PALAB Mastre CANARY HPA-1 User manual

CANARY HPA-1 HEADPHONE
AMPLIFIER USER’S MANUAL
V 1.0

Quick Start Guide
Front Panel View
POWER GAIN
STANDBY L HM
BALANCED
UNBALANCED MIN MAX
12
3
4
5
6 7
1. POWER BUTTON
2. GAIN SWITCHING
3. VOLUME CONTROL
4. TRRS 4.4mm BALANCED PHONE JACK
5. TRS 6.3mm UNBALANCED PHONE JACK
6. STANDBY LED ( Lights up red to indicate standby mode )
7. GAIN LED L : LOW M : MIDUIM H : HIGH
Rear Panel View
RCH LCH POWER
DC 15V
CANARY HPA-1
8
9
8. RCA UNBALANCED ANALOG INPUT
9. POWER INPUT
Postive polarity

LEFT RIGHT GND L+ L- R+ R- GND
Headphone plug type
Standard 6.3mm stereo plug TRRS 4.4 mm balanced plug
Technical Specications
TRS 6.3 mm output power :
1.7W, 30 ohms, <0.0006% THD ( High gain mode).
150 mW, 300 ohms, <0.0007% THD ( High gain mode).
TRRS 4.4 mm output power :
1.7W, 30 ohms, <0.0006% THD ( High gain mode).
150 mW, 300 ohms, <0.0007% THD ( High gain mode).
GENERAL
Power Supply : DC 15V / 3A, Postive polarity.
Dimensions [W x H x D] : 151mm x 32mm x 90mm ( Volume
knob not included )
Weight : 335 g
Power consumption: Standby under 0.7W

Package content
The HPA-1 ( Black )
DC 15V / 3A Adapter
Power cord
Note :
Design and specications are subject to change without notice.
Illustrations in this manual might dier slightly from production
models.
RCA cable

PALAB Warranty Information Form
Name :
Telephone Number :
Address :
Purchase Date : /
/(DD/MM/YYYY)
Dealer’s Name :
Serial Number :
Important!
Please store this card in a secured location for future
reference. PALAB reserves the right to request this
document before accepting repair requests. This does
not aect or limit your mandatory statutory rights.

https://www.palabaudio.com