Palsonic TFTV806LED User manual

User’s Manual
TFTV806LED
80cm (31.5”) HD LED TV with DVB-T

I
Important safety information
Grounding information
This apparatus must be grounded. To ensure safe operation, the grounded plug must be
inserted only into a standard grounded power outlet which is effectively grounded through
normal household wiring. Extension cords used with the equipment must be hazardous
.The face that the equipment operates satisfactorily only means it is grounded, but the
installation may not necessarily be safe. For your safety, if in any doubt about the effective
grounding if the equipment or power outlet, please consult a qualified technician.
Product disposal
Do not dispose of the TV with general household waste. The LED screen contains a small
amount of liquid crystal and mercury. For disposal or recycling information, please contact
your local authorities.
Safety precautions
Please read all of these instructions before you operate yourtelevision and save these
instructions for later use. This unit has been engineered and manufactured to ensure your
personal safety, However, improper use can result in electric shock or fire hazards. In order
not to defeat the safeguards incorporated in this equipment, please observe the following
basic rules for its installation, use and servicing.
• Unplug this television equipment from the wall outlet before cleaning.
• Do not use liquid cleaners or aerosol cleaners. Use a softcloth moistened with water for cleaning.
• Use only the attachments recommended by the television equipmentmanufacturer.
•Do not use this television equipment near water-for example, near a bath tub, washbowl, kitchen sink
or laundry tub, in a wetbasement, or near a swimmingpool.
•Do not place this equipment on an unstable surface, stand, or cart. The television equipment may fall,
causing serious injury to a child or an adult, and seriously damage the equipment.
•When carrying the TV, hold it under the maim unit. Do not carry the TV by its speakers, Both the base
and the speakers could come off, causingyou to drop the TV, possibly resulting in damage to the TV
or causing injury.
•Television equipment and cart combination should be moved with care. Quick stops, excessive force,
and uneven surfaces when moving may cause the equipment and cart combination tooverturn.
•Shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit approved
by the manufacturer.
• Slots and opening inthe cabinet and the backor bottom are provided for ventilation. To ensure
reliable operation of the television equipment and to protect it from overheating, these opening must
not be blocked or covered. This television equipment should not be placed in an enclosed installa-
tion such as a bookcase unless proper ventilation os provided.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. TO AVOID ELECTRIC SHOCK, INSERT
TPLUG FULLY INTO THE POWER OUTLET.
CAUTION

II
•The openings should never be covered with a cloth or other material, and the bottom openings
should not be blocked by placingnear or over a radiator or heat source.
•This Television equipment should be operated only from type of power source indicated on the
marking label. If you are not sure of the type of power suppliedtoyour home, consult your
television dealer or local power company.
•As a safety feature ,this television equipment is equipped with a grounded power plug, If the plug
does not fit in your power outlet, contact your electrician. Do not modify the plug and defeat this
safety feature.
•Do not allow anything to rest on the power cord. Do not locate this television equipment where the
cord may be damaged due to lightning and power-line surges.
• Follow all warnings and instructions marked on the television equipment.
• If an outdoor antenna is connected to the television equipment, be sure the antenna system is
groundedso as to provide some protection against voltage surges and static charges.
•For added protection or this television equipment during a lightning storm,orwhen itis left
unattended and unused for long periods of time, unplugitfrom the wall outlet and disconnect the
antenna. This will prevent damage to the equipment due to lightning and power-line surges.
•An outdoor antenna system should not be located inthe vicinity ofoverhead power lines or other
electric light or powercircuits, or whereit can fall into such power lines or circuits. When installing
an outdoor antenna system, extreme care shouldbe taken to keep from touching such power lines
or circuits as contact withthem might be fatal.
•The mains plugor the appliance coupler is used asthe disconnect device, the disconnect device
shall remain readilyoperable. The mains plug is connected with the electrical outletwith safety
ground wire.
•Do not overload wall outlets and extensioncords as this can result in fireor electric shock.
•Never push objects of any kind into this television equipment through cabinet slots as they may
touch dangerous voltage pointsor short-circuit internal parts. This could result ina fire or electric
shock. Never spill liquid of any kind in the television equipment.
• Donot attempt to service this televisionequipment yourself as opening orremovingcovers may
expose youto dangerous voltage or other hazards. Refer all servicingto qualified service
personnel.
• Unplugthis television equipment from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
—When the power cordorplug is damaged orfrayed.
— If liquid has been spilled into the television equipment.
— If the television equipment does not operate normally by following the operating instructions.
Adjust only those control that are covered by the operating instruction as improper adjustment
of other controls may result in damage and will often require extensive work by a qualified
technician to restore the television equipment to normal operation.
— If the television equipmenthas been dropped or the cabinet hasbeen damaged.
—When the television equipmentexhibits a distinctchange in performance
— this indicates a need for service.
•UP on completion of any service or repairs to this television equipment ,ask the service technician
to perform routine safety checks to determine that the television is in safe operating condition.
•When replacement parts are required, make sure that the service technician has used
replacement parts specified by the manufacturer that have the same characteristics as the
original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
• Note to CATV systeminstaller: This note is to remind the CATV system installers that the cable
ground shall be connected to the grounding system of the building, as close to the point of cable
entry practical.

III
Handling the LED screen
•Do not leave the LED screen facing the sun as it can damage it. Take care when you
place the TV by a window.
•Do not push or scratch the LED screen. Do not place a heavy object on the LED
screen. This may cause the screen to lose conformity or cause LED panel
malfunctions.
• If the TV is used in a cold place, a smear may appear on the screen. This is not a
malfunction. The screen will return to normal as its temperature rises to a normal
operating level.
•If a still picture is displayed for a long time on the TV screen, ghosting may occur for a
while. The ghosting will eventually disappear.
• If the LED panel becomes warm during operation, this is normal and not a malfunction.
Handing of broken glass and liquid crystal leakage
If the LED panel is damaged, crystalline liquid leakage may occur, or scattered broken
glass may result. Do not touch broken glass or crystalline liquid (which is toxic). With bare
hands that have cuts, skin irritation or poisoning may result. If any crystalline liquid gets
into mouth or eyes, rinse thoroughly with and consult your doctor.
CAUTION:
IF the set is not going to be used for a long period, such as during a
vacation, unplug the set from the wall outlet to economise power.
(If the TV set is plugged in, a slight current still flows, even with the
power button in OFF position)
Handing of broken glass and liquid crystal leakage
IMPORTANT NOTICE
This product composes up to 6.0 million cells and a few cell defects may
occur In the manufacture of the panel. Several dead pixels (allow up to 2
bright or 2 dark pixels) on the panel are deemed acceptable by the industry
standards. In line with manufacturers and would not mean that the
panel is faulty. Dead pixels panels with 6 pixels or more within 12 month
period, Palsonic Corporation Pty Ltd. complies with industry standard
and reserves the right to repair the unit and non-refundable. We hope you
will understand that the product that corresponds to this standard is
regarded as acceptable.

IV
Overview of the LED TV..................1
Features..............................................1
Opening the packing.............................1
Product components.............................2
Side View............................................. 2
Rear View..............................................3
Remote control......................................4
Using the OSD menus..............................6
Picture Adjustment.................................6
Sound Adjustment...................................7
Channel Adjustment................................9
Lock Adjustment....................................12
Setup Adjustment..................................13
USB Operation......................................14
Specifications....................................15
Troubleshooting.................................16
Table of Content

Overview of the LED TV
Congratulation on purchasing the LED Television. This product has been designed
to provide you with a rich audio and video experience. This monitor enables you
to watch broadcast, cable television or channels, connect VCR, VCD or DVD play-
er to watch your favorite movies, or connect a computer to use the display as a
monitor. The TV is equipped with convenient control buttons and a handy remote
control to let you adjust the TV setting and customize the TV preferences through
an easy-to-use on screen menu system.
Features
Enjoy the versatility of your LED TV with its wide variety of features:
• Color active matrix TFT LED TV with remote control
• Safe, sturdy construction
• Audio / Video support:
— HDMI input
— PC input
— PC AUDIO input
— YPbPr input
— AV input
— RF input
— USB input
• On-Screen Display (OSD) menu system
• Built-in 2 speakers
When you unpack this LED TV, make sure the box contains the following items:
LED Color Television
Remote Control (with batteries)
User Manual
Warranty Registration Card
Quick Start Guide
If any of these items appears to be missing or damaged, please contact your vendor or authorised
service personnel for assistance.
Opening the packing
The following section describes the various components of the LED TV. Please
take a few moments to familiarize yourself with the product and control panel
before using it.
1
• Maximal resolution: 32” 1366 x 768

Product components
Front view
INPUT
Switch the input sources .
CH
Increase or decrease channel numbers.
MENU
Press the button to enter on screen Display (OSD).
VOL
Increase or decrease the volume.
POWER
Turn the TV on or off.
Remote Inductor and Power Indicator
2
IR Receiver
A soft blue light illuminates when the
television power is on.

Back view
3

•If direct sunlight shine directly on the remote sensor, remote control’s operation may be unstable,
and the effective range will be shorter.
• Do not hit or violently shake the remote control.
• Never expose the remote control to high temperature or humidity.
•If the remote is not used for an extended period of time, remove the batteries to prevent damage or
injury from possible battery leakage.
Remote Control
4

5
SNOITCNUFNOTTUB
1. POWER Turn the TV on or off.
8. INFO
9. CH.LIST
Exit the current menu.
Display a variety of information about current channel.
3.
5.
13.
17.
6.
29.
4.
25.
20.
SIZE You can change the picture size in the teletext mode.
23.
32.
27. TEXT Start the text mode.
28. CANCEL Videotext hidden button.
30.
12.
Press to scan in forword.
18. MUTE Disable the audio output.
10 .
24. AUDIO Select an audio source for the current programme.
21. MENU Enter or exit the OSD menu.
SLEEP Press the button repeatly to set the time to turn off the TV.
EPG
EXIT
Press to display electronic program guide menu.
16.
HOLD
Press to scan in reverse.
Hold freeze the current teletext page on the screen.
TV/R Select the TV/RADIO mode.
31. Press to display a list of favorite. FAV
Direction button.
7.
CH +/- Press +/- button to switch the channels.
22. OK Make sure the adjustment setted previously.
REVEAL
SUB
SOURCE
REC
Start the subtitle mode.
Display or remove the content that is hidden.
Display the submenu of the text.
Press the button to play or pause the current program.
Press to start recording.
Press the button to stop the current program.
To play the previous chapter, title or track.
14.
INDEX Display a list and information about the teletext pages.
To play the next chapter, title or track.
Switch to the previously viewed channel.
ASPECT
19.
Switch the screen ratio: auto, 4:3, 14:9, zoom1, zoom2.
Select the input source.
2. NUMBER
KEYS Press number keys to enter channel numbers.
Display the channel list.
11. COLOUR
KEYS Different input source has different functions.
26. NICAM Press repeatedly to cycle through the NICAM mode.
15.
SUBPAGE

Using the OSD MENU
The On-Screen Display (OSD) menu system provides a quick and simple method
to adjust LED TV base setting. OSD menu can be viewed using both the remote
control and the control buttons on the front panel.
6
Picture Adjustment
1. Press MENU button on the front panel or MENU button on the remote control to
display the main menu.
2. Press button on the remote control or button on the front panel to
select the Picture in the main menu, then press the or OK boutton, it will
highlihgt the first option.
CH+/-
3. Press button on the remote control or button on the front panel to
select the option you want to adjust in Picture menu.
4. Press button on the remote control to change the following settings.
5. Press the EXIT button to exit the menu.
VOL+/-
Cycles among picuture mode: Standard/ Mild/ Personal/ Dynamic.
Alternative: you may press the P.MODE button to select the picture
mode directly.
Adjusts the saturation of the color based on your own like. (For Personal mode)
Cycles among color temperature: Standard/ Cool/ Warm.
NR (Noise Reduction) Reduces the noise level of the connected device: Medium/
Strong/ Off/ Weak.
Dynamic Contrast Adjusts the dynamic contrast: Medium/ Strong/ Off/ Weak.
Allows you to watch the acreen in variours picture formats: Auto/ 4:3/ 16:9/
Zoom1/ Zoom2.
Adjusts the balance between red and green levels. (Hue is only available
for NTSC signal input via the SCART or AV IN.)
Adjusts the level of crispness in the edges between light and dark areas of
the pictures. (For Personal mode)
Adjusts the difference between light and dark levels in the pictures. (For
Personal mode)
Increases or decreases the amount of white in the picture. (For Personal mode)
Picture Mode
Brightness
Contrast
Sharpness
Saturation
Hue (For NTSC
format)
Color Temp
Aspect Ration
Advanced
Settings
Picture
Picture Mode
Brightness
Contrast
Sharpness
Saturation
Hue
Color Temp
Aspect Ratio
Standard
Standard
16:9
50
50
50
50
0
Move Adjust MENU: Return EXIT: Exit

7
Sound Adjustment
1. Press MENU button on the front panel or MENU button on the remote control to
display the main menu.
2. Press button on the remote control or button on the front panel to
select the Sound in the main menu, then press the or OK boutton, it will
highlihgt the first option.
CH+/-
3. Press button on the remote control or button on the front panel to
select the option you want to adjust in Sound menu.
4. Press button on the remote control to change the following settings.
5. Press the EXIT button to exit the menu.
VOL+/-
Allows the selection of an equalizer mode: Off / Rock / Pop / Jazz / User.
You can change the EQ under User mode.
Selects to turn On / Off Sourround Sound.
Adjusts the relative volume of the speaker in a multiple speaker system.
Controls the relative intensity of lower-pitched sounds.(For Personal mode)
Controls the relative intensity of higher-pitched sounds.(For Personal mode)
Allows the selection of an audio-enhancement technique: Standard/
Music/ Personal/ Movie. Alternative: you may press the S.MODE
button to select the sound mode directly.
Selects to turn On/Off Audio Volume Leveler.
Sound Mode
Treble
Bass
Balance
Surround Sound
EQ Setting
AVL
SPDIF Selects the digital audio output mode: PCM /Off /Auto.
Sound Mode
Treble
Bass
Balance
Surround Sound
EQ Setting
AVL
SPDIF
Standard
Off
On
Auto
0
0
0
Move Adjust MENU: Return EXIT: Exit
Sound

8
Channel Adjustment
Tuner Type
Auto Scan
Manual Scan
Channel Edit
Signal Information
Antenna
Move Adjust MENU: Return EXIT: Exit
Channel
Tuner Type
Auto Scan
Manual Scan
Channel Edit
Signal Information
Antenna
Move Adjust MENU: Return EXIT: Exit
Channel
1. Press MENU button on the front panel or MENU button on the remote control to
display the main menu.
2. Press button on the remote control or button on the front panel to
select the Channel in the main menu, then press the or OK boutton, it will
highlihgt the first option.
CH+/-
3. Press button on the remote control or button on the front panel to
select the option you want to adjust in Channel menu.
4. Press button on the remote control to change the following settings.
5. Press the EXIT button to exit the menu.
Allows you to set your preperred Tuner Type.
•Press the button to select Tuner Type and then press the button to
select: Antenna/ Cabel.
VOL+/-
Tuner Type

9
Use this to automaticallyh find and store all available channels. This is normally
recommended if some channels have been added or removed by the broaddcaster
or if you have moved house.
•Press the button to select Auto Scan and then press the OK button.
•In the Auto Scan menu, Press the button to select the country where
you will operate the TV and the auto scan mode: DTV+ATV/ DTV/ ATV. Press
the buttons to select Start and then press the OK button to start auto tuning.
•Press the button to select Manual Scan and then press the OK button.
•In the Manual Scan menu, you can select Digital Manual Scan or Analog Manual
Scan.
Auto Scan
Allows you to make manaul fine tuning adjustments to the channel.
Manual Scan
Tuner Type
Auto Scan
Manual Scan
Channel Edit
Signal Information
Antenna
Move OK: Select MENU: Return EXIT: Exit
Channel
Country
Mode
Start
Australia
DTV+ATV
Auto Scan
Move Adjust MENU: Return EXIT: Exit
Tuner Type
Auto Scan
Manual Scan
Channel Edit
Signal Information
Antenna
Move OK: Select MENU: Return EXIT: Exit
Channel
Digital Manual Scan
Digital Manual Scan
Manual Scan
Move OK: Select MENU: Return EXIT: Exit

10
In the Analog Manual Scan menu, Press
the buttons to select the following
options and the buttons to adjust
the setting.
Digital Manual Scan
Analog Manual Scan
•Press the button to select Channel Edit and then press the OK button.
Allows you to edit TV channel information in the Channel List.
Channel Edit
Analog Scan Displays the current frequency.
Channel to Save Displays the current channel number.
Color System Selects the color system: Auto / SECAM / PAL.
Sound System Selects the sound system: DK / I / BG.
AFC (Auto
Frequency
control)
Select AFC On to lock the desired frequency.
Start Press the OK button to start the manual tuning.
Digital Scan CH5
Start
Frequency 104.50Mhz
Strength 0
Digital Manual Scan
Move Adjust 0-9: Input MENU: Return EXIT: Exit
Annlog Scan 420.25MHz
Channel to Save CH001
Color System Auto
Sound System Auto
AFC Off
Start
Analog Manual Scan
Move Fine tune 0-9: Input MENU: Return EXIT: Exit
Channel Edit
Move Page OK: Select MENU: Return EXIT: Exit
Delete Skip Rename Move

11
Tuner Type
Auto Scan
Manual Scan
Channel Edit
Signal Information
Move OK: Select MENU: Return EXIT: Exit
Channel
a. Delete
Press the RED button to delete the selected channel.
b. Skip
Press the GREEN button to select channels that you want to skip when you are
selecting channels. Press the GREEN button again to undo it.
c. Rename
Press the YELLOW button to rename the selected channel. Press the
button to select the characters to represent the station name. press the
buttons to move to the next character and then press the OK button again to
confirm the new name.
d. Move
Press the BLUE button and then press the buttons to move to the
selected channel. press the BLUE button or OK button to confirm.
•Press the button to select Signal Information and then press the
OK button.
Allows you to view the signal information.
Signal Information

12
Lock Adjustment
Enter Password
Enable
Channel Locks
Parental Rating
Lock Keypad
New Password
Clear Lock
_ _ _ _
Off
None
Off
_ _ _ _
Move 0~9: Input MENU: Return EXIT: Exit
Lock System
1. Press MENU button on the front panel or MENU button on the remote control to
display the main menu.
2. Press button on the remote control or button on the front panel to
select the Lock System in the main menu, then press the or OK boutton, it will
highlihgt the first option.
CH+/-
4. Press button on the remote control or button on the front panel to
select the option you want to adjust in Lock System menu.
3. Use the 0-9 buttons to input a 4-digit password to enter the Lock System menu.
5. Press button on the remote control to change the following settings.
6. Press the EXIT button to exit the menu.
VOL+/-
Enabel
To access the Lock System menu, you must enter the password. Enter
the default password “0000” for the first time use.
The lock system is designed to prevent accidental returning of the TV/
losing channels and prevent children watching unsuitable programme.
The Lock System must be set to On for this function to operate. If the
Lock System is set to On, a valid password must be entered when you
access Auto Scan/Manual Scan/Channel Edit/Reset.
Reset all the lock settings to the factory defaults.
Use the 0-9 button to input the old password and then input the new
4-digit password. Re-enter new password for confirmation.
Channel Locks is designed to prevent children watching unsuitable
programmes. When a channel is blocked, a valid password must be entered.
Key Lock is designed to prevent children from pressing the buttons on
the TV. The Lock System must be set On for this function to operate.
This function allows you to set up blocking schemes to block specific channels
and ratings. Press the buttons to select an age rating: None,4-18.
Enter Password
Channel Locks
Parental Rating
Lock Keypad
New Password
Clear Lock

13
Setup Adjustment
1. Press MENU button on the front panel or MENU button on the remote control to
display the main menu.
2. Press button on the remote control or button on the front panel to
select the Setup in the main menu, then press the or OK boutton, it will
highlihgt the first option.
CH+/-
3. Press button on the remote control or button on the front panel to
select the option you want to adjust in Setup menu.
4. Press button on the remote control to change the following settings.
5. Press the EXIT button to exit the menu.
VOL+/-
Time Settings
Sleep Timer
Auto Sleep
Time zone
Time
Allows you to select your desired on-screen menu lanuage.
Allows you to select your desired audio lanuage.
Allows you to select your desired subtitle lanuage or turn off the subtitle.
Selects your desired digital teletext or decording page language.
Allows you to return to the first time setup menu.
Resets all settings to the factory defaults.
OSD Lanuage
Audio Lanuages
Subtitle
Teletext
Mode Setting
PVR Settings
Reset
First Time Setup
Selects your desired mode setting.
Selects your desired Time Zone city.
The clock is set automatically when receiving a digital signal or you
can set it manually.
• Home Mode: Viewing at home.
•
Store Mode: For store demo, the brightness is higher than home mode.
OSD Time Displays time of the on-screen menu:10s/20s/30s/60s/off
The TV auto switches to standby mode: Off/5Min/15Min/30Min/60Min...240Min.
The TV will auto switch to standby mode off/3H/4H/5H after the last time the
remote control was used.
OSD Language
Audio Languages
Subtitle
Teletext
Mode Setting
Time Settings
PVR Settings
First Time Setup
English
Home Mode
Move Adjust MENU: Return EXIT: Exit
Setup

14
USB Operation
Note：Before operating USB menu,Plug in USB device.
1. Press the INPUT button on the front right side panel of the TV or the SOURCE button
on the remote control, then press the /button to select the USB mode, and then
press the OK button.
2. Press /button to select Photo、Music、Movie or Text , then press OK button to enter.
Sub windows info:
PHOTO
MUSIC
MOVIE
TEXT
1. Press / button to select PHOTO in the main menu, then
press OK button to enter.
2. Press / button to select drive disk or picture folder you want
to watch, then press OK button to enter.
3. Press the EXIT button to return to the previous menu.
1. Press / button to select MUSIC in the main menu, then
press OK button to enter.
2. Press / button to select drive disk or music folder you want
to listen, then press OK button to enter.
3. Press the EXIT button to return to the previous menu.
1. Press / button to select MOVIE in the main menu, then
press OK button to enter.
2. Press / button to select drive disk or movie folder you want
to watch, then press OK button to enter.
3. Press the EXIT button to return to the previous menu.
1. Press / button to select TEXT in the main menu, then
press OK button to enter.
2. Press / button to select drive disk or text folder you want
to watch, then press OK button to enter.
3. Press the EXIT button to return to the previous menu.
Photo Music Movie Text

2 × 6 W
15
Active screen size 31.5 inches
Aspect ratio PC input
HDMI input 3
Response time
PC audio input
YPbPr input
Resolution AV input
RF input
Contrast
16:9
8ms
1366*768
150:1
1
1
1
1
1
Brightness 200 USB input
1
1
1
Coaxial output
Headphone output
Viewing angle 60/55(H/V)
TV Functions
Display I/O ports
Tuner 1
Number of channel 100
Standards B/G, D/K
Color system PAL, SECAM
AV
Progressive scan
3：2 / 3：2 pull down
Noise reduction
Audio mute
Audio
Other
60W
Dimensions (W*H*D)
Use manual
Packing size (W*H*D)
740mm×492mm×200mm
837mm×564mm×144mm
Gross weight 7.5Kg
Power consumption
Speaker
Return
Audio setting
Auto off
Sleep timer
Zoom mode 4:3, 14:9, Zoom1, Zoom2
Picture mode Dynamic, Standard, Mild,
Personal
OSD languages English, French, Deutsch,
Italian, Spanish, Portuguese
Sound mode Standard, Music, Movie,
Personal
Function