panas Omnivision PV-8405S User manual

Thank you for choosing _ _i •_ '
Panasonic
OmnlvIsIon _
Video Cassette Recorder
I
r" t"-,,
.J
MODEL PV-8405S
Operating
Instructions
As an ENERGY STAR ePartner,Matsushita Electric
Corporation of America has determined thatthis
_uct orproduct model meets the ENERGYSTARe
guidelines for energy efficiency.
Please read these instructions carefully before attempting to
connect, operate or adjust this product. Please save this manual.
Spanish Quick Use Guide is included. (Gui'a_para rdpida consulta en esp'-a_olest& includo.)
Quick Use Guide is on the back cover.
VQTS3473 (A)

Thin s You Should Know
Congratulations
onyourpurchaseofoneofthe mostsophisticatedand
reliableproductson themarkettoday.Usedproperly,it
willbringyouand yourfamily yearsofenjoyment.
Pleasefillintheinformationat right.The serialnumber
isonthe lag locatedonthe backofyourVCR.
_Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No
Model No. PV-R4nR_
Serial No.
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
This video recorder, equipped with the HQ (High Quality) System, iscompatible with existing VHS equipment.
Only use those tapes with the _] mark. It is recommended that onlycassette tapes that have been tested
and inspected for use in 2, 4, 6, and 8 hour VCR machines be used.
I FCC Warning:Anyunauthorizedchangesor modificationstothis equipmentwouldvoidthe user'sauthoritytooperate. I
This symbolwamsthe userthatuninsulatedvoltagewithinthe unitmay
have sufficientmagnitudetocauseelectricshock.Therefore, itisdangerous
tomakeanykindofcontactwithany insidepartofthis unit.
This symbolalertsthe userthatimportantliteratureconcerningthe operation
and maintenanceofthis unithasbeen included.Therefore,itshouldbe read
carefullyinordertoavoidany problems.
f
Table of Contents
Important Safeguards and Precautions ............................................................................................. 3
Unpacking Your VCR •Product Features ......................................................................................... 4
VCR and Cassette Information (RecordTab, Tape Speeds,Head Cleaning,DST., Specifications)................... 5
Basic Connection (Antenna and VCR, VCR and TV) .............................................................................. 6, 7
Other Connections (CABLE, AudioNideo) ........................................................................................... 8, 9
rma ml'd
Location of Controls (RemoteControl,VCR) ................................................................................... 10, 11
One Time VCR Setup (On-ScreanLanguage,ChannelMemory,AutoClockSet) .................................. 12 - 14
On-Screen Displays (OSD) (Function,Channel,Menu,VCR Status&Clock,Warning) 15
I|]PII_fU[1_p_lttilfffll
Playback a Tape (Main Operation,Special Effects,QualityPictureFeatures).............................. ................... 16
Record On a Tape (Main Operation,OneTouch Record,ChannelSelection) 17
Timer Recording (MainOperation,Cancel, Clearor ReplaceProgramContents)..................... ,................ 18, 19
10011ttlqO111[aH111II_
Tape Operation (IndexSearch, AutoFunctions,One MinuteSkip,RepeatPlay,Zero Search) ................... 20 - 22
.Copying Your Tapes (Dubbing) (Connection, Main Operation,Monitoring,SelectInputMode)....................... 23
Multi-Brand Control Feature ....................................................................................................... 24, 25
Special VCR Features (VCR Lock,Blue BackON/OFF, WarningBeePer) ................................................... 26
[]B]RI_ _Bllltt1_ltml
W=.arranty ............. ................................................................................ .._........................................... 27
Before Requesting Service (Self-checkitems)................................................................................ 28, 29
Spanish Quick Use Guide .......................................................................................................... 30, 31
Quick Use Guide ................................................................................................................. Back Cover
2

ImportantSafeguardsandPrecautions
FOR YOUR SAFETY, READ AND RETAIN
ALL SAFETY AND OPERATING IN-
STRUCTIONS. HEED ALL WARNINGS IN
THE MANUAL AND ON THE UNIT
INSTALLATION
I
1 POWER SOURCE CAUTION
Operate only from a power source indicated on the
unit or in this manual. If necessary, have your Electric
Utility Service Company or Video Products Dealer verify
the power source in your home.
2 POLARIZED OR GROUNDING PLUG
As a safety feature, this Video product comas with either
apolarized power cord plug (one blade is wider than the
other), or a three-wire grounding type plug.
POLARIZED PLUG CAUTION:
This plug will only fit into an outlet one way. If you cannot
fully insert the plug, try revemlng it. If it still will not fit, have
an electrician install the proper wall outlet. Do not defeat the
safety feature bytampering with the plug.
GROUNDING PLUG CAUTION:
This plug will only fit into a three-hole grounding outlet. If
necessary, have an electdcian Install the proper outleL Do
not defeat the safety feature by tampering with the plug.
3 POWER CORD
Make sure power cords are routed so that they are not
likely to have anything rest on them, roll over them, or be
in the way of walking traffic.
If an extension cord is used, make sure it also has either
apolarized or grounded plug and that the cords can be
securely connected.
Frayed cords, damaged plugs, and damaged or cracked
wire insulation are hazardous and should be replaced by
a qualified service technician.
Overloaded outlets and extension cords are fire hazards
and should be avoided.
4 DO NOT BLOCK VENTILATION HOLES
Ventilation openings in the cabinet release heat
generated during operation. If they are blocked, heat
build-up inside the unit can cause failures that may result
in a fire hazard or heat damage to cassettes.
For protection, follow these rules:
a. Never cover ventilation slots or the unit while in use,
or operate the unit'when placed on a bed, sofa, rug,
or other soft surface.
b. Avoid built-in installation, such as a book case or
rack, unless proper ventilation is provided.
5 AVOID EXTREMELY HOT LOCATIONS OR SUDDEN
TEMPERATURE CHANGES
Do not place the unit over or near any kind of heater or
regulator, in direct sunlight, inside a closed vehicle, etc..
Do not move the unit suddenly between areas of
extreme temperature variation. If the unit is suddenly
moved from a cold place to a warm place, moisture
may condense in the unit and on the tape.
6 TO AVOID PERSONAL INJURY
•DO not place unsecured equipment on a sloping
surface. -- "
•DO not place this unit on any support
that is not firm, level, and adequately
"strong. The unit could fall causing
,seriousinjury to a child or adult and
damage to the unit.
• An appliance and cart combination
should be moved with care,
Quick stops, excessive force, and
uneven surfaces may cause the
appliance and cart combination to overturn.
•Carefully follow all operating instructions and usa
the manufacturer's recommended accessories
when operating this unit or connecting it to any
o'ffler equipment.
I
1
OUTDOOR ANTENNA INSTALLATION I
SAFE ANTENNA AND CABLE CONNECTION
If an outside antenna or cable system me.ram. _:.-
_€0€11
is connected to the equipment, _-,_.
be sure the antenna or cable system ,_
is grounded so as to provide soma /_ ._
protection against built up static /_,
charges and voltage surges. _ • I,_--,_,N
Section 810 of the National I _j m;_m,m
Electrical Code, ANSI/NFPA 70 I _IJ"_,m=_,
(in Canada, pert I of the Canadian L_ -'-_..._J/* ! m= ,_
Electdcal Code) provides information _ _ _,==u=,,
with respect to proper grounding of the _'-J"r._zz_-moee'ewm_m
mast and supporting stnJcture, grounding _,,€_,,,L,.,_
of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna discharge unit, connection
to grounding electrodes and requirements for the grounding electrode.
KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER LINES
OR CIRCUITS
An outside antenna system should be located well away from power lines,
electric light or power circuits and where it will never come into contact with
these power sources if it should happen to fell. When installing an outside
antenna, extreme care should be taken to avoid touching power lines,
circuits or other power sources as this could be fetal. Because of the
hazards involved, antenna installation should be left to a professional.
J USING THE VIDEO UNIT
i
If the unit has been in storage or moved to a new location,
refer first to the INSTALLATION section of these safeguards.
1 KEEP THIS VIDEO UNIT AWAY FROM WATER OR
MOISTURE OF ANY KIND.
2 IF EQUIPMENT IS EXPOSED TO RAIN, MOISTURE, OR
STRONG IMPACT, unplug the unit and have it inspected by a qualified
service technician before use.
4
I
1
DURING AN ELECTRICAL STORM
Dudng a lightning storm, whether indoors or outdoors, or before leaving the
unit unused for extended periods of time, disconnect all equipment from the
power source as well as the antenna and cable system.
WHEN THE UNIT IS PLUGGED IN
•Never expose the unit to rain or water. DO NOT OPERATE if liquid has
been spilled into the unit. Immediately unplug the unit, and have it
inspected by a service technician. Fire and shock hazards can result from
electrical shorts caused by liquidcontact inside.
•Never drop or push any object through openings in the unit. Some internal
parts carry hazardous voltages and contact can cause electric shock or
fire hazard.
• Avoid placing the unit directly above or below your TV set as this may
cause electdcal interference. Keep all magnets away from electronic
equipment.
USING ACCESSORIES
Use only accessories recommended by the manufacturer to avoid risk of
fire, shock, or other hazards.
CLEANING THE UNIT
Unplugthe unit.Then, usea clean,dry,chemicallyuntreatedclothtogently
removedustordebds.DO NOTUSE cieanlng fluids,aerosols,orforcedair
thatcouldover-spray,orseepintothe unitand cause electricalshock.
Anysubstancesuchas wax,adhesivetape, etc. maymar the cabinet
surface.Exposureto greasy,humid.ordustyareasnlay adverselyaffect
internalparts.
SERVICE J
DO NOT SERVICE THIS PRODUCT YOURSELF
If, after carefully following the detailed operating instructions, this Video
product does not operate properly, do not attempt to open or remove covers,
or make any adjustments not described in the manual. Unplug the unit and
contact a qualified se_ca technician.
IF REPLACEMENT PARTS ARE REQUIRED
Makesuretheservicetechnicianusesonlypartsspecifiedby''the:_,
or thosehavingthesamesafetycharacteristics,astheoriginalparts.Theuseof
unauthorizedsubstitutesmayresbit-lnfire,eiac1_cshock,orotherhazards.
HAVE THE SERVICE TECHNICIAN PERFORM
A SAFETY CHECK
After any service or repairs to the unit, request the service technician to
conduct a thorough safety check as described in the manufactura's service
literature to insure that the video unit is in safe operating condition. 3

Unpacking Your VCR • Product Features
Unpacking Your VCR
The accessoriesbelowareprovidedto help
youuseorset upyourVCR.
Accessories
I
'_OOl
RemoteControl
VSQS156O
2=AA '_
Batteries
RF Coaxial
Cable
VJAS0196
Loading the Batteries
1Pressinandup onthe
latchwithyourthumb
nailandliftoffthelid.
2Install two batteries as
indicated inside the
Battery Compartment.
3Fit the lid's hinge piece
intothe indent on the
case, and snap the lid
into place.
Battery replacement caution
• Do not mix old and new batteries.
- Do not mix alkaline with manganes_ batteries.
Product Features
All Channel Auto Set/181-CH TV/CABLE Tuner .................................................................... 12 - 14
Auto Clock Set ......................................................................................................................... 12 ~ 14
Auto Daylight-Saving Time ................................................................................................................. 5
Auto Features for a Quality Picture .................................................................................................. 16
Auto Operation Functions (Auto Playback, Rewind, Tape Eject, Power off) ................................................... 21
Auto Repeat Function ...................................................................................................................... 22
DigitalAuto Picture.........................................................................................................................................16
Easy-to-Read English/Spanish/French On-Screen Displays ..................................... 12 ~ 14, 18, 19
Head Cleaner ..................................................................................................................................... 5
Multi Brand TV/Cable Box/DSS Remote Control ..................................................................... 24, 25
One Minute Skip ........................................................................ "......................... .:.......................... 22
One Month, 8 ProgramTimer Rec(_rding................ ............. _..................................................... 18, 19
One Touch Recording (OTR) ........................................................................................................... 17"
Program Director Remote Control ............................................................................................. 18, 19
"Special Effects Playback .................................................................................................................. 16
Special VCR Features (VCRLock,BlueBackON/OFF,Waming Beeper) ..................................................... 26
Timer Recording Using VCR Buttons .................................... ._........................................... .. .......... 19
VHS Index Search System (DirectAccessSearch,IndexScanSearch)................................................ 20, 21
Zero Search ................................................................................................................................... 22
4

VCR and Cassette Information
Erase Protection (Record Tab)
Cassettes have a record tab to ensure that
recordings are not accidentally erased.
To prevent accidental erasure,
break off _with a screwdriver.
To record again, cover the
hole with cellophane tape.
/
Reset all VCR Memory Functions ]
Use when moving the VCR to a new location, or if a
mistake was made in the One Time VCR Setup section.
•Make sure a tape is not inserted in the VCR.
1) Turn VCR Power on.
2) Press and hold both PLAY and CHANNEL • on_t_ '
VCR for more than 5 seconds.
•Thepowerwillshutoff.
3) Perform the One Time VCR Setup section on page 12.
Maximum Record/Playback Time ]
Only use tapes with the _ mark in this unit.
Type of Video Cassette
Tape Speed
Setting T60 T120 T160
SP 2 Hours
(Standard Play) 1 Hour 2 Hours 40 Minutes
LP 5 Hours
(Long Play) 2 Hours 4 Hours 20 Minutes
SLP
i(SuperLongPlay) 3 Hours 6 Hours 8 Hours
Build-in Head Cleaner 1
A clean video head helps produce a clear picture.
So, we have equipped your VCR with a built-in, non
chemical head cleaning system that helps prevent clogging
of the video heads. Cleaning is performed each time you
load or unload a video_cassette.
Note: This feature is preventative only. If your video heads
are seriously clogged, consider the use of a
chemical nonabrasive head cleaning kit or take your
VCR to a Service Center.
Head Cleaning
Your VCR will not normally require head cleaning,
however, the heads may become clogged when playing
an old or damaged tape.
Video Heads Sensor S_;stem
If head cleaning becomes
nece=ssary,the VCR will display
thescreen shown to the dght vmso HEADSMAY
NEED CLEANING
while playing back a Video Tape. PLEASEINSEmHE_U_
TOexit this screen, push PLAY CLEXmNGC_sETrE
OR REFER TO MANUAL
on the remote control or VCR.
• Use "dry" type head END:PLAY KEY
cleaning cassette*only.
, Besureto followthe cleaningtape inst_ carefully.
Excessiveuseof a cleaningcassette can shortenhead life.
•If usinga head cleaningcassettedoes notsolvethe problem,
contactyournearestFactoryServiceCenterorauthorized
ServiceCenter.
" Cleaningcassette partNo.NV-TCL30PT isrecommended.
D.S.T. Saving Time)
(Daylight
Your VCR can be set to automatloally adjust the clock for
Daylight Saving Time. (Page 13.)
Spring (First Sunday in April)
When set to DST:ON, the VCR will automatically set the
clock ahead one hour.
Autumn (Last Sunday in October)
When set to DST:ON, the VCR will automatically set the
clock back one hour.
• If your area does not observe Daylight Saving Time,
select DST:OFF.
•Keep these time changes in mind when programming
the VCR for timer recordings.
]
Specifications ]
Power Source:
Power Consumption:
Video Signal:
Video Rd_ording System:
Audio Track:
Tuner:
Broadcast Channels:
CABLE Chanriels:
OperatlngTemperature:
Opemtlng Humidity:
Weight:
Dimensions:
120VAC, 60 Hz
Approx.18watts(Poweron)
Approx.3.5 watts(Poweroff)
EIA StandardNTSCcolor
4 rotaryheadshelical
scanningsystem
1track(Normal)
VHF 2-13, UHF 14-69
Midband A through I (14-22)
Superband J through W (23-36)
Hyperband AA-EEE (37-64)
Lowband A-5-A-1 (95-99)
Special CABLE channel 5A (01)
Ultraband 65-94, 100-125
41°F- 104°F (5°C-40°C)
10%-75%
7.5 Ibs. (3.4 kg)
14-15/16" ON) x 3-2/3" (H) x
12-3/16" (D)
380 (W) x 93 (H) x 310 (D) mm
Note: Designsandspecificationsare subjectto change
withoutnotice. 5

Basic Connection
INDOOR _ OUTDOOR_
ANTENNA ANTENNA
\
or or
Cable[@TV ]
/
1Disconnect the antenna or
cable from your TV and connect
itto the VCR (IN FROM ANT.)
Antenna Cable
3Set the Output Channel of your VtCR
tO channel 3 or 4 (whichever is not being
transmitted on by a Local TV broadcast).
RF Coaxial Cable
(VCR-TV Connection Cable) (supplied)
2Connect the VCR to yourTV with
theRF Coaxial Cable(OUT TO TV).
W'ARNING _
When using "Nuttype" RF coaxial cables, tighten with fingers only.Overtightening may damage terminals.
6

Case 1: Twin Lead Cable Only
To VCR Terminal
(Flat)TwinLead 300-75 ohmTransformer
300 OhmCable (notsupplied)
Case 1: Screw & Plug Type Terminal
UHF/VHF Band
Separator
(notsupplied)
TV
RF CoaxialCable UHF
Case 2: Twin Lead & Coaxial Cables
JHF/VHF
Band Mixer
(notsupplied)
(Round) 75 Ohm
coaxial Cable To VCR Terminal
Case 3: Two Twin Lead Cables
Case 2: Screw Type Terminal
75-300 ohm
Transformer
(notsupplied)
TV
Case 3: Double Screw Type Terminal
TV
UHF/VHF Band
Separator
(notsupplied)
,VHF
or
UHF
VHF
UHF
300-75 ohm
Transformer
(not supplied)
UHFNHF
Band Mixer
(notsupplied)
To VCRTerminal
• If_,,our"IVhas bothpostandplug-typeVHF
terminals,the postconnectionisrecommendedto
minimizesignalloss.
Case 4: Complex TV Terminal
TERMINALSONBACK OF TV SET€
Split out --
TV
ANT2
•ConnecttooneoftheANTterminalsandselectthe
sameantennanumberontheTV.
7

Other Connections
All connections on these pages are made with 75 Ohm coaxial cables.
JWithout a Converter/Descrambler Box I
You can:
1) Use your VCR Remote Control to select channels.
2) Program one or more unscrambled channels for
unattended recording.
You cannot:
record or view scrambled channels with this connection.
IN FROM
CABLE
VCR IN FROM ANT.
VHF_HF
TV
I With a (CABLE to VCR) Converter/Descrambler Box I
You can: CableTV
1) Record and view any channel including ConvertorBox
scrambled channels; channel selection must
be made at the Cable TV Converter Box. IN FROM
2) Program one channel for unattended CABLE
recording.
You cannot:
select channels from VCR or TV.
watch one station while recording another.
place channels in memory (pg.12) other than the cable box outputchannel.
l With a (VCR to TV) Converter/Descrambler Box
Youcan:
1) UseyourVC_ RemoteControltoselectchannels.
2) Programunattendedrecordingsof morethan
one unscrambledchannel.
You cannot:
recordscrambled channels with this connection.
VCR
IN FROM
CABLE
Cable TV
Converter Box IN
I With Two Converter/Descrambler Boxes I
If you want to record and
view a combination of
scrambled and
unscrambled channels,
you will need additional
equipment.
This connection requires
two'converter boxes, an
A/B switch, and a 2-way
splitter as shown here.
IN FROM
"IV CABLE
OUT /VB Switch
8
2-Way
Splitter
OUT TO "IV
IN FROM ANT.
VHF_HF
IN FROM ANT.
OUT
r
ConverterBox 1
VHF_HF
IN FROM ANT.
TV
VCR
OUT TO TV

IWith a DSS Receiver I
You can:
1) Recordand viewanychannelincluding
scrambledchannels;channelselection
mustbe madeattheDSS Receiver.
2) Programonechannelfor unattended
recording.
NOTE: The DSS receivermustbe turnedoffto
viewpmgrarnsfrom a cableboxor
antenna.See the DSS manualfor details.
INFROM
CABLEorAntenna
DSS
IN FROM
Satellite Dish
IN FROM ANT.
**DSS_) is a registered trademark of DIRECTV, INC., a unit of GM Hughed Electronics.
OUTTOTV
VHF/UHF
Audio/Video Connections I
If yourTV hasAUDIO IN andVIDEO IN terminals,youcan connectyour
VCR tothemtoreceivea higherqualitypictureandsound.IfyourTV isnot
stereo,youcanconnecta stereoamplifiertothe VCR toenjoystereosound.
FROMANT _,
) IN
1Connect the VIDEO OUT terminal on the VCR to the VIDEO IN terminal ofyour TV.
2 Connect the AUDIO OUT terminals on the VCR tothe AUDIO IN terminals of your TV.
3 Set the VIDEO/TV selector of your TV (Monitor/Receiver) to =VIDEO."
NOTE: To useyourTV asa VCR monitor,set the VIDEO/TV selectoronthe TV (Monitor/Receiver)to=VIDEO."
NotetoCABLEsysteminstaller:.
Thisreminderisprovidedtocall the CABLEsysteminstaller'sattentiontoArticle820-40_0.Jthe NEC inUSA (andto the
CanadianElectricalCodein Canada)thatprovidesguidelinesfor propergroundingand,inparticular,specifiesthatthe
cable groundshallbe connectedto the groundingsystemofthe building,ascloseto the pointof cableentryas practP..al.
9

Location of Controls
VCR
See pages 24° 25.
POWER
See pages 12, 18, 19, 24, 25.
VCR/TV
See pages 12, 17, 23, 25.
PLAY
See pages 16, 21,25.
SELECT UP
See pages 13-15, 18, 19, 22, 26.
REWIND/SEARCH
See pages 16, 20, 21, 25.
SET/BACKSPACE
See pages 13, 14, 18, 19.
ACTION
See pages 13-15, 22, 26.
PAUSE
See pages 16, 17, 23, 25.
NUMBERED KEYS
See pages 14, 17, 20, 24, 25.
DISPLAY/ENTER
See pages 15, 17, 22, 25.
INDEX
See pages 20, 21.
SPEED
See pages 17, 25.
COUNTER RESET
See pages22, 25.
OQC
OQQ
O®
TV
See pages 24, 25.
DSS/CABLE
See pages 24, 25.
INPUT
See pages 17, 23, 25.
FAST FORWARD/SEARCH
See pages 16, 20, 21, 25.
SET
See pages 13-15, 18, 19, 22, 26.
STOP
See pages 14, 16, 17, 19, 21, 25.
SELECT DOWN
See pages 13-15, 18, 19, 22, 26.
PROGRAM
See pages 18, 19.
RECORD/TIME
See pages 17, 25.
SLOW
See pages 16, 25.
•ADD/DELETE
See pages 14, 19.
CHANNEL UP/DOWN
(TRACKING UP/DOWN)
Sea pages 12-14, 16, 17, 23, 25.
VOLUME UP/DOWN
See page 25.
ZERO SEARCH/
1 MINUTE SKIP
See pages 22, 25.
STOP/EJECT
See pages
16, 17, 19, 21, 23, 25.
POWER
See pages
12, 18, 19, 25.
Cassette Compartment
See pages 16, 17, 23. REWIND/SEARCH
See pages 16, 19, 20, 21, 25.
CHANNEL UP/DOWN
TRACKING/V-LOCK
Seepages 12, 16, 17, 23,25.
10
Multi Function Display
See pages 11, 16~19, 23.
REMOTE
SENSOR
PLAY
See pages
16, 19, 21,23, 25.
FAST FORWARD/
SEARCH
See pages 16, 19, 20,
21, 25.
RECORD/TIME
See pages
17, 19, 23, 25,
26.
VCR/TV Selector
See pages 12, 17, 23, 25.

VCR Indicator
Lights when the VCR/TV
selector is set to VCR.
Power Indicator _VCR
Lights when power is on. IJ I
Timer Indicator
Lightswhen the VCR isset for a
Timer Recording, or when a length
isset fora normal recording (OTR).
Flashes when a Timer Recording is
set, buta tape has notbeen
inserted into the VCR.
Clock/Status/Channel/Speed Display
Displays the current time.
Briefly displays VCR status when a function button is pressed.
Briefly displays the channel number, or "L"when a channel or line
input is selected.
Briefly displays the recording speed when SPEED ispressed.
AC Power Plug
While plugged into an AC outlet, the
VCR consumes 3.5 W of electrical
power in OFF condition.
Audio Output Connector
See pages 9, 23.
Video Output Connector
See pages 9, 23.
VHF/UHF Antenna
Input Terminal
See pages 6-9.
€J
VHF/UHF Antenna
Output Terminal
See pages 6-9, 23.
Audio Input Connector
See page 23.
Video Input Connector
See page 23.
Channel 3/4 Switch
See_pages 6, 12.
11

One Time VCR Setup
*Important: If the remote control POWER, ACTION, PROG, CH&/V, INDEX or ADD/DLT button does not
work when pressed, press the VCR button on the remote and try the button again.
When the VCR is tumed on for the first time, it automatically enters the setup mode.
Setup includes the following:
•Choosethe languagefor on-screenmenusand messages.
•TelltheVCR howyourequipmentis hookup(pages6-9) so theVCR cancorrectlyplacechannelsintomemory.
•Get theVCR readyforclockset.
1 4
3 2
To Set the Language, Channels
and Auto Clock
1Turn the TV and VCR on.*
2Tune your TV to the VCR output channel
(the same one you set on the back of the VCR: CH3 or CH4).
•If you used audio/video jack connection, tune the TV to its
video input.
1
Using &V4 I_ keys ,,_,_,A
When amenu screen is displayed, < _::3_C>)
the PLAY, STOP, REWIND, and FF
buttonson the remote controlfunction _F
as&V<l• only. Use the buttons on the VCR for
play,stop, rewind, and fast forwardfunctions.
When a program screen isdisplayed, the REC, FF,
REW, end PLAY buttonson the remote controland
the VCR function as &V<I •only. (See Timer
Recording Using VCR Buttons on page 19.)
12
3Press CH • for English
on-screen displays.
Or, press CH •for Spanish
on-screen displays.
Or, press VCR/TV for French
on-screen displays.
OPRIMIR VCR CH V:ESPAI_IOL I
•VCRIW : FRANq^ISJ
•YOUcan also set the language usingthe buttons on the VCR.
• If wrong language is set, see the =Reset all VCR Memory
Functions"section on page 5.
• The VCR should be connected to an antenna or cable
box (page 6-9).
4Press CH •to start Channel
Auto Set and Clock Auto Set.
• The following messages appear:.
"CH AUTO SET PROCEEDING"
"AUTO CLOCK SET PROCEEDING"
_: or
CH/_ELICLOCI(AUTOSET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX, TUNE IT TO YOUR
LOCAL PBS CH THEN...
PLEASE PUSH CH UP KEY
11412000TUE12:00PBl
DST:ON
SETTING : CH 0_
AUTO CLOCK SET
COMPLETED
END : PUSH CH UP KEY
I
AUTO CLOCK SET I
I
IS INC(_/PLETE
PUSH ACTION TO SET CLOCK
* If you are using the CABLFJDSS BOX•VCR•TV connectionmethod,
only the cable box output channel willbe placed in memory.

Ifthe displayed time is correct,
press CH • to exit.
* Thisconcludesone time VCR setup.
• See importantnoteat the bottom of this page.
If the displayed time and DST. are not correct...
If you happen to live close to two time zones, the
VCR may have recognized the PBS channel (setting
channel) in the wrong time zone. Please do the
• following to correct the situation.
aMake a note ofthe SEI-rlNG:CH number shown
on-screen and press CH • to exit.
b Delete the setting channel from the VCR channel
memory. (See "To Add or Delete a Channel"
section on page 14.)
c Press ACTION to display the menu.
d Press AY to select =SET CLOCK," and then
press •to display the =SET CLOCK" screen.
•Press •V to select =AUTO CLOCK SET," and
then press • to display the "CLOCK AUTO SET"
screen.
Press CH • to start Clock Auto Set.
• If you use a cable box and have multiple PBS stations,
tune the cable box to a different PBS station and try
auto clock set using the menu.
SELECT/SET
(A,,4),)
keys
CHANNELUP
Ifthe screen above appears, auto clock set
is not available in-yourarea. Please set the
clock manually as described below.
a PressACTIONtodisplay
the"SET CLOCK"screen.
bPress•T and_ • to
selectand setthe month,
date,year,time, and DST.
(DaylightSavingTime).
I SELECT:& •KEY
I SET :=. K_'
END :ACTION KEY
• See page5 formore
on DST.
To Make Corrections, -- -t
repeatedlypress"4• to movethecursortothe
incorrectentryand makethe correction.
c Press ACTION twice to
start th_ clock and exit
this mode.
SET ,t J. K_Y
START :ACTION
IMPORTANT NOTE FOR AUTO
CLOCK SET
•AUto clockset willbe performed when
the VCR is tumed off the first time each
day. If you use a cable box and you
want auto clockset to be performed, the
cable box must be left on and tuned to
the PBS channel before the VCR power
is tumed off.
•If you use a DSS receiver, it must be
tumed off for auto clockset.
•If you use AudioNideo Jack connection
between the VCR and Cable Box or
DSS receiver° you must also connect
the RF coaxial cable in order to use the
auto clock set and channel auto set:'_'°
features.
13

One TimeVCR Setup
*Important: Ifthe remote control POWER, ACTION,
PROG, CH&/•, INDEX or ADD/DLT
button does not work when pressed,
press the VCR button on the remote and
try the button again.
STOP
SELECT/SET
(AV< I_) keys
ACTION
NUMBERED
keys
ADD/
DELETE
100 key
CHANNELUP
To Replace Channels in Memory
Incaseyouhavecableinstalled,etc.
1Press ACTION* to display
the menu.
2Press AV to select =SET
UP CHANNEL," and then
press •to displaythe
=SET UP CHANNEL" screen.
3Press &V to select
"ANTENNA," and then
press •to set your antenna
system (TV or CABLE).
4Press AV to select =AUTO
SET," and then press •
to display the "CHANNEL
CLOCK AUTO SET" screen.
•Ifyouusea cablebox,tum
itonandsetitto thePBS
channelinyourtimezone.
•Toexitthismode,
pressACTIONtwice.
5 Press CH •to start
Channel Auto Set.
......... MENU .........
SET UP VCR
_ENGL ISH
SELECT:& •KEY
SET :m. KEY
END :ACTION
I... ,sEt UP CHANNEL---,JI SELECT:& •
I SET :=, KEY
ENO :ACTION KEY
[ CHANNELICL_AUTOSET
CONNECT _CABLE
AND IF YOU USE A CABLE
BOX, 'RJNE IT TO YOUR
LOCAL PBS CH THEN...
PLEASE PUSH CH UP KEY
•Clock Auto Set will be performed when channels are
replaced in memory. To cancel, press STOP when
"AUTO CLOCK SET PROCEEDING" appears on-screan.
To Change On-Screen Display Language
1Press ACTION to display
the menu.
2 Press AV to select
the language.
English: LANGUAGE
Spanish: IDIOMA
French: LANGUE
MENU .........
SET UP VCR
SET CLOCK
SEL_:CT:A • KEY
SET :lb KEY
END :ACTION KEY
3Press •rep.eat,edly to change the language.
MENU .... _r i_ MENU .... •
SET UP VCR ......... MENU .........
sETCLOCK /P,R,E,_ R LeQL*Ge--ETOSCO_
/r:':;; _.,_ IREGLAGEHORLOGE
maammam_,s_. =_dREGLA__L
SELECT'*• KEY _--'1 "meme'mBmm:F_ms
SET ;i_ KEY I ELEGIR:& • =
ENO ;ACTION KEY FIJAR :1_ RSEELG,_ERI: •
4Press ACTION to exit this mode.
To Add or Delete a Channel
1Select a channel using-{he c._ o8,Boeo
NUMBERED keys to add
,,or CH A/• to delete.
CHANNEL 06 DELETED
2Press ADD/DLT to add
or delete the channel.
• To selecta channel
onceit'sdeleted,
usethe NUMBERED keys
_on theremotecontrol.
14
To Set or Reset the Clock
Incase the clockiswrong,ora powerfailureoccurred.
1Press ACTION to display
the menu.
2Press A• to select =SET
CLOCK," and then press •
to display the =SET CLOCK"
screen.
3Press A• to select
=MANUAL," and then press
•to display the SET
CLOCK screen.
4
5
......... MEND ......... •
EL
I0 IOMAI LANGUE: ENGL I SH
SET CLOCK ......
AUTO CLOCK SET
SELECT :A •
SET :lb KEY
END :ACTION KEY
Press A• and • • to select
and set the date, time and
DST. (DaylightSaving Time).
Press ACTION twice to
start the clock and exit
this mode.
ForAutoClockSet,select"AUTO(_LOCK
SET,"andthen pressCH•instep3.
When Using the 100 key
When selecting CABLE channels 100 to 125 with the
NUMBERED keys, first press the 100 key and then
enter the remaining two digits. ._
For example, to select channel 125:
Press NUMBERED.keys 100, then 2, then 5.

D•
O8
Function & Channel Display
Whena functionbuttonis
pressed,e.g. PLAY,or
youchangechannels,
a 4 seconddisplay
appearsfirst in large
andthensmallcharacters.
Warning and Instruction Displays
Thesedisplayswillalertyou ofa missedoperationor
providefurtherinstructions.
INO CH FOUND
I PLEASE CHECK ANTENNA
If no active channels are found I _CO_-CT_O,THEN
for CHANNEL MEMORY...
(See page 12.) _iPus.vc_c, uPKeYAC.A_
Menu Screen
1Press ACTION to
display the menu.
2Press AV and Ib"to
make your selection.
......... MENU .........
ISET UP CHANNEL
I D IO_AI LANGUE: ENGL I SH
I SELECT:" •KEY
I SET :=, KEY
_, END :ACTION KEY
• To get the most from each feature,
please read the Operating Manual
before attempting any operation.
VCR Status & Clock Display
Press DISPLAY to display or remove the
overlay shown below.
Function
Status
CurrentTime
0:25 CH
-0:12:34, SP
Channel
If you attempt to set or review
a Timer Recording and the
Clock is not set...
(See page 18.)
After a Timer Program has
been set...
(See page 18.)
If you press REC on the
remote control or VCR,
and a cassette is inserted
with no record tab...
(See page 17.)
If you press PLAY, FF, REW,
or REC on the remote
control or VCR without
a cassette inserted...
(See pages 16, 17.)
IfyoupressPOWERorSTOP
duringa TimerRecording...
(visibleinVCR modeonly)
(See page,19.)
IPLEASE SET CLOCK
BEFORE _INO
TURN VCR OFF
FOR TIMER RECORDING
CHECK CASSETTE
RECOROTAB
Rec Time Remaining
(OTRmodeonlyseepage17.) Tape Speed
(See pa_e5.)
Blank Tape/No Video Signal Indication
If head cleaning becomes
necessary while playing
back a tape...
(See page 5.)
If you press a functionbutton
other than STOP/EJECT or
POWER while the VCR is in
VCR Lock mode...
(See page 26.)
VIDEO HEADS I_AY
NEED CLEANING
Pt.EASE INSERT
CLEANING
OR REFER TO k_NUAL
END:PLAY KEY
IVCR LOCK ACTIVATED
Whenever a blank section of a tape comes up in
Play mode, or when the selected channel has no
broadcast signal with the Blue Back ON/OFF
Feature (page 26) set to ON, the TV screen will
turnsolid blue.
Ifyou press POWER, ACTION
or PROG on the remote while
in TV or CABLF_/DSS mode...
(See pages 24, 25.)
WICJ_BLEIDSS MODE
I_J_F. PUSHVCRI_Y
ON REMOTE
15

Playback a Tape
*Important: If the remote control POWER, ACTION, PROG, CH_IJV, INDEX or ADD/DLT button does
not work when pressed, press the VCR buttonon the remote and try the button again.
I_lPCheck list before you begin.
[] Allconnectionsare made.
(See pages6-9.)
[] TV and VCR are pluggedin.
[] TV isturnedonandsettothe VCR
channel(CH 3 or4).
3-4 1 2
Insed a casse_e.
•VCR power comes on automatically.
•=VCR" lightsin the Multi Function Display. I ]
2Press PLAY on the remote or VCR to start playback.
•Playbackbeginsautomaticallyifcassettehasnorecordtab.
3Press STOP on the remote or VCR to stop playback.
•Torewindthetape,pressREW.
AI Press STOP/EJECT on the VCR to eject the cassette.
•Youmayejecta cassettewithpower onor off.
TRACKING/ Multi FF/REW
V-LOCK Function Search
Display To Find a Particular Scene During Playback
Press REW or FF during playback to search for a scene.
•SearchspeedforSPmodetapesis7 times and SL_Pmodetapes is
21 times thenormalspeed.
•Somenoisebarswillappearduringsearch.
2
PLAY
PAUSE
FF/REW Special Effects During Playback
These features work best in SP or SLP mode. The sound will be muted.
Slow Motion Playback
Press SLOW to start slow motionplayback during playback.
Press PLAY or SLOW to release.
Still (Freeze) Frame Picture
PressPAUSEtofreezeandreleasethepicture.
•Toreducepicturenoise,firstpressSLOW.Then,useCH(TRACKING)
_* toclearupthepicture.Now,pressPAUSE.
Frame by Frame Advance
In Stillmode,holddownSLOW toadvancethestillpictureone
frame at a time.PressPAUSEto release.
•TRACKING/
V-LOCK
,Caution:
Pleaseinspectyourcassettetapes
and removeany looseorpeeling
labelstopreventthemfrom
becomingjammedin yourunit.
16
Features for a Quality Picture
Diaital Auto Picture
This feature automatically controls the video output signal for less
noise depending on the tape condition.
Diaital Auto Tracking
This feature continuously analyzes the signal°an_l adjusts for
optimum picturequality.
Manual Trackina Control (to reduce picture noise)
Use during Playback and Slow Motion mode to reduce picture
noise. Press CH (TRACKING) _during playback untilthe
pictureclears up. To return to Auto Tracking mode, press POWER
off and then on again.
V-Lock Control (to reduce picture litter)
In Stillmode, CH (TRACKING) _ operate as a "
V-Lock control. Press _untilthe picture is stabilized.

Record On
[_PCheck list before you begin.
[] All connections are made.
(See pages 6-9.)
[] VCR isplugged in.
[] "IV is turned on and set to the VCR
channel (CH 3 or 4).
1 4
Multi Function VCR/TV
CHANNEL Display
,Up/Down
INPUT
5
4
DISPLAY-
CHANNEL
Up/Down
a Tape
1Insert a cassette with record tab.
•VCR power comes on automatically. I
I
I
2Press CH A/V or NUMBERED
keys to select a channel.
•Or, press CHANNEL J_' on the VCR.
•Holding down CH _will increase
the channel search speed.
• To record from an outside source,
press CH _or INPUT to select
"LINE" (see page 23).
CH O8
3
4
Press SPEED to change the
recording speed.
•SP = Standard Play,
LP = Long Play
SLP = Super Long Play
(See page 5.)
sP
Press REC/TIME on the remote control or VCR to
start recordina.
•To edit out unwanted portions, press PAUSE to pause the
recording in progress.
To release, press PAUSE again.
(After the VCR has been in Pause mode for 5 minutes, it will
stop automatically to protectthe tape and video head.)
fOne Touch Timer Recording (OTR)
The VCR startsrecordingandtumsitselfoffat a presettime.
In step 4, press REC/TIME repeatedly to set the length of the
recording. Each press willchange the stop time as shown.
•=TIMERmlights in the Multi Function Display.
•The remaining recording time can be displayed by pressing
DISPLAY in OTR mode.
J
35 Press STOP to _tODrecording.
•Or, press STOP/EJECT on t.heVCR.
Record One Program While Watching
Another
1Press VCR/TV while recording is in progress totum
off the VCR indicator in the Multi Function Display.
2Use-fire TV channel controls to select a program.
The VCR will continue to record your program while
you watch any channel you choose.
•To_witchback andforthbetweenthe recordingand
viewingchannel,pressVCR/TV.
Selecting Channels at the VCR
1Tum your _and VCR on.
•VCR Indicator lights on the Multi Function Display.
If indicator doesn't light, press VCR/TV to tum it on.
2Use CH _on the-remote control or VCR to
select channels.
•ToswitchbacktoTV channelselection,press
VCR/TV to turnVCR indicatoroff,orsimplyturn
theVCR poweroff. 17

Timer Recordin
Important:- If the remote control POWER, ACTION, PROG, CH_, INDEX or ADD/DLT button does
not work when pressed, press the VCR button on the remote and try the button again.
Youcan setupthe VCR torecorda one
time,daily,orweeklyprogramwhileyouare
awayorotherwiseoccupied.Upto 8
programscanbe storedinmemory.
[_PCheck list before you begin.
[] Allconnectionsare made.
(See pages6~9.)
[] TV and VCR are pluggedin andtumedon.
[] VCR/TV selectorisset to "VCR."
[] Clockissetto correcttime.
[] Recordtab inplace.(See page5.)
Multi Function Display
18
!
.4
5
1Press PROG* to display the
program screen.
• Ifa programisalreadyinmemory,press&.V
and•toselectanunusedprogramnumber.
2Press AV and I_ to select and
set one of the following as the DATE:
•1-31 =One time recording
•DAILY =Same time MON~FRI
___._.l/ START STOP CH]
I SELSC1":*v _EY I
ISm" :>KEY I.
!_o :,,,_,G_v i
•WEEKLY(SUN-SAT) =Sametimeoncea week
(,e8--9 ........ 31ml m2 ...... 6"_
Today'sDate -- 7 SELECTA I• SelectionOrder DAILY
LWEEKLY WEEKLY WEEKLYJ
(SAT) ...... (MON) m(SUN)
3Press AV and •I_
to select and set each
ofthe remaining
items at right.
Remaining Itemsto be set:
•STARTtime
• STOPtime
•CH(annel)number,orLINE
foroutsidesourcerecording
•Speed(SP, LP,SLP)
To Make Corrections
Repeatedly press •to move the cursor to the right, or •to
move to the left to the incorrect entry and make the correction.
4Press PROG to end the program.
•Thisscreenappearsforconfirmation.
P DT START STOP CH SPOI
I
.... :.... :__ _
ISELECT 1-8:&. • KEY |
I ENTER :, KEY I
t E.o :_ KEY j
To Enter More Programs
Press AV and • to select and set a blank
program number, and then repeat steps 2 and 3.
5 Press PROG to exitthis mode.
r-
10t Press POWER off to set the timer.
• When recordina Droorams via a cable box.
make sure the cable-box is left ON and
tuned to the desired channel. I-'r=='- It|",,.
MultiFunctionDisplay

POWER
STOP
STOP
Multi Function Display
SELECT/SET
IAv.,<W)
keys
Cancel a Timer Recording:
(Recording is in progress)
PressPOWERandthenSTOPwithin10 secondsto
cancelthetimerrecording.
•TheTIMERindicatorgoesoutintheMultiFunctionDisplay.
Replace Program Contents:
(Recording isnot in progress)
1Press PROG to display all currently
set programs.
2Press &Y and • to select and
set a program number.
(See page 18.)
3 Press &V and < • to select
and set replacement timer
information.
4Press PROG twice to exit this mode.
2 * to_ooP12_ooP12S ,SPI
3 10 8:00P 9:00P 10 SP I
4 SU g:0OPIO:00P L LP I
I
SELECT t-e:& •KEY I
ENTER :=. KEY l
ENO :PROG KEY J
....
PROG
ADD/
DELETE _
Review or Clear Program Contents:
(Recording is not in progress)
1 Press PROG to displayall currently J_l
set programs, j, su ,;o=.lo:oop• "PI
2Press AV to select a program t c,_._,:AOO,_T_-W I
I SELECT 1-8:A •KEY J
number. I ENTER:_,KEY I
( END :PRCX3 KEY J
3Press ADD/DLT ifyou want
to clear the program.
4Press PROG to exit this mode.
PDT START STOP CH SPY)]
3 10 8:00P 9:0(0 10 sP
4 SU 9:00PIO:OOP L LP
SELECT l-B:& • KJEY
ENTER :1_,KEY
END :PROG KEY
<ls CTZ_
Timer Recording Using VCR Buttons
(Make sure a cassette tape isnot inserted in the VCR.) ,
1HolddownSTOP/EJECTandpressREWtoentertheProgrammode.
2 PressFForREC/TIMErepeatedlyorholddowntomakeselections.
3Press PLAY to set the item and move on.
• To makecorrections,repeatedlypressPLAYtomovethecursortothe right,
or REWtomovetothelefttotheincorrectentryandmakethecorrection.
4Press STOP/EJECT and REW togetherto display program contents
after all itemshave been entered.
•YoucannotclearprogramswiththeVCRbuttons.
5 Hold downSTOP/EJECT and press REW, (release REW first, and
then release STOP/EJECT) toexit thismode.
6 Insertacassette withrecordtab and press POWER off toset the timer.
19

I_t _,,-.- I|
*Important: ifthe remotecontrolPOWER, ACTION, PROG,CH_I_F, INDEXorADD/DLTbutton does not
workwhen pressed,presstheVCR buttonontheremoteandtrythebuttonagain.
VHS Index Search System
Eachtimeyoustarta recording,an invisibleindexmarkisautomaticallyplacedonthe
tape.Youcanthenusetheseindexmarkstoaccessorscanyourrecordings.
REWIND FAST FORWARD
3 3
Direct Access
Thisfeatureallowsyoutogodirectlyto therecordingyouwantfrom
anywhereonthetape byenteringtheappropriateindexnumber.
1 Press INDEX* in Playback or
Stop mode.
2Press a NUMBERED key to
select the desired recording.
•To calculatethenumber,see below.
INOEX
INDEX
3Press REW or FF to start a
reverse or forward search.
•Whenthe designatedlocationisreached,
the VCR goesintoPlaybackmode.
INDEX SEARCH 04
3
FAST
FORWARD
3
To calculate an Index Number
Count forward or backward each recording start point, including
the recording you want to see, from wherever you are on the tape.
Example 1:
If you are watching recording4 and you want to watch recording 2,
count the start points to number 2. The total is3. Enter 3 in step
=2"and press REW.
tl mk, lot
Example 2:
If you are watching recording 2 and you want to watch recording 6,
count the start points to number 6. The total is4. Enter 4 in step
=2"and press FF.
•÷ F
NOTE: €indicates start points of each recording.
2O