Palfinger P 250BK Quick start guide

Working diagrams
B1025_002_A_V3.docx Page 1of 8
Working diagrams
Palfinger P 250BK
on
MB Sprinter 3,5t / Iveco Daily 35S
The working diagrams shown below have the following preconditions:
Solid line:
Standard working diagram
Working height = height of basket bottom + 2.0 m
The basket is in basic position (not turned) and retracted
The following applies generally:
All specifications refer to standard aluminum basket without additional equipment
Maximum inclination 0,5°
Set-up inclination is max. 5° with automatic range adjustment.
Note on working diagram:
Additional attachments that deviate from the standard reduce range and basket load
Special baskets have different ranges
Reach at plastic workman basket ~ 0,5m - 0,8m reduced
Permitted maximum basket load according to technical description
The outreaches are approximate dimensions and depend on the chassis, the type of support
and the lifting platform’s additional equipment.
Illustrations of truck and unit are only of symbolic nature and do not allow any conclusions
regarding technical design.
Subject to technical change!

Working diagrams
B1025_002_A_V3.docx Page 2of 8
Palfinger P 250BK
Rear view
100%
100%
100%
100%
Front left
Front right
Rear left
Rear right
Extension of stabiliser
outrigger

Working diagrams
B1025_002_A_V3.docx Page 3of 8
Palfinger P 250BK
Top view
100%
100%
100%
100%
Front left
Front right
Rear left
Rear right
Extension of stabiliser
outrigger

Working diagrams
B1025_002_A_V3.docx Page 4of 8
Palfinger P 250BK
Left view
100%
100%
100%
100%
Front left
Front right
Rear left
Rear right
Extension of stabiliser
outrigger

Working diagrams
B1025_002_A_V3.docx Page 5of 8
Palfinger P 250BK
Rear view
0%
100%
0%
100%
Front left
Front right
Rear left
Rear right
Extension of stabiliser
outrigger

Working diagrams
B1025_002_A_V3.docx Page 6of 8
Palfinger P 250BK
Top view
0%
100%
0%
100%
Front left
Front right
Rear left
Rear right
Extension of stabiliser
outrigger

Working diagrams
B1025_002_A_V3.docx Page 7of 8
Palfinger P 250BK
Top view
0%
0%
0%
0%
Front left
Front right
Rear left
Rear right
Extension of stabiliser
outrigger

Working diagrams
B1025_002_A_V3.docx Page 8of 8
Palfinger P 250BK
Left view
0%
100%
0%
100%
Front left
Front right
Rear left
Rear right
Extension of stabiliser
outrigger