P-Squared P2 Quadcharger PRO User manual

WARNING – NEVER CHARGE LEAKY, DAMAGED or SWOLLEN BATTERIES – THIS CAN
CAUSE A FIRE HAZARD!
Do NOT charge battery immediately after flight, battery must have time to cool
before charging. Do NOT charge battery until it cools to room temperature.
This product is not a toy! Not for use by children under 14 years of age.
Never leave unattended while charging.
Disconnect charger when not charging.
Never charge on or near open flame.
Do not use in rain or moisture.
Do not drop strike or impale.
Do not disassemble or alter the unit. Contact P-Squared Group for service or repair.
Do not use an attachment not recommended for the P2 Quadcharger PRO.
Caution
Do not operate this unit if it has been damaged in any way. Contact P-Squared Group
for repair.
Unplug from outlet before attempting to clean. To clean use a damp cloth and then
wipe dry.
Always follow manufacturers recommended charging procedures.
Please note – P2 Quadcharger PRO is made with fire retardant ABS, but is not
considered “fireproof”.
Note: Make sure the cover to your P2 Quadcharger PRO is securely fastened to the
charger case before lifting or carrying.
P-Squared Group, LLC is not responsible for any damage to batteries that fall out of
your P2 Quadcharger PRO
Warranty
This product carries a One year Limited Warranty- for a period of one year from the
date purchase, P-Squared Group shall repair or replace, at our discretion, defective
equipment covered by this warranty. This warranty does not cover cosmetic
damages and damages due to acts of God, accident, misuse, abuse, negligence,
improper installation or damages caused by alterations by unauthorized
persons. This warranty only applies to the original purchaser of this product.
For help or Service Contact:
P-Squared Group, LLC
719-776-9146
P-squaredgroup.com
Please visit our website for the latest edition of this Instruction Manual.
Instruction Manual
Important Safety Information:
This manual contains important safety and
operating instructions. Thoroughly read all the
instructions and cautionary notes before you
use your P2 Quadcharger PRO.

Instruction/Safety Manual – P2 Quadcharger PRO
Thank you for purchasing P-Squared Group’s P2 Quadcharger PRO.
Please read this Instruction/Safety Manual fully before charging any
batteries.
This product is to be used with the Phantom 2 family of Intelligent Flight
Batteries (not included).
The P2 Quadcharger PRO will allow you to charge up to four batteries
simultaneously, in the same amount of time traditional chargers will charge
one. The P2 Quadcharger PRO provides safe mobile storage that can also
charge through your vehicle’s charging port.
Features:
P2 Quadcharger PRO (batteries not included) is a true rapid charger that
intelligently manages the charging current, voltage and temperature during
charging as well as being a convenient, lightweight storage and carrying
case.
In the box:
One P2 Quadcharger PRO
Instruction/Safety Manual
AC/DC power Supply
AC Power cord
DC Charging cable
Vehicle charging cable
Power pouch (optional)
Warning – Check “Vehicle Charging Chart” at www.p2-squaredgroup.com
for the number of batteries your vehicle should be able to safely charge
before proceeding with vehicle charging!
Charging
1.Securely plug your Phantom 2 batteries into the P2 Quadcharger PRO’s
charging slots.
2. Plug the DC charging cable into the P2 Quadcharger PRO.
3. Plug the DC charging cable into the AC/DC power supply.
4. Plug the AC power cable into the AC/DC power supply.
5. Plug the AC power cable into your AC power source (wall receptacle,
generator, etc.).
6. Turn the on/off power switch on the AC/DC power supply to the ON
position.
The “Power Output” LED lights will come on and your batteries will start
charging.
If three or four batteries are plugged into the P2 Quadcharger PRO for
charging, all the LED lights – including the “RED Max” light - will come on.
This is normal operation.
Batteries can be inserted or removed while charging.
Batteries will turn off when fully charged.
Note: Charger will not charge any battery that the sensors indicate is too hot
or if conditions are too cold.
Note: If a battery is already charged above 50% when charging begins you
may need to turn the battery ON to initiate charging.
Vehicle charging:
1.Insert your Phantom 2 batteries into the P2 Quadcharger PRO charging
slots.
2. Plug the vehicle charging cable into the P2 Quadcharger PRO.
3. Plug the vehicle charging cable into the vehicle’s charging port.
Note: Depending on the level of charge in each battery the charging process
will start and stop as the amount of charge in the batteries equalizes.
Note: Vehicle charging with your P2 Quadcharger PRO is designed as a
Supplemental Charging process. Therefore in most vehicles the batteries will
only charge to between 50% – 70% of the battery’s charging capacity.
Note: Vehicle should be running while charging with the P2 Quadcharger
PRO to avoid draining the vehicles battery.