OYPLA Home 3736 User manual

User Manual
USER MANUAL Model No: 3736
30 Bottle Wine Rack

Make sure all fastenings are tightly in place and that everything is in order before
using the product. This should be checked periodically by an adult.
Do not discard any of the packaging until you have checked that you have all of
the parts and fittings required.
Use the correct fixings as indicated.
This product is not a toy, and is only to be used for its designated purpose.
Do not carry out any alterations or modifications to this product.
Only use this product on stable, level and dry ground.
Make sure all platforms are secure before applying weight to the product.
This product is intended for indoor use only.
This product is for domestic use only.
Clean only with a damp cloth. Do not use strong industrial cleaning substances or
abrasive materials as these will damage the product.
This product contains small parts that could be a choking hazard if swallowed.
Keep these items away from children.
If the product is damaged or has any defects, please contact [e-mail]
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
USER MANUAL Model No: 3736

Note: Hammer/Mallet is needed but is not included with the product.
QUANTITY
ITEM
PICTURE
12
Interlocking
Rails
12
Metal Rails
2
Mounting
Plate
35
Wooden
Rails
35
Nails
Assembly Instructions
Parts List:
Please check you have all parts below before attempting to assemble this product.
If you are missing any of the below parts, please contact Oypla customer services:
[e-mail]
Please be aware you will be referring to this parts list throughout the assembly process.
USER MANUAL Model No: 3736

Please retain a copy of all instructions for future
consultation.
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX
1. Assemble the front of the wine rack by slotting together the
interlocking rails. This should be attempted on a flat surface to
ensure all the joins are level. See example to the right.
2. Line up and insert the wooden rails into the metal frame. Use a
mallet or hammer to ensure that the wooden rails are securely
fitted onto the frame. See example to the right.
USER MANUAL Model No: 3736
3. Place the metal rails over the top of the partially assembled rack,
checking that the holes in the metal rails line up with the holes in
the end of the wooden rails. See example to the right.
4. Complete the wine rack assembly by overlaying the
remaining metal rails and hammering in the nails. See example
to the right.