Outdoor Theater Systems QuikScreen Pro User manual

QuikScreen Pro
Instruction Booklet

1

2
Setting Up Your Screen
1. Open the storage case and remove the screen frame. To expand the frame, you will
need two people. One person on each side of the frame should grasp the 2 plastic joints
on the edge in the center and walk backward pulling the frame open Velcro side up.
2. With the screen flat on the ground, snap down each plastic joint into place.
3. Attach the black screen to the frame by aligning their Velcro edges together. Unfold
the screen in sections with two people, one on each side of the screen. Next, attach the
white stretch screen on top of the black. Pull tight to ensure a smooth viewing surface!
4. While the screen is flat on the ground, estimate about 5 feet out to the side from each
bottom corner. Insert 1 twist stake about 5 feet in front of that point and another about 5
feet behind. Repeat on the opposite side.
5. Hook each of the 4 tie-down strap hooks into the D-Rings at the top corners of the
screen.
6. With 2 people on each side, walk the screen up onto its base until it’s fully raised. Hook
the opposite ends of the tie down straps into the ground twist stakes. Pull the ends of the
tie down straps to tighten. Ta-Da! The screen is up!
=Twist Stakes
=Tie Down Straps

4
952-513-7764
www.outdoortheatersystem.com
[e-mail]