oxic XK5880 User manual

1. Instruction
XK5880 multifunctional control keyboard is a particular design to control speed dome,
PTZ camera, Matrix switcher and PC/Standalone DVR. It is a best choice of control site
for a multiple CCTV system.
Features：
●Password protection, support multiple user authority
●3-Axis joystick for PTZ control
●Large LCD, operate pattern tour, cruising track and presets by
OSD menu
●Control speed dome, PTZ camera, Matrix switcher and DVR
●Support character input, buttons with back light
●Ethernet and RS-485 port
Specifications:
Model XK5880
Protocol Pelco-D, Pelco-P
Baud 2400bps, 4800bps, 9600bps, 19200bps
Communication Interface RS-485, RS-422
Transmission Distance 1200 meters
Operation Temperature -10℃～50℃
Power Supply DC12V
Dimensions 440×240×100mm
①COM 1：A_B_G，RS485 port
COM2：A_B_Y_Z_G，RS422 port
②Network：10Base-T
③Power input：DC12V/1500mA
④Alarm：NC_COM: normal close，NO_COM: normal open
⑤Port for expended functions
2. Keyboard Layout
1

Area A: LCD with blue back light
Area B: The main buttons
【012……9】： Number and character input.
【ALM】： Switching the alarms
【MON】
：Switching the monitors
【CAM】
：Switching the cameras
【ESC】
：Cancel
【ENTER】
：Confirm
【MULTI】
：Switching videos in DVR control mode
【LOCK】
：Lock the current camera in Matrix control mode
【MAC】
：Start or stop macroinstruction
【PROG】： Press this button to enter into keyboard setting when the
keyboard is in Login interface; Press this button to enter into PTZ
setting when the keyboard is under PTZ control mode.
【AUX1~4】： auxiliary switch
【ARM】
：Press【ARM】to enable the alarm; Press【SHIFT】+【ARM】to
disable the alarm.
【ACK】
：Alarm responder
【MUTE】
：Keyboard mute button
【HOLD】： Save
【SHIFT】
：Combination Key；
【PRESET】
：Presets setting button. Press【PRESET】+ Number to set preset
positions.
【CALL】： Press 【CALL】+ No. of presets to call upon that preset position
【SITE】
：Press this button to set the main address when the keyboard is
under DVR control mode.
2

【PREV】： Press【PREV】to switch camera, monitor or alarm;
Press【PREV】to select the item upward in the menu setting
【NEXT】
：Press【NEXT】to switch camera, monitor or alarm;
Press【NEXT】to select the item downward in the menu setting
Area C: Area for DVR control：
①Stop ；
②Record
③Play the previous video
④Search engine
⑤Play/suspend
⑥Low speed playback
⑦Play the next video
⑧Snapshot；
⑨Knob button: use the inside track knob to view the video by single frame;
use the outside track knob to control the speed of playback.
Area D: Area for extended function buttons：
Press【F1】to【F10】to select icons on the LCD
Icons Defination:
：Turn the page forward；
：Turn the page backward;
：Move the cursor upward on the menu;
：Move the cursor backward on the menu;
：Save the current setting；The setting can only be enabled after saving
：Quite from the current menu and back to the upper menu
3

：Matrix parameter setting
：Enter into PTZ control
：Call upon auto cruises,8 groups；
：Call upon pattern tours, 4 groups；
：Call upon auto scan, 8 groups
：Stop the current PTZ move.
：Aux switcher；
：Aux switcher；
：Aux switcher；
：Aux switcher；
Area E: Area for Lens Control：
Iris Open
Zoom in
Focus Out
Focus In
Iris Close
Zoom out
Area F: Area for device selection and Matrix override control
【MODE】
：Press【MODE】to switch the control status among Matrix, DVR and PTZ
【PRI】
：Press【PRI】to enter Matrix override control
Area G: 3-Axis joystick
2. Keyboard Settings
All the menu operation can be done by the joystick. Move the joystick to the left equal to
pressing 【ESC】, move to the right equal to Press【PROG】, move upward equal to
4

Pressing【PREVIOUS】, move downward equal to Pressing【NEXT】.
①Power On
●Connect the keyboard with the power supply.
●Press【MODE】to select the control status among Matrix, DVR and PTZ.. Then
press【PROG】to confirm.
● Press【PROG】to enter into keyboard settings
②Keyboard Login
Login Interface:
2007-09-28 11:25:34
Device:Matrix
CommPort:Ethernet
KBDＩＰ:010.010.010.080
MatrixＩＰ:010.010.010.050
Press<ENTER> Log on device；
<MODE>Switchdevice；
<PROG> Set up keyboard；
● Press【ENTER】to log on the current device; Press【PROG】to enter into
keyboard settings
● User name and password: The default user is No.1. The default password is
000000
③Keyboard Settings
● Net Management
● User Management
● Password Setup
● Devices Setup
● Hardware Setup
● Delay Setup
● Hardware Test
● Joystick Setup
● Time Setup
● Language
5