Oypla GARDEN 3102 User manual

User Manual
USER MANUAL Model No: 3102
Heavy Duty Snow Shovel

Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on
this condition, which no representative of the company can waive or change.
•This product contains small parts that could be a choking hazard if swallowed. Keep these items away
from children.
•If at any time during use you feel faint, dizzy or experience pain, stop and consult your physician or
doctor.
•Make sure all fastenings are tightly in place and that everything is in order before using the product.
This should be checked periodically by an adult.
•This product is not a toy, and is only to be used for its designated purpose.
•Do not carry out alterations or modifications to this product.
•Children should be supervised at all times when using the product.
•Clean only with a damp cloth. Do not use strong industrial cleaning substances.
•Leaving the product outside exposed to weather, especially direct sun and rain, will speed the
weathering process. This can be slowed by removing the product from these conditions, or covering
it with a suitable cover.
•Keep fingers, loose clothing, and hair away when folding the product.
•This product is intended for outdoor use only.
•If the product is damaged or has any defects, please contact [email protected]
Parts List
USER MANUAL Model No: 3102

Step 1: Snow Shovel Head Assembly
Secure the snow shovel head onto the
bracket. Insert 4pcs of (part F) from front of
shovel through (part G) into (part E) and
secure with (part I). As shown in below photo.
Step 2: Wheel Assembly
Using 2pcs of (part K), bolt the left and
right wheels onto the brackets you
assembled in Step 1. Use 2x (part L) for
each to wheel to ensure it can turn freely
and secure in place with (part N). As
shown in below photo.
Step 3: Handle Assembly
Attach (part B) to the shovel frame using
2pcs of (part H). Attach (part C) to (part B)
using 4x (part O) and (part P).
Step 4: Using Your Product
You should now have a fully assembled
product. Please be careful while shovelling
snow as your balance can be
compromised. Only use this product as it
was intended.
Operating Instructions
Please retain a copy of all instructions for future consultation.
USER MANUAL Model No: 3102