Oxgard K-13 Quick start guide

Installation
guidelines
and operational
manual
www.oxgard.com
[email protected]
Tel.[phone]
K-13 electromagnetic swing gate

Installation guidelines and operational manual
Contents
1. Product purpose........................................................................................ 4
2. Delivery set............................................................................................... 4
3. Basic specifications.................................................................................. 5
4. Product design.......................................................................................... 7
5. Transportation and storage....................................................................... 9
6. Safety requirements.................................................................................. 9
7. Installation of swing gate ....................................................................... 11
7.1. Required equipment ......................................................................... 11
7.2. Installation of swing gate ................................................................. 11
8. Connecting swing gate........................................................................... 14
8.1. Power connection ............................................................................. 15
9. Operation of the swing gate ................................................................... 15

K-13 electromagnetic swing gate 4
1. Product purpose
Swing gate with electromagnetic release is used as a barrier and
designed for the rapid release of the passageway in case of emergency.
2. Delivery set
Table 1. Delivery set
Item
Qty, pcs.
K-13 electromagnetic swing gate
1
Installation guidelines and manual
1
Datasheet
1
Magnetic key
SORMAT PFGES10 (M10/60) anchor *
3
M10x50 DIN7991 hexagon screw *
3
*- optional

Installation guidelines and operational manual
3. Basic specifications
Table 2. Basic specifications
Specification
Value
Dimensions (WхHхL), mm depending of passage width
600
800
1000
724х145х1000
924х145х1000
1124х145х1000
Weight, kg *
from 13,2 to
15,0
Temperature range, ºС:
-Operation
-transportation and storage
+1…+40
+1…+40
Atmosphere relative humidity, no more than %
80
Lifetime, years
8
* - depends on arm length
Table 3 Electrical specifications
Description
Swing gate
Supply voltage, V:
- nominal
- working
12,0
10,8...13,2
Average current in standby mode * A
0,05
Average current operational mode * A
Up to 3,0
*- values mentioned at a nominal supply voltage
The manufacturer reserves the right to change the packaging, specifications and appearance
without notice

K-13 electromagnetic swing gate 6

Installation guidelines and operational manual
4. Product design
All components of the gate (Fig. 1) are made of brushed stainless
steel. The arm is attached to the stand with the use of mounting screws.
Stand rotates in relation to the stationary base mounted to the floor. Floor
fixation is concealed by base cover.
It is possible to install arms of different lengths to form the passage
of 600, 800, 1000 and 1200 mm width. Fig. 2 shows the dimensions of the
gate with 600 mm passage width.
Fig. 1 General view

K-13 electromagnetic swing gate 8
A control button is used as a gate control device (for example, a
doorbell button).
Fig. 2 Dimensions of the gate
The gate can be executed in 2 variants: right direction and left
direction. Fig. 3 shows the direction in which the gate opens.
Fig. 3 Variants of the gate

Installation guidelines and operational manual
5. Transportation and storage
Gate in its original packaging can be transported by air, covered by road
and rail with protection from direct exposure to rain and dust without
limitation range. Allow to stack boxes in 4 rows during transportation and
storage if Euro pallets are used. Keep the gate in dry (no moisture
condensation) heated places at temperatures within +1 to + 40 °C
temperature range. Avoid vapors of acids, alkalis, and corrosive gases at
the storage place. Storage of turnstile in the original package in a dry
unheated premises or closed transport containers is permitted for short
periods, no more than 3 days.
Before startup, the turnstile must be kept in a room with normal climate
conditions for 12 hours after storage in unheated rooms.
6. Safety requirements
CAUTION! Failure to comply with the safety requirements specified in
this section may result in damage to human life and health, total or partial
loss of workability of products and (or) auxiliary equipment.
CAUTION! The producer disclaims any liability for damage to human life
and health, total or partial loss of workability of products and (or) auxiliary
equipment for non-compliance of the safety requirements specified in this
section, as well as terminate the product warranty.

K-13 electromagnetic swing gate 10
IT IS NOT ALLOWED TO:
Set the gate other than in dry and heated places;
Apply chemically aggressive cleaning detergents (as pastes and
liquids) to the materials of the housing.