Owlenz SPD10 User manual

Smart Portable Display
user's manual
Model：SPD10
Warning:
Please remember the model and series number of the projector in case of loss.
Please carefully check all accessories with the pack list before throwing the package away.
Before using this projector, please read the user manual carefully.

Before using this equipment, please read the instructions in the product package
carefully.This product has been designed with full consideration of personal factors,
but it is incorrect but the method of use It may cause electric shock and life. In order
not to damage the internal but safe parts of the machine, please install, Use and
maintain the following regulations:
1. To prevent the danger of fire or electric shock, do not expose this product to rain
or moisture;
2. Before using this equipment, make sure all cables are connected correctly and
the power cord is not damaged, if any Any damage, please contact the dealer
immediately;
3. Avoid dust, humidity and extreme temperature. Do not place the device in any
damp area; Please place the device on a stable surface when using it;
4. Do not insert any foreign objects or splash any liquid into the openings on the
casing of the device;
5. Please use the power cord provided by the machine, if you use another power
cord and not provided by the dealer Yes, please confirm whether it meets the
relevant national standards. When the power cord is damaged, please contact
the dealer replace;
6. Please use a power supply with a voltage of 5V and a current of 3A or above, and
a mobile phone that meets the power supply requirements Electrical appliances,
power banks, USB3.0 devices and PD protocol devices can all supply power to the
display, please do not Use 5V 2A and a power supply lower than 5V 2A to power
the device, if you don’t know the power supply Type, please ask the dealer;
7. Don't try to open the back shell of the machine. There are no spare parts that can
be repaired by users. Please consult your dealer.
Security Information
1

To prevent other injuries, please observe the following regulations:
In order to prevent damage to the machine, the following situations should
be avoided:
Do not rub the screen with hard objects, otherwise it will scratch or permanently
damage the screen.
Do not press the screen with your fingers for a long time, otherwise it will cause
smearing and damage the screen in severe cases. If possible, try to use the
recommended resolution for best results. If using Resolutions other than the
recommended resolution may cause screen abnormalities, but this is Features of
fixed-resolution LCD panels. The static picture stays on the screen for a long time,
Cause damage and produce afterimages, please make sure to use a screen saver,
afterimages and related issues Not within the scope of product warranty. If you
encounter any technical problems while using this equipment For technical problems,
please contact professional technical service personnel or dealers.
1. When you leave for a long time, please turn off the monitor power,
2. Do not let children throw or insert objects into the monitor;
3. Do not install spare parts that are not specifically designed for this equipment:
4 When the equipment is left unattended for a long time, unplug the power cord:
5. When lightning strikes, please do not touch the power line or signal line, it may
cause electric shock hazard;
6. Don't let any objects press or twist the power cord;
7. Do not place the monitor where it is easy to damage the power cord.
1. Put the monitor in a place where it is easy to fall:
2. Place the monitor near a radiator or heat source;
3. The power cord is the main isolation device and must be placed in an
easy-to-operate place;
Security Information
2

Transmission of audio and video signals
Responsible for data transmission of
audio and video signals Return to the main menu interface
Long press the power keyboard for 3
seconds to make the monitor work status.
Connected to U disk resources for local playback, number
of connected mobile phones data transmission on
the same screen
Headphone/audio extension interface
Connect keyboard, mouse, mobile phone,
file data transfer
Support positive and negative plug, compatible
with PD2.0 power supply protocol,Support
5V/9V/12V/15V/20V voltage input
Adjust display parameters, interface function
app selection adjust the volume
OK to confirm, call out the menu function
of the display
Interface function introduction
3
F
G
H
I
J
K
L
A：HDMI interface
B：Type-C data transmission interface
C/D：USB interface
E：Type-C power supply interface
F/G：+/- key
H：MENU
I：Return Key
J：Power Button
K：Mobile phone wired same screen/local
playback USB interface
L：3.5mm headphone jack
A
B
C
D
E

I. Connect to a computer/mobile phone with a Type-c interface
1. Connect the portable display adapter to the power source. (Without battery version)
2. Press the "Power Switch" button of the monitor to turn on the computer.
3. Use a data cable with a double-head Type-c interface to connect one end to the computer,
and the other end to the portable display Type-c data transmission interface "B".
4. Select "Type-c" in the main menu of the monitor and press OK to confirm. At this time, the
monitor can do extended display.
5. You can also use the Type-c data transmission line to connect the phone with the Type-c
interface to the display.
Type-c connection steps
4
PS: 1. Expand the display under the Type-c interface. The monitor can also be used by connecting a mouse and
keyboard to the outside.
2. The Type-c interface of the mobile phone needs to support the DP video transmission function (for example:
Huawei P20/P30/mate30, Newer mobile phones such as Samsung Note9/10).
3. For mac computer, set screen extension or screen copy in "System Preferences" - "Display".
External power supply
Type-c to Type-c
Type-c HDMI
SETTINGMEDIA
Android & IOS

1. Connect the portable display adapter to the power source. (Without battery version)
2. Press the "Power Switch" button of the monitor to turn on the computer.
3. Connect one end of the HDMI data cable to the computer and the other end to the HDMI
port of the monitor.
4. Select "DHMI" in the main menu of the display and press OK to confirm. , The display can
be used as Extended display.
HDMI connection steps
5
II. Second, connect a computer with HDMI interface/Game console/DVD
PS: 1. Expand the display under the HDMI interface. The monitor cannot be used with a mouse and keyboard.
2. The mobile phone can be connected with HDMI to Type-c cable.
3. The desktop computer needs to enter "Display Settings"-"Multi-screen Display Settings" to set screen
extension or screen copy.
(The operation of different brands of computers is slightly different, please contact the merchant for details)
HDMI to HDMI
External power supply
Type-c HDMI
SETTINGMEDIA
Android & IOS

1. Connect the portable display adapter to the power source. (Without battery version)
2. Press the "Power Switch" button of the monitor to turn on the computer.
3. Insert the U disk into the local playback USB port ‘K’ of the portable display
(refer to the third page for the location of the port)
4. Select "USB" in the main menu of the monitor and press OK to confirm. Enter the
MEDIA playback interface.
5. In the multimedia interface, press the +/- key to choose to play video, browse pictures,
listen to music, and read documents.
USB local playback
6
III. use U disk to play video locally, read documents, listen to music, etc.
PS: Local reading and playback USB can only be inserted into the "local playback USB interface K" of the monitor
and the other two USB interfaces cannot play multimedia files
Video PhotoMusic Text
Type-c HDMI
SETTINGMEDIA
Android & IOS

1. Connect the portable display adapter to the power source. (Without battery version)
2. Press the "Power Switch" button of the monitor to turn on the computer.
3. In the main menu of the display, select "Android & IOS" - "AIRPLAY" to
enter the standby screen interface.
4. Open the phone "Settings" - "Wireless LAN" - "SDCAST-XXXX" connection.
5. Turn on the phone screen mirroring, select "SDCAST-XXXX," to enter the same screen.
1. In the main menu of the portable display, select "SETTING - " " -Wireless, search for
network connection to WIFI SSID.
2. In the main menu of the monitor, select "Android & IOS" - "AIRPLAY" to enter the standby
screen interface.
3. Open the phone "Settings" menu and open "WIFI" to connect to the same wireless router.
4. Turn on the phone screen mirroring and select "SDCAST-XXXX" to enter the same screen.
Screen Mirroring
7
PS: 1. The above connection party uses mobile phone data.
2. In the same screen state, press the OK key "H" to switch between horizontal and vertical screens.
PS: You can also perform wireless push operations under the same wireless router
IV. Screen Mirroring（IOS）
2）IOS Screen Mirroring（wifi connection）
网络：unknown
AIRPLAY
AIRPLAY NAME：SDCAST-47A890
NETWORK：ChinaNet-2.4G-0520
AIRPLAY Android DLNA MIRACAST WIRECAST
Type-c HDMI
SETTINGMEDIA
Android & IOS

1. Connect the portable display adapter to the power source. (Without battery version)
2. Press the "Power Switch" button of the monitor to turn on the device.
3. In the main menu of the display, select "Android & IOS" - "MIRACAST"
to enter the standby screen interface.
4. Open the phone "Settings" - "Wireless LAN" - "SDCAST-XXXX" connection.
5. Turn on the phone screen mirroring, select "SDCAST-XXXX" to enter the same screen
1. In the main menu of the portable display, select "SETTING" - " " -Wireless, search for
network connection to WIFI SSID.
2. In the main menu of the monitor, select "Android & IOS" - "MIRACAST" to enter the
standby screen interface.
3. Open the phone "Settings" menu and open "wifi" to connect to the same wireless router.
4. Turn on the phone screen mirroring and select "SDCAST-XXXX" to enter the same screen.
Screen Mirroring
PS: 1. The above connection party uses mobile phone data.
2. In the same screen state, press the OK key "H" to switch between horizontal and vertical screens.
V. Screen Mirroring（Android）
2）Android Screen Mirroring（wifi connection）
8
MIRACAST_CONNECTION_SETUP
LONG_MEG318
PIN
Projector nan SDCAST-XXXX
15129697
LONG_MEG319
WAITING_FOR_CONNECTION_REQUEST
RETURN ：EXIT
SCREEN_SHARING
AIRPLAY Android DLNA MIRACAST WIRECAST
Type-c HDMI
SETTINGMEDIA
Android & IOS

1. In the main menu of the portable display, select "SETTING" - " " -Wireless, search
for network connection to WIFI SSID.
2. Press the OK key "H" to select the WIFI to be connected.
3. Press the selection key "F" or "G" to enter the password input interface.
4. After entering the password, press the "Connect" button to connect. After the successful
connection is displayed, you can press the return button to return to the main page.
9
VI. Portable display WIFI connection
WIFI Connection
12
3
4

1. Connect the portable display adapter to the power source. (Without battery version)
2. Press the "Power Switch" button of the monitor to turn on the computer.
3. In the main menu of the display, select "Android & IOS" - "Android DLNA " to enter
the standby screen interface.
4. Open the phone "Settings" menu and open "wifi" to connect to the same wireless router.
5. Open the player on the mobile phone to play the video, click "TV" push, select
"SDCAST-XXXX" to enter Cast screen
PS: You need the player to have the screen projection function to cast screen (some players do not support screen).
10
网络：unknown
Android DLNA
Android DLNA name：SDCAST-47A890
NETWORK：ChinaNet-2.4G-0520
AIRPLAY Android DLNA MIRACAST WIRECAST
Type-c HDMI
SETTINGMEDIA
Android & IOS
VII. Mobile phone wireless projection (Android/IOS phone)
Smart Phone Wireless Projection (DLNA)

1. Connect the portable display adapter to the power source. (Without battery version)
2. Press the "Power Switch" button of the monitor to turn on the device.
3. In the main menu of the display, select "Android & IOS" - "WIRECAST" to enter
the standby screen interface.
4. Connect the mobile phone with a data cable, and connect the USB end to the display
"mobile phone with screen USB interface K".
5. The first connection (IOS mobile phone) interface will pop up "Trust Device" and click "Trust".
6. The first connection (Android phone) will jump to the "ByteFlymirror" APP download
interface, click just download and install the APP.
PS: In the same screen state, press the "OK" key to switch between horizontal and vertical screens
PS: Android phones must be wired on the same screen
Need to download and install this APP
VIII. Mobile phone wired with screen (Android phone/Apple phone)
11
WIRECAST
AIRPLAY Android DLNA MIRACAST WIRECAST
Type-c HDMI
SETTINGMEDIA
Android & IOS
Mobile phone wired same
screen (Android/IOS)

1. Within 7 days from the date of purchase, failures not caused by improper use or
man-made causes shall be determined as product components for failures caused
by parts, you can enjoy return and exchange services with valid purchase bills and
three-guarantee certificates.
2. The product warranty service period is effective from the date of production. The
projector series product host (excluding accessories / Pieces) 13 months warranty, failures
not caused by improper use or man-made causes are determined to be the main
component of the product for failures caused by parts, you can enjoy free maintenance
services with valid purchase bills and valid three-guarantee certificates.
1. Exceeding the validity period of the three packs;
2. There is no valid three guarantee certificate;
3. The screen has 3 or less dead pixels, 3 or less bright spots, and 5 or less dead pixels
and bright spots in total;
4. Unauthorized damage (man-made damage) caused by failure to use, maintain, and
maintain according to the product instruction manual the repairer disassembled and
Caused damage (dismantling and repairing privately);
5. Products not sold in Mainland China (excluding Hong Kong, Macau, and Taiwan).
This product provides original one-year warranty service
The following situations are not within the scope of the Three Guarantees
After-sales service
12

Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

Company Name: SHENZHEN STAR AUDIO-VISUAL EQUIPMENT CO.,LTD.
Company Add: RM 102,1st FL,Building 8,2rd Industry Zone, Shajing Street,
Baoan Distriet,Shenzhen
Phone: [phone]