OzSpy HDKEYCAMX10 User manual

1
Oz Spy
–
User Manual
HDKEYCAMX10
User’s Manual
Features:
The HD keyring camera is a covert device that takes 1080P recordings and stores them to a
micro SD card
Turning on your keycam
Hold the On/Off button until the device vibrates
Recording with your key cam
Turn the device on, and press the On/Off button once to begin recording a video, to stop
simply press the button again once
Turning Nightvision on / off

2
Oz Spy
–
User Manual
Hold the IR On/Off button until you feel the device vibrate
Setting Motion Detection
Turn the device on, and then press the start / stop button 3 times.
The device will now have a solid blue light and a flashing red light. Device
is now in motion detection mode.
To stop simply press the Stop / Start button once.
Charging:
Find the USB cable and the charger that was provided with the device, insert one end of
the connecting cable to the “Charge” hole of the device and put the other end to a free PC
usb port.
When charging, the red light and blue light on the chargers are on. When fully charged, the
red light comes on and blue goes out.
(Give at least 3-5 hours for charging time).
Downloading your recordings
Simply plug your device in via the provided USB cable to a windows or Mac PC
You will then be able to access the memory as a removable disk !

3
Oz Spy
–
User Manual
HDKEYCAMX10 Led Code Meaning Table
Mode
Button
Red Led
Blue Led
Yellow Led
Unit Off
Press Unlock for 3 sec to turn off
OFF
OFF
OFF
Unit On
Press Unlock for 3 sec to turn on
On startup the unit will check for SD card, if OK, it will
go into Mode 1 state (see below)
Mode Selection
To move between modes press the Lock button
Mode 1, Video Recording - Standby
ON
OFF
ON=IR ON
OFF=IR OFF
Mode 1, Video Recording - Active
Press Unlock to turn start/stop
Flashing
OFF
ON=IR ON
OFF=IR OFF
Mode 2, Photo Mode - Standby
OFF
ON
ON=IR ON
OFF=IR OFF
Mode 2, Photo Mode - Active
Press Unlock to take a photo.
Blue light flashes and returns to standby
OFF
Flashes
ON=IR ON
OFF=IR OFF
Mode 3, Audio Recording - Standby
ON
ON
n/a
Mode 3, Audio Recording - Active
Press Unlock to turn start/stop
Flashing
ON
n/a
Mode 4, Motion Detection - Standby
Flashing
ON
ON=IR ON
OFF=IR OFF
Mode 4, Motion Detection - Active
Press Unlock to turn start/stop.
Note once motion is activated, it does not stop, it
continues unless manually stopped, card is full or runs
out of battery
Flashing
Flashing
ON=IR ON
OFF=IR OFF

4
Oz Spy
–
User Manual
Setting up the time
First create a text file named TIMERSET.txt
Then add the current date and time the format is year, month, day, 24hour, minute,
seconds with no spaces or slashes.
Then add a Y after a space at the end.
So if the date is 26th October 2015 at 3.30pm and 45 seconds your file should have.
20151026153045 Y
Copy the TIMERSET.txt file onto the SD card for your device and your device should now
have correct time and date stamp.

5
Oz Spy
–
User Manual