require extensive work by a
qualifi ed technician to restore in the
product to its normal operation.
e ) If the product has been dropped or the
cabinet has been damaged.

7
f ) When the product exhibits a distinct
change in performance-this indicates a
need for service.
25 ) Note to CATV system installer
This reminder is provided to call the CATV
system installer's attention to Article 820-
40 of the NEC that provides guidelines
for proper grounding and, in particular,
specifi es that the cable ground shall be
connected to the grounding system of the
building, as close to the point of cable
entry as practical.
NOTE: Refer all servicing to qualifi ed
service personnel servicing is required
when the unit has been damaged in any
way such as the following: the power
supply cord or plug has been damaged,
liquid has been spilled into unit, the unit
has been exposed to rain or moisture, the
unit has been dropped or the unit does
not operate normally.
IMPORTANT SAFETY INSTRUCTIONS
NOTES ON HANDLING:
ƽ When shipping the unit, always use the
original shipping carton and packing
materials. For maximum
protection, repack the unit as it was
originally packed at the factory.
ƽ Do not use volatile liquids, such as
insect spray, near the unit. Do not
leave rubber or plastic products in
contact with the unit for a long time.
They will leave marks on the fi nish.
ƽ The top and rear panels of the unit
may become warm after a long period
of use. This is normal and not a
malfunction.
ƽ When the DVD player is not in use, be
sure to remove the disc and turn off
the power.
NOTES ON LOCATING THE DVD
PLAYER:
When you place this unit near a TV, radio
or VCR, the playback picture may become
poor and the sound may be distorted. In
this case, move the unit away from the
TV, radio or VCR.
NOTES ON CLEANING:
Use a soft, dry cloth for cleaning
ƽFor stubborn dirt, soak the cloth in a
weak detergent solution, wring well
and wipe. Use a dry cloth to wipe it
dry. Do not use any type of solvent,
such as thinner and benzene, as they
may damage the surface of the unit.
ƽ If you use a chemical-saturated cloth
to clean the unit, follow that product's
instructions.
Warning: Cleaning and adjustment of
lenses and/or other components of
playback mechanism should be performed
by a qualifi ed service technician.

8
IMPORTANT SAFETY INSTRUCTIONS
NOTES ON MOISTURE
CONDENSATION:
Moisture condensation damages the
DVD player.
Please read the following carefully.
ƽ Moisture condensation occurs, for
example, when you pour a cold drink
into a glass on a warm day. Drops of
water form on the outside of the glass.
In the same way, moisture may
condense on the optical pick-up lens
inside this unit, one of the most crucial
internal parts of the DVD player.
Moisture condensation occurs during the
following cases:
ƽWhen you bring the DVD player directly
from a cold place to a warm place.
ƽWhen you use the DVD player in a
room where you just turned on the
heater, or a place where the cold wind
from the air conditioner directly hits the
unit.
ƽIn summer, when you use the DVD
player in a hot and humid place just
after you moved the unit from an air
conditioner room.
ƽWhen you use the DVD player in a
humid place.
Do not use the DVD player when moisture
condensation may occur:
ƽIf you use the DVD player in such
a situation, it may damage discs and
internal parts. Remove the disc,
connect the AC/DC adapter to the DVD
player and the wall outlet, turn on the
DVD player and leave it on for two or
three hours. After two or three hours,
the DVD player will have warmed up
and evaporated any moisture.
WARNING:
- Do not use or leave the device in direct
sunlight or a hot environment such as a
vehicle etc. that is in hot environment.
Overheating can damage the device.
- Do not overcharge the device – do not
leave the device on the charger for
very long after the battery has been fully
charged.
- Device should be protected from any
physical impact or damage and care
should be taken not to drop the device.
- Only use the factory supplied charger.
The use of unapproved charger or cable
may cause the battery to fail, explode
and/or damage the device.
- Do not disassemble, puncture, crush or
expose your device to temperatures
above 40°C / 104°F.
- Keep your device away from fi re or
water.
- Keep your device from moisture and
extreme temperatures.
- Should your battery swell or expand,
please immediately discontinue use of
your device.

9
ABOUT DISCS
The region number for this DVD Player is: 1
See the following page for information regarding region numbers.
PLAYABLE DISCS:
The following discs can be played back on this DVD player:
DISC TYPES:
DVD
Data on most DVDs is divided into sections called
titles and then into subsections called chapters, each
of which is given a title or chapter number. Some
features of this DVD player will not operate with some
DVD discs as they are preset. If a function you
selected does not run as desired, refer to the manual
accompanying the DVD disc.
AUDIO CD
Data on an audio CD is divided into sections called
tracks, each of which is given a track number.
IMPORTANT:
It is important that you read the manual that accompanies the DVD disc, as there are
features that are on the DVD player that cannot be used with certain DVDs.
There are also extra features on the DVD disc that are different for each DVD disc, so
they are not explained in this owner's manual.
This player conforms to the NTSC and PAL color systems. However, if you are in the
USA, Canada or Mexico, leave this setting on NTSC. If incorrectly set to PAL, the TV
picture may roll vertically. In this case, set the TV system to NTSC.
Notes on Copyright:
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public and
rent copyrighted material without permission. DVD video discs are copy protected,
and any recordings made from these discs will be distorted. This product incorporates
copyright protection technology that is protected by method claims of certain U.S.
Patents and other intellectual property rights owned by Macrovision Corporation, and is
intended for home and other limited viewing uses only, unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Region Management Information:
This DVD Player is designed and manufactured to respond to the Region Management
Information that is recorded on a DVD disc. If the Region number described on the DVD
disc does not correspond to the Region number of this DVD player, this DVD player
cannot play that disc. You may not be able to play back some DVD video discs on this
player if they were purchased from outside your geographic area or made for business
purposes. When you try to play back an unauthorized disc, Wrong Region appears on
the TV screen.

10
LOCATION OF CONTROLS
1. LCD ON/OFF: Press to turn on or turn off the screen. (Saving the battery power while
music playback)
2. MENU: Press to return to disc's menu page. (Function depends on the disc features).
3. SETUP: Press to enter to DVD system setup menu and press again to exit.
4. USB/CARD: Press to enter the playback source switch window; use the Direction
and ENTER or OK button to select one as desired. Press again to exit
this window.
5. AUDIO: Press repeatedly to select the audio channels. (Function depends on the disc
feature).
6. SOURCE: Press to enter to AV IN mode; press again to resume normal mode.
7. (Up) / (Previous) button
(Left) / (Fast Rewind) button
(Right) / (Fast Forward) button
(Down) / (Next) button
ENTER: Press to confi rm the operations.
8. VOL (Volume) -: Press to decrease volume level.
9. VOL (Volume) +: Press to increase volume level.
10. Stop: Press once to pre-stop, press again to stop completely.
11. Play/Pause: Press to start playback or pause.
12. DISCONNECT: Press to disconnect the connected Bluetooth device.
13. TITLE: Press to return to disc's title page. (Function depends on the disc recording).
14. OPEN: Slide to right to open the disc door.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
DISCONNECT

11
LOCATION OF CONTROLS
Right Side View:
Front Side View:
15. USB Port
16. CARD Slot
17. (Phones) Jack
18. AV OUT Jack
19. AV IN Jack
20. POWER ON/OFF Switch
21. DC IN Jack
22. Charging indicator
23. Remote sensor
24. Bluetooth indicator
15 16 17 18 19 20 21
22 23 24
When the DVD player is connected to the power supply, the indicator will
turn on in red if the built-in battery is not fully charged, and will turn off if the
battery gets fully charged or the power supply is cut off.
When the DVD player is turned on, the indicator will turn on in green if the
built-in battery is fully charged.

12
REMOTE CONTROL
1. POWER button
2. VOLUME +/– buttons
3. MUTE button
4. SOURCE button
5. Direction buttons
6. Skip Next button
7. Fast Forward button
8. (Play/Pause) button
9. DVD/USB/SD button
10. TITLE/MENU button
11. (STOP) button
12. AUDIO button
13. GOTO button
14. REPEAT button
15. SLOW button
16. LCD ON/OFF button
17. Numeric buttons
18. SETUP button
19. Skip Previous button
20. Fast Backward button
21. OSD (On Screen Display button
22. SUBTITLE button
23. ANGLE button
24. PROG (Program ) button
25. OK button
26. STEP button
27. ZOOM button
28. A-B Repeat button

13
MAKING CONNECTIONS
Charging by AC/DC Adapter:
1. Connect the small plug of AC/DC Adapter to the DC IN Jack on the right of unit.
2. Connect the other plug of AC/DC Adapter to the wall outlet with AC 100-240V~; 50/60Hz.
Note:
Your battery will last longer if you follow these simple guides for caring for and
storing it.
A. Recharge and store the device within the temperature range of 5°C~35°C
(40°F~95°F).
B. Do not overcharge (longer than 24 hours). Excessive charging or discharging may
shorten the battery's life.
C. Battery life naturally shortens slowly over time.
D. The rechargeable battery incorporated in this product is not replaceable.
Charging by Car Adapter:
1. Connect to the cigarette lighter socket of a vehicle with 12V battery as the fi gure
below.
NOTE: It is NOT compatible with a vehicle with 24V battery.
2. This is a special negative ground Car Adapter. Using this Car Adapter with a plus
grounded car can cause malfunction.
3. Do not plug in the Car Adapter until the car ignition is turned on.
4. Disconnect the Car Adapter from the cigarette lighter and the unit after use.
For the Unit

14
Battery installation
1. Press the tabs on the battery door and lift it off.
2.Install two (2) x AAA size batteries into the
battery compartment as the figure on right and
the polarity markings inside battery
compartment.
3. Replace the battery door.
Battery Precautions
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specifi ed.
2. Be sure to follow the correct polarity when installing the batteries as indicated next to
the battery compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and
Carbon Zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to
prevent damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and
rupture. (Follow battery manufacturers directions.)
6. Do not dispose of batteries in fi re, batteries may explode or leak.
7. Clean the battery contacts and also those of the device prior to battery installation.
MAKING CONNECTIONS
Remarks:
1. When there is an obstacle between the unit and the transmitter, the transmitter may
not operate.
2. When direct sunlight, an incandescent lamp, fl uorescent lamp or any other strong
light shines on the remote control of the unit, the remote operation may be unstable.
Remote Control Working Range
For the Remote Control

15
SWIVEL PANEL
The viewing angle of the swivel panel can be adjusted as below as desired:
90

16
GENERAL OPERATIONS
1. Lift the panel and turn to desired angle. Slide the Power ON/OFF switch to "ON"
position to power on the unit.
2. Slide the OPEN switch to right to open the disc door. Place a disc on the center
spindle with label side facing up. Close the disc door and the player will start playback
automatically.
3. During playback:
~ Press the or button repeatedly to fast search for a specifi c section forward
or backward. Press the button to resume normal playback.
~ Press the or button repeatedly to skip to specifi c track.
~ Press the button to pause, press it again to resume normal playback.
~ Press the VOL(volume)+/- buttons to adjust volume level.
~ Press the button to stop playback. The player will remember the point where the
disc was stopped. Press the button to start playback from this point.
Press the button twice to stop completely, press the button to start playback
from the beginning of the disc.
4. Press the POWER button on the Remote Control to turn the player to standby mode.
The Bluetooth indicator will light in red. Press the POWER button again to turn the
player on from standby mode. (For saving energy, always power off the player by
slide the Power ON/OFF switch on the player to OFF position or unplug the AC/DC
Adaptor from player and wall outlet)
Repeat Playback: (DVD)
ƽ During playback, press the REPEAT button once to repeat the current Chapter.
ƽ Press the REPEAT button twice to repeat the current Title.
ƽ Press the REPEAT button the third time to repeat all.
ƽ Press the REPEAT button repeatedly to turn off the repeat mode.
CD Program:
1. During CD playback, press the PROG (Program ) button to open program window as below:
...[CD]TRACK16
2/16
T RA CK0 6
T RA CK0 2
...
TRACK 15
TRACK 16
TRACK 16
Repeat Playback: (CD)
ƽ During playback, press the REPEAT button once to repeat the current Track.
ƽPress the REPEAT button twice to repeat all the tracks.
ƽ Press the REPEAT button repeatedly to turn off the repeat mode.

17
GENERAL OPERATIONS
2. Use the Directional buttons to move the cursor to a specified playback order
position, and use Numeric buttons to input the Title and Chapter of the movie
segment. If there is no chapter in a Title, input "01" at the C position.
2. Using the Direction buttons and OK button (or ENTER button) select and set the
desired track playback order.
3. Press STOP button twice to exit the program playback mode.
a. Use or button to select the desired track on the right; use OK button to
confirm it. then the track is added into the left box.
b. Use button to move to next page.
c. Use button to move the cursor to the left box, and use or button to
your selected tracks.
d.If you want to delete a track in the left box, just use or button to select it,
and then press OK button (or ENTER button) to delete it.
f.To delete the whole program playback order list, press button to icon, and
then press OK button (or ENTER button) to delete it.
e.To play the programed playback order list, press button to icon, and then
press OK button (or ENTER button) to delete it.
DVD Program:
1. During a disc of DVD is playback, press the PROG (Program) button to open
program window as below:
PRO GRAM PLAY CLEAR
3.To play the programed playback list, press button to move cursor to PLAY
button and press OK or ENTER button to start the playback.
4.To delete the programed playback list, press and button to move cursor
to CLEAR button and press OK or ENTER button to delete the list.
5. Press STOP button twice to exit the program playback mode.

18
USB OR CARD PLAYBACK
1. Insert the USB Device or SD/MMC memory card into the USB port/card slot as the
fi gure below.
2. Turn on your DVD player, and press the DVD/USB/SD button, the "DISC, CARD,
USB" selection window will pop up on the screen. Use the Direction buttons to select
and highlight the desired source then press the OK button to confirm.
3. During playback:
~ Press the or button repeatedly to skip tracks.
~ Press the or button repeatedly to select and set the fast searching speed.
~ Press the Play/Pause button to pause, press it again to resume normal playback.
~ Press the Stop button to stop current playback.
4.When the playback is stopped, Press Stop button to go back to the upper level menu.

19
OTHER WAY TO PLAY
Connecting to a TV or Video Player (such like DVD; VCR; DVR Players ...) with AV
connection cable
NOTE:
ƽThe default setting of the unit is AV OUT, if connect to external video player (such
like DVD; VCR; DVR Players ...), press the SOURCE button to set to
AV IN mode ("AV IN" will appear on the screen). Press again to turn back to
resume normal mode.
ƽUsing the supplied Earphone to listen privately.

20
BLUETOOTH TRANSMITTER OPERATION
With the Bluetooth transmitter feature, you can enjoy the movie or music through
your home theater system instead of through the DVD player.
A. Bluetooth Overview
Bluetooth version: 5.0
Bluetooth connection range: 10m (on the line of sight without obstacles)
B. Compatible Devices
This unit is designed as an audio Bluetooth sender. It can be connected to
BT receivers such as:
BT speakers,
BT headsets,
BT earphones,
...
It cannot be connected to BT senders including smart TV, cell phone, gaming
devices, projector, mouse, etc.
C. Before Connection
1. Power on your home theater system and turn it to BT mode. Note that it must be
disconnected from other audio/video input devices via Bluetooth.
2. Move your portable DVD player close to your home theater system, keep the
distance between them no more 10 m, and stop disturbance from the working
micro oven, cordless phone or Wi-Fi hotspot, etc.
3.Turn on your DVD player, and press SETUP button to enter SETUP mode.
D. Making the Connection
1.Press button to move the cursor to BT SETUP menu, and then press button
to select BT CONTROL and then SCAN as follows:
BT SETUP
BT CONTROL
BT LIST
SCAN
DISCONNECT
2. Press OK/ENTER button to start scan the device name of your home theater
system. The Bluetooth indicator will start blink in blue rapidly, and after about
20 seconds. it will turn off automatically when the searching process is finished.