OYPLA Home 3389 User manual

User Manual
Hanging 36 Shoe Rack
*COLOUR MAY VARY
USER MANUAL Model No: 3389, 3854

This product is not a toy, and is only to be used for its designated purpose.
This product contains small parts that could be a choking hazard if swallowed.
Keep these items away from children.
Make sure all fastenings are tightly in place and that everything is in order before
using the product. This should be checked periodically by an adult.
This product is intended for indoor use only.
Never carry out any alterations or modifications to this product.
Clean only with a damp cloth. Do not use strong industrial cleaning substances.
Make sure that the product is secured correctly against the desired surface
before applying any weight.
Do not discard any of the packaging until you have checked that you have all of the
parts and fittings required.
Use the correct fixings as indicated. Do not tighten any of the nuts until the unit is
completely assembled, then finish by tightening all nuts. All nuts must be tightened
before use.
If the product is damaged or has any defects, please contact [e-mail]
USER MANUAL Model No: 3389, 3854
USER MANUAL Model No: 3389, 3854
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on
this condition, which no representative of the company can waive or change.

USER MANUAL Model No: 3389, 3854
Parts List:
Please check you have all parts below before attempting to assemble this product.
If you are missing any of the below parts, please contact Oypla customer services:
[e-mail]
Please be aware you will be referring to this parts list throughout the assembly process.
Assembly Instructions
1. Lay either the right or left rack support on its side, making sure the slots to insert the rack pole are facing
upwards. After this, begin to push the rack poles into the slots, ensuring that they go all the way in. Once done,
push the opposite rack support side onto the rack poles. Force may be required. Please see the images above.

2. If you wish to continue to add racking for the
shoe rack, repeat the previous step to create a
maximum of two more sets of racking. Once you’ve
made the additional racking, attach the racking
together using the plastic slotting on both the left
and right rack support. Please see the image to the
right.
USER MANUAL Model No: 3389, 3854
3. After all the racking has been constructed to its
desired length, slide the top of the created racking
into the door attachment. Once done, guide the
door attachment into the door latch, ensuring that
is secured on the jagged interior.