Ovislink Air Live SmartCube 300W User manual

SmartCube 300W
Intelligent 3MP Wireless Cube IPCAM
with Temperature and Humidity Sensor
WiFi Setup

WiFi Setup using Smartphone/Computer
and router with WPS push button
Please check if your wireless router has "WPS
Push Button" shown as an example in the
picture below. If it does, please use this guide.
Ant.Reset/WPSLAN4 LAN3 LAN2 LAN1WAN USB
s
"
n
t
h
s
g
WPS Push Button

I/O Interface
Power Input
Ethernet Port
WPS and Reset Button
DC

Plug the power cable into the camera.
Plug the adapter

When SmartCube 300W is powered on, the
green led will be on first. After SmartCube
300W is ready, the red led will be on and the
green led will be off.
Power on SmartCube 300W

To make the wireless connection, click WPS
button on the router first.
WPS Wireless connection
Ant. Ant.Reset/WPSLAN4 LAN3 LAN2 LAN1
12V DC
WAN
Internet
S
out
el

Click WPS/Reset button on the Smartcube
300W within 2 minutes after press the WPS on
the router. When SmartCube 300W connects to
the router sucessfully, the green led will be
flashing.
WPS Wireless connection

WPS connection.(WPS function only supports
that the router is in WPA2 AES security
protocols or no protected password.)
WiFi Connection Notice

Download the AirLive APPCAM APP
After you connect to internet, please visit App
Store or Google Play to download AirLive
APPCAM APP. You can use QR code scanner
software directly or simply search the
“AirLive APPCAM”.
App Store Google Play
APPCAMAPPCAM
APPCAM

Appendix Support
You can download the
complete guides and
supporting programs from
<http://www.airlive.com/pro
duct/smartcube-300w/downl
oad>, or scan the QR code
here.
Please consult with the FAQs
<http://www.airlive.com/pro
duct/smartcube-300w/faq>
before writing to OvisLink
Tech Support Team for further
assistance
For any other question, please read the user
manual in the CD or mail to [email protected]
for technical support.