Panasonic AG-CX10 User manual

Operating Instructions
Memory Card Camera-Recorder
Model No.
AG-CX7
AG-CX8
AG-CX10
Please read these instructions carefully before using this product, and save this manual for future use.
W0220SQ1100 -FJ
P
DVQP2236YA
ENGLISH

Safety Precautions
- 2 -
Safety Precautions
Dear Customer,
Thank you for choosing Panasonic!
You have purchased one of the most sophisticated and reliable products on the
market today. Used properly, we’re sure it will bring you and your family years of
enjoyment. Please take time to fill in the information on the right.
The serial number is on the tag located on the back of your camera. Be sure to
retain this manual as your convenient camera information source.
WARNING:
To reduce the risk of fire, electric shock or product damage,
≥Do not expose this unit to rain, moisture, dripping or splashing.
≥Do not place objects filled with liquids, such as vases, on this unit.
≥Use the recommended accessories.
≥Do not remove covers.
≥Do not repair this unit by yourself. Refer servicing to qualified service personnel.
CAUTION!
To reduce the risk of fire, electric shock or product damage,
≥Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated.
≥Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items.
≥Do not place sources of naked flames, such as lighted candles, on this unit.
Certification and Compliance
See Camera for the certification and compliance mark specific to that device.
1 Press the <MENU> button.
2 Select the [OTHERS] menu.
3 Select the [APPROVED REGULATION] menu.
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.
U.S.A./CANADA CONSUMERS: ATTENTION:
A lithium ion battery that is recyclable powers the product
you have purchased. Please call 1-800-8-BATTERY for
information on how to recycle this battery.

Safety Precautions
- 3 -
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
THE FOLLOWING APPLIES ONLY IN CANADA.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
THE FOLLOWING APPLIES ONLY IN CANADA.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
≥Reorient or relocate the receiving antenna.
≥Increase the separation between the equipment and receiver.
≥Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
≥Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
≥Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.
≥To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when
connecting to computer or peripheral devices.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Supplier’s Declaration of Conformity
Trade Name: Panasonic
Model No.: AG-CX10
Responsible Party: Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102-5490
Support Contact: 1-800-524-1448
CAN ICES-3(B)/NMB-3(B)
Contains FCC ID: VPYLB1JS955
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC
radio frequency (RF) Exposure Guidelines as this equipment has very low levels of RF energy.
Compliance with FCC requirement 15.407(c)
Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog
baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital
baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will
be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue
transmission in case of either absence of information to transmit or operational failure.
Frequency Tolerance: ± 20ppm
Contains IC: 772C-LB1JS955
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
The available scientific evidence does not show that any health problems are associated with using low power wireless
devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices
emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can
produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known
adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have
suggested that some biological effects might occur, but such findings have not been confirmed by additional research.
AG-CX10 (HMN is 1JS2099) has been tested and found to comply with ISED radiation exposure limits set forth for an
uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules.

Safety Precautions
- 4 -
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable
safety instructions listed below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12)Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13)Unplug this apparatus during lightning storms or when
unused for long periods of time.
14)Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.

Safety Precautions
- 5 -
∫Concerning the AC adaptor
∫Concerning the battery
∫Product Identification Marking
AC adaptor
This AC adaptor operates on AC between 100 V and 240 V.
But
≥In the U.S.A. and Canada, the AC adaptor must be connected to a 120 V AC power supply only.
≥When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor to suit the AC outlet configuration.
≥When connecting to a supply of greater than AC 125V, ensure the cord you use is suited to the voltage of the AC supply
and the rated current of the AC adaptor.
≥Contact an electrical parts distributor for assistance in selecting a suitable AC plug adaptor or AC cord set.
The power plug is the disconnecting device. Install this unit so that the power plug can be unplugged from the socket outlet
immediately.
This unit is intended for use in moderate climates.
Battery pack (Lithium ion battery pack)
≥Use the specified unit to recharge the battery pack.
≥Do not use the battery pack with equipment other than the specified unit.
≥Do not get dirt, sand, liquids, or other foreign matter on the terminals.
≥Do not touch the plug terminals (i and j) with metal objects.
≥Do not disassemble, remodel, heat or throw into fire.
If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water.
If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly with water, and then
consult a doctor.
Warning
Risk of fire, explosion and burns. Do not disassemble, heat above 60 oC (140 oF) or incinerate.
CAUTION
≥Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer.
≥When disposing of the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.
Product Location
Memory Card Camera-Recorder Bottom
AC adaptor Bottom

Safety Precautions
- 6 -
∫Cautions for use
Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.).
≥If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation.
≥Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound.
≥Recorded data may be damaged, or pictures may be distorted, by strong magnetic fields created by speakers or large motors.
≥Electromagnetic wave radiation generated by microprocessors may adversely affect this unit, disturbing the pictures and/or sound.
≥If this unit is adversely affected by electromagnetic equipment and stops functioning properly, turn this unit off and remove the battery or
disconnect AC adaptor. Then reinsert the battery or reconnect AC adaptor and turn this unit on.
Do not use this unit near radio transmitters or high-voltage lines.
If you record near radio transmitters or high-voltage lines, the recorded pictures and/or sound may be adversely affected.
Do not lift up this unit by the handle with the tripod still attached
≥When the tripod is attached, its weight will also affect the unit’s handle, possibly causing the handle to break and hurting the user.
≥To carry the unit while the tripod is attached, take hold of the tripod.
Do not swing the unit around, shake it by, or allow it hang from the handle
≥Do not jar, swing, or shake the unit by its handle. Any strong jolt to the handle may damage the unit or result in personal injury.
Do not allow the cord to drag on the ground or pull a connected cord along the passage
≥The cord will be damaged, causing fire or electrical shock, when the cord gets caught by the feet, excite will also cause personal injury.
When this unit is turned on, do not use it in direct contact with the skin for a long period of time.
≥When using this unit for a long period of time, use a support such as a tripod. Low temperature burns may result if any high temperature part
of this unit or hot air from the ventilation openings on the front side of the hand strap of this unit is in direct contact with the skin for a long
period of time.
About connecting to a PC
≥A USB2.0 cable is not supplied with this unit. Use a commercially-available generic USB cable conforming to USB2.0.
If possible, we recommend using a cable with a length of 1.5 m (approx. 4.9 feet) or less.
About connecting to a TV
≥Use a commercially-available High Speed HDMI cable. If possible, we recommend using a cable with a length of 3 m (approx. 9.8 feet) or
less.
About using a headphone
≥Excessive sound pressure from earphones and headphones can cause hearing loss.
≥Listening at full volume for long periods may damage the user’s ears.
∫Caution regarding the lens and the viewfinder
Do not aim the lens or the viewfinder at the sun or strong light. Doing so may cause the unit to malfunction.
∫Batteries that may be used with this product (As of January 2020)
Panasonic AG-VBR59/VW-VBD58 batteries may be used with this product.
∫The symbols on this product (including the accessories) represent the following:
It has been found that counterfeit battery packs which look very similar to the genuine product are made available to purchase
in some markets. Some of these battery packs are not adequately protected with internal protection to meet the requirements
of appropriate safety standards. There is a possibility that these battery packs may lead to fire or explosion. Please be advised
that we are not liable for any accident or failure occurring as a result of use of a counterfeit battery pack. To ensure that safe
products are used we would recommend that a genuine Panasonic battery pack is used.
AC
DC
ON
Standby
Class II equipment (The construction of the product is double-insulated.)
Í

- 7 -
Trademark
≥SDXC logo is a trademark of SD-3C, LLC.
≥“AVCHD”, “AVCHD Progressive” and the “AVCHD Progressive” logo are trademarks of Panasonic Corporation and Sony Corporation.
≥Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.
≥The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc. in the United States and other countries.
≥LEICA is a registered trademark of Leica Microsystems IR GmbH and DICOMAR is a registered trademark of Leica Camera AG.
≥Windows
®
is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
≥Screenshots are used according to Microsoft Corporation guidelines.
≥Intel
®
and Intel
®
Core
™
are trademarks of Intel Corporation in the U.S. and/or other countries.
≥Mac and macOS are trademarks of Apple Inc. registered in the U.S. and other countries.
≥iPhone and iPad are trademarks of Apple Inc. registered in the U.S. and other countries.
≥App Store is a service mark of Apple Inc.
≥Google, Android and Google Play are trademarks of Google LLC.
≥The Wi-Fi CERTIFIED
™
Logo is a certification mark of Wi-Fi Alliance
®
.
≥The Wi-Fi Protected Setup
™
Logo is a certification mark of Wi-Fi Alliance
®
.
≥“Wi-Fi
®
” is a registered trademark of Wi-Fi Alliance
®
.
≥“Wi-Fi Protected Setup
™
”, “WPA
™
”, and “WPA2
™
” are trademarks of Wi-Fi Alliance
®
.
≥NDI
®
is a registered trademark of NewTek, Inc.
≥All other names, company names, product names, etc., contained in this instruction manual are trademarks or registered trademarks of their respective
owners.
License
This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive
remuneration to (i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer
engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any
other use. Additional information may be obtained from MPEG LA, L.L.C.
See http://www.mpegla.com
≥Separate license contract with MPEG-LA is required to record in a memory card with this product and to distribute that card to end users for a profit.
The end user mentioned here indicates a person or organization that handles contents for a personal use.
Software information about this product
This product incorporates the following software:
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation,
(3) the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0),
(4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.1), and/or
(5) open source software other than the software licensed under the GPL V2.0 and/or LGPL V2.1.
The software categorized as (3) - (5) are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty
of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
For details, refer to the terms of license that are displayed using the following method:
1) Select the [NETWORK] menu → [DEVICE SEL] → [WLAN] or [OFF].
2) Select the [OTHERS] menu → [USB DEVICE] → [SERVICE MODE] → [YES].
Select “LICENSE.TXT” in the external drive recognized by the computer.
At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact information provided below, for
a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code
covered under GPL V2.0 or LGPL V2.1, as well as the respective copyright notice thereof.
Contact Information: [e-mail]
The source code and the copyright notice are also available for free in our website below.
https://panasonic.net/cns/oss/index.html
How to read this document
∫Models described in these operating instructions
≥This document describes the operation of models AG-CX7, AG-CX8, and AG-CX10.
≥The illustrations of the products, menu screens, etc., may differ from the actual items. Unless specifically stated otherwise, screen depictions and
illustrations of the unit are of AG-CX10.
≥The functionalities of the models differ. Be aware that the part numbers for the models that support the functions are shown.
≥Not all models may be available depending on the region of purchase.
≥Model numbers are abbreviated as follows in these operating instructions:
Model number Abbreviation used in these operating instructions
AG-CX7 [CX7]
AG-CX8 [CX8]
AG-CX10 [CX10]
CX7
CX8
CX10

- 8 -
∫Conventions used in this manual
≥Words and phrases in [ ] brackets indicate content displayed in the LCD monitor.
≥Words and phrases in < > brackets indicate design text used on this unit, such as button names.
∫Reference pages
≥Reference pages in this document are indicated by (l 00).
∫Terminology
≥The battery pack is described as “battery”.
≥SDHC memory card, and SDXC memory card are referred to as “SD card” unless distinguished otherwise.
≥A memory card with the “microP2” logo is referred to as a “microP2 card”.
≥SD card and microP2 card are referred to as a “memory card” unless distinguished otherwise.
≥Images created with one recording operation are referred to as a “clip”.

Contents
- 9 -
Contents
Safety Precautions...........................................................................2
Chapter 1 Overview 11
Before using the unit .....................................................................12
Accessories/Optional accessories...............................................15
Accessories...................................................................................... 15
Optional accessories........................................................................ 15
When turning on the power for the first time ..............................16
[TIME ZONE] ................................................................................... 16
[CLOCK SETTING] .......................................................................... 16
What you can do with this unit .....................................................17
Recording to the memory card......................................................... 17
Linking to external devices............................................................... 17
Connecting to the network ............................................................... 18
Chapter 2 Description of Parts 19
Main unit .........................................................................................20
Handle unit (supplied) ...................................................................23
Basic operation ..............................................................................25
Multidial operation............................................................................ 25
Touch operation of the LCD monitor................................................ 25
Chapter 3 Preparation 26
Power supply..................................................................................27
Attaching and removing the battery ................................................. 27
Charging the battery ........................................................................ 28
Attaching accessories ...................................................................30
Adjusting the grip belt ...................................................................... 30
Attaching the lens hood ................................................................... 30
Attaching the eye cup ...................................................................... 31
Attaching the handle unit ................................................................. 32
Attaching the external microphone .................................................. 34
Attaching a tripod ............................................................................. 35
Turning on/off the power...............................................................36
Turning the unit on and off with the power button............................ 36
Turning the unit on and off with the LCD monitor/viewfinder ........... 36
Charging the built-in battery .........................................................36
Setting the date/time of the internal clock...................................37
Preparing the memory card ..........................................................38
Memory cards supported by the unit (As of January 2020) ............. 38
Preventing unintentional erasing...................................................... 39
Inserting/removing the memory card ............................................... 40
Formatting the memory card............................................................ 40
Recording time of the memory card................................................. 41
Handling the recording data............................................................. 43
Setting of time data........................................................................46
Definition of time data ...................................................................... 46
User bits settings ............................................................................. 46
Setting the time code ....................................................................... 47
Assigning function to the USER buttons.....................................49
Functions assigned to USER buttons .............................................. 49
Checking the function assigned to the USER buttons ..................... 51
Adjusting and setting the LCD monitor .......................................52
Using the LCD monitor..................................................................... 52
Adjusting the LCD monitor............................................................... 52
Mirror shooting................................................................................. 52
Adjusting and setting the viewfinder ...........................................53
Using the viewfinder......................................................................... 53
Adjusting the viewfinder ................................................................... 53
Tally lamp........................................................................................54
Chapter 4 Operation 55
Basic operation of the screen.......................................................56
Major button operation and screen display ...................................... 56
Major button operation and switching screen .................................. 57
Operating each screen ..................................................................58
Camera image screen...................................................................... 58
Thumbnail screen ............................................................................ 58
Operation icon screen...................................................................... 58
Basic operation of the menu.........................................................59
Configuration of the menu................................................................ 59
Displaying the menu ........................................................................ 60
Operating the menu ......................................................................... 61
Initializing the menu ......................................................................... 62
Menu settings.................................................................................63
[THUMBNAIL] menu .........................................................................63
[CAMERA] menu ..............................................................................64
[SCENE FILE] menu.........................................................................67
[AUDIO] menu ..................................................................................72
[VIDEO OUT/LCD/VF] menu ............................................................74
[RECORDING] menu........................................................................82
[NETWORK] menu ...........................................................................85
[SYSTEM] menu ...............................................................................91
[OTHERS] menu...............................................................................92
Factory setting value of the scene file.........................................96
[SCENE FILE] menu.........................................................................96
Target items for scene file/setup file/initialization...................... 97
[THUMBNAIL] menu .........................................................................97
[CAMERA] menu ..............................................................................97
[SCENE FILE] menu.........................................................................98
[AUDIO] menu ..................................................................................99
[VIDEO OUT/LCD/VF] menu ............................................................99
[RECORDING] menu......................................................................101
[NETWORK] menu .........................................................................101
[SYSTEM] menu .............................................................................102
[OTHERS] menu.............................................................................102
Handling setting data ..................................................................103
Scene files ......................................................................................103
Setup file.........................................................................................105
Chapter 5 Shooting 106
Shooting .......................................................................................107
Selecting the resolution, codec, and frame rate for
recording video ...........................................................................108
Adjustable settings when shooting ...........................................112
Iris ...................................................................................................112
Gain ................................................................................................113
Super gain ......................................................................................113
AE level (exposure compensation).................................................114
Brightness adjustment ....................................................................115
Focusing (manual focus) ................................................................115
Setting the shutter speed................................................................116
Area mode function.........................................................................116
Adjusting the white and black balance...................................... 118
White balance adjustment ..............................................................118
Black balance adjustment...............................................................121
Using the zoom function.............................................................122
Adjusting the zoom position............................................................122
Using the built-in LED light.........................................................124
Adjust the amount of light from the built-in LED light......................124
Image quality adjustment............................................................125
Detail function .................................................................................125
Skin tone function ...........................................................................125
RB gain control function..................................................................125
Chroma setting function..................................................................125
Matrix function ................................................................................125
Color correction function.................................................................126
Black control function......................................................................126
Gamma function .............................................................................126
Knee function..................................................................................126
White clip function...........................................................................126
Flash band compensation (FBC) function ................................ 127
Flash band compensation function settings....................................127
When using the flash band compensation function ........................127
Super slow recording function...................................................128
Audio input...................................................................................129
Switching the audio input................................................................129
Using the built-in microphone/external microphone
(stereo mini jack) ........................................................................130
Using audio equipment/external microphone (XLR, 3-pin).............130
Adjusting the audio recording level.................................................131
Monitoring the audio .......................................................................132
Confirming audio input setting ........................................................132
Special recording function ......................................................... 133
Pre-recording..................................................................................133
Relay recording...............................................................................133
Simultaneous recording ..................................................................134
Background recording.....................................................................135
Interval recording ............................................................................136
IR recording ....................................................................................137

Contents
- 10 -
Convenient shooting functions ..................................................138
Zebra patterns display ................................................................... 138
Displaying the marker .................................................................... 138
Focus assist function ..................................................................... 139
Face detection/tracking AE&AF function ....................................... 142
Optical image stabilizer function .................................................... 142
Dynamic range stretcher function .................................................. 143
Time stamp function....................................................................... 144
Waveform monitor function ............................................................ 144
Digital zoom function...................................................................... 145
Level gauge ................................................................................... 145
Operation icon screen display....................................................146
Displaying the operation icon screen ............................................. 146
Multi manual function..................................................................147
Displaying the operation icon screen ............................................. 148
Adjusting headphone volume......................................................... 148
Chapter 6 Playback 149
Thumbnail operation....................................................................150
Thumbnail operation overview....................................................... 150
Thumbnail screen .......................................................................... 150
Copying clip ................................................................................... 153
Deleting clips.................................................................................. 154
Protecting clips............................................................................... 154
Restoring clips ............................................................................... 155
Linking the incomplete clips [CX10] ............................................... 156
Playing back clips .......................................................................... 157
Useful playback function.............................................................159
Resume play .................................................................................. 159
Still image recording function ....................................................160
Chapter 7 Output and Screen Display 161
Output format ...............................................................................162
Format that can be output from the <SDI OUT> terminal
[CX8]/[CX10].............................................................................. 162
Format that can be output from the <HDMI> terminal ................... 163
Screen status display ..................................................................164
Screen display during shooting...................................................... 164
Screen display during playback ..................................................... 168
Checking and displaying shooting status....................................... 169
Mode check display ....................................................................... 170
Chapter 8 Connecting to External Devices 172
Connecting with headphones and TV/monitor..........................173
Headphones................................................................................... 173
Remote control............................................................................... 173
TV/monitor ..................................................................................... 174
Connection function via the USB terminal ................................175
Connection with a computer in card reader mode ......................... 175
Operating environment (mass storage) ......................................... 176
Remote operation by iPhone/iPad or Android terminal ...........177
Chapter 9 Network Connection 178
Network connection.....................................................................179
Available functions ......................................................................... 179
About the wireless LAN function on this unit.................................. 179
Preparing for connection (wired LAN) [CX10]................................ 180
Network settings ..........................................................................181
Wireless LAN settings.................................................................... 181
Wired LAN settings [CX10] ............................................................ 183
Specifying the network settings using the settings tool [CX10]...... 184
Confirming the network status ....................................................... 185
Connecting to the iPhone/iPad or Android terminal.................186
Unit settings ................................................................................... 186
Preparing the HC ROP app ........................................................... 187
Connecting to the HC ROP app..................................................... 187
Operation while the HC ROP app is connected............................. 187
Streaming function ......................................................................188
Unit settings ................................................................................... 188
Starting streaming with an operation from the application
software ..................................................................................... 189
Starting streaming with an operation on the unit............................ 190
Entering the setting using the setting tool ...................................... 191
NDI|HX function [CX10] ...............................................................192
Unit settings ................................................................................... 192
Chapter 10 Notes 194
Frequently asked questions ....................................................... 195
Power supply ..................................................................................195
Battery ............................................................................................195
Memory card...................................................................................195
Indication ........................................................................................195
Shooting..........................................................................................196
Playback .........................................................................................196
Connections with external devices .................................................196
Computers ......................................................................................197
Others .............................................................................................197
Warning system ........................................................................... 198
Cases indicated by error messages ...............................................198
Recording function that cannot be used simultaneously........202
Updating the unit’s firmware ...................................................... 203
Cleaning and storing...................................................................204
Cleaning the main unit ....................................................................204
Cautions for storage .......................................................................204
Chapter 11 Specification 205
Dimensions .................................................................................. 206
Specifications ..............................................................................207
General ...........................................................................................207
Camera ...........................................................................................207
Memory card recorder ....................................................................208
Digital video ....................................................................................209
Digital audio ....................................................................................209
Streaming .......................................................................................210
Wi-Fi ...............................................................................................210
Video output....................................................................................210
Audio input......................................................................................210
Audio output....................................................................................210
Other input/output...........................................................................210
Monitor............................................................................................211
Handle unit......................................................................................211
USB ethernet adaptor ([CX10] supplied) ........................................211
AC adaptor......................................................................................211
Battery pack (AG-VBR59)...............................................................211
Index .............................................................................................212

Chapter 1 Overview
Before using the unit, read this chapter.

Chapter 1 Overview — Before using the unit
- 12 -
Before using the unit
∫Before using the unit, always check if the built-in battery is not consumed, and then set the date/time.
The date of the internal clock of the unit resets to January 1, 2020 if the built-in battery is exhausted. This may result in the meta data of the clip not being
recorded correctly, and it may not display correctly in the thumbnail screen.
Connect the AC adaptor to the main unit or attach a battery when recharging the built-in battery.
The date/time set on the main unit is maintained for approximately 6 months when left in this state for approximately 24 hours.
(Recharged even when the power is on.)
For details about setting the time zone and date/time, refer to [TIME ZONE] (l 16) and [CLOCK SETTING] (l 16).
∫Do not use the unit in oily-smoky or dusty places.
Performance may be adversely affected if small particles or other foreign objects get inside the product.
Take extra care in environments where a special effect such as theatrical smoke is used.
∫When using this product during rain or snow or when at the beach, be careful that water does not get inside the camera.
Water causes damage to the camera and memory card. (Repair may be impossible)
∫Take care so sand and/or dust do not get inside the camera when using it at the beach, etc.
Sand and dust may damage the camera and memory card. (Be careful when inserting or removing the memory card)
∫AC adaptor and battery
≥It may take more time to charge or may not be able to charge when the temperature of the battery is extremely high or extremely low.
≥Noise may be generated in radio when the unit is used close to a radio (especially when receiving AM). Keep a distance of 1 m (approx. 3.3 feet) or
more when using.
≥Oscillating sound may generate inside the AC adaptor during the use, but this is not a malfunction.
≥Always disconnect the power plug from the power outlet after the use. (Power of approximately 0.1 W is consumed by the AC power itself if kept
connected)
≥Do not get the terminal section of the AC adaptor, or the battery dirty. Install the device close to the power outlet so the disconnection device (power
plug) can be easily reached.
∫Charging lamp during charging
When the charging lamp is flashing, the following should be considered.
Flashing with approx. 4 second period (on for approx. 2 seconds, off for approx. 2 seconds):
≥When the battery is over discharged or the temperature of the battery is too high or low.
It can be charged, but it may take a few hours to complete the charging normally.
≥Once normal charging starts, the charging lamp lights up green. However, depending on the conditions of use, even when normal charging is taking
place, the charging lamp may keep flashing in approx. 4 second intervals until charging is completed.
Flashing with approx. 0.5 second period (on for approx. 0.25 second, off for approx. 0.25 second):
≥The battery is not charged. Remove the battery from the unit, and try charging again.
≥Check that the terminals of the unit or battery are not dirty or covered with a foreign object, and connect the battery correctly once again.
If a foreign object or dirt is present, turn off the unit before removing.
≥The battery or environment is at an extremely high or low temperature. Wait until the temperature has returned to an appropriate level and try charging
again. If you are still unable to charge, there may be a fault in the main unit, battery or AC adaptor.
Off:
≥Charging has finished.
≥If the status indicator stays off despite the charging being unfinished, there may be a fault in the unit, battery or AC adaptor.
≥If the operating time is very short even after the battery has been recharged, the battery has worn out. Please purchase a new battery.
∫Memory cards
≥The surface of this unit or the memory card may get slightly hot when used for a long period of time, but this is not a malfunction.
≥The amount of memory included on the label of the memory card is the total amount of memory below.
jCapacity to protect and manage copyright
jCapacity usable as the normal memory on the unit or a PC.
≥Do not give a strong impact to, bend, or drop the memory card.
≥Memory card data may become destroyed or erased in the following cases.
jElectrical noise or static electricity
jMalfunction of the unit or the memory card
≥Do not perform the following operations when accessing the memory card (the card 1 access lamp/card 2 access lamp is flashing in orange).
jRemoving the memory card
jDisconnecting battery or the AC adaptor without turning off the main unit
jApply vibration of impact
∫Take care not to drop the main unit when carrying the camera.
≥Strong impact will damage the main unit, and it may not operate properly.
≥Hold the handle
*
or grip when carrying the camera, and handle it carefully.
* The handle can be used when the handle unit (supplied) is attached.

Chapter 1 Overview — Before using the unit
- 13 -
∫Do not apply insecticide or volatile material to the camera.
≥The main unit may deform or the paint may peel off when insecticide or volatile material is applied.
∫Do not allow the camera to remain in contact with a rubber or vinyl object for a long period of time.
∫Disconnect the battery or disconnect the AC cable from the power outlet after the use.
∫Battery characteristics
The battery is a rechargeable lithium-ion battery. It produces electrical energy via an internal chemical reaction. This chemical reaction is effected by the
ambient temperature and humidity. The usable time of the battery becomes shorter when the temperature gets higher or lower. When used in an
environment with extremely low temperature, it can only be used for approximately 5 minutes.
When the battery is in an extremely hot environment, its protective function will operate and the unit cannot be used temporarily.
∫After using the unit, be sure to remove the battery.
Securely remove the battery from the camera.
(Minute current is consumed even if the camera is turned off when the battery is left attached)
The battery will become over discharge and may become unusable even if it is recharged when the battery is left attached for long period of time.
Do not remove the battery when the power is turned on.
Turn off the power and remove the battery after the operation lamp goes completely out.
∫Take proper care of the battery terminal.
Do not allow dust or foreign objects on the battery terminal.
Confirm that the battery and its terminal section is not deformed when the battery is dropped by mistake.
Do not mount a deformed battery to the camera. This may damage the camera.
∫Cautions when throwing memory cards away or transferring them to others
Formatting memory cards or deleting data using the functions of the unit or a computer will merely change the file management information: it will not
completely erase the data on the cards.
It is recommended to completely erase the data in following method when discarding/conveying.
≥Physically destroy the memory card itself
≥Completely erase the data in the memory card using a commercially available data erasing software for PC, etc.
Users are responsible for managing the data stored in their memory card.
∫LCD monitor and viewfinder
≥Condensation sometimes forms on the LCD panel of the LCD monitor in locations subject to extreme temperature differences. If this happens, wipe
with a soft, dry cloth.
≥Do not touch the LCD monitor with your finger nails, or rub or press with strong force.
≥The LCD monitor will be slightly darker than normal immediately after the power is turned on when the camera is very cold. It will return to its regular
brightness when the internal temperature increases.
≥The LCD monitor and viewfinder are managed with high precision so that at least 99.99% of the dots are effective pixels and 0.01% or less are invalid
pixels and always lit. This is not a malfunction and it has no effect whatsoever on the recorded images.
≥It may become difficult to see or difficult to recognize the touch when a LCD protection sheet is affixed.
∫About Condensation (When the lens, the viewfinder or LCD Monitor is fogged up)
Condensation occurs when there is a change in temperature or humidity, such as when the unit is taken from outside or a cold room to a warm room.
Please be careful, as it may cause the lens, the viewfinder or LCD monitor to become soiled, moldy, or damaged.
When taking the unit to a place which has a different temperature, if the unit is accustomed to the room temperature of the destination for about 1 hour,
condensation can be prevented. (When the difference in temperature is severe, place the unit in a plastic bag or the like, remove air from the bag, and
seal the bag.)
When condensation has occurred, remove the battery and/or the AC adaptor and leave the unit like that for about 1 hour. When the unit becomes
accustomed to the surrounding temperature, fogginess will disappear naturally.
∫Caution regarding laser beams
The MOS sensor may be damaged if the MOS sensor is subjected to light from a laser beam.
Take sufficient care to prevent laser beams from striking the lens when shooting in an environment where laser devices are used.
∫Regarding system frequencies
You can change the system frequency (59.94 Hz/50.00 Hz) for this unit by using the menu. ([FREQUENCY]: l 91)
≥When AVCHD clips are recorded, it is not possible to use the same memory card with different system frequencies. When the system frequency is
changed, use a different memory card.
∫Note the following points.
≥If you prepare to record important images, always shoot some advance test footage to verify that both pictures and sound are being recorded normally.
≥Panasonic will not assume liability when video or audio recording fails due to a malfunction of the unit or the memory card during the use.
≥Set the calendar (datetime of the internal clock) and the time zone, or check the setting before recording. This will have an effect on the management of
the recorded contents.

Chapter 1 Overview — Before using the unit
- 14 -
∫Exemption of liability
Panasonic is not liable in any way regarding following.
1 Incidental, special, or consequential damages caused directly or indirectly by the unit
2 Damages, breakage of the unit, etc., caused by misuse or carelessness of the customer
3 When disassembly, repair, or modification of the unit is performed by the customer
4 Inconveniences, damnification, or damages by not being able to record and/or display the video due to any reasons including failure or
malfunction of the unit
5 Inconveniences, damnification, or damages resulting from malfunction of the system combining with any third party equipment
6 A liability claim or any claim for a privacy violation by an individual or a group that was the subject of the video that the customer has shot
(including recording) that became public by any reason (including using with the network user authentication turned OFF)
7 The registered information is lost due to any reason (including initializing this unit because the authentication information such as user
name or password is forgotten)
∫Cautions regarding network
Since this unit is used connected to a network, following mischief may occur.
1 Leaking or divulging of information through the unit
2 Fraudulent operation of the unit by a malicious third party
3 Obstruction and/or stopping of the unit by a malicious third party
It is customer’s responsibility to take sufficient network security measures including the following to prevent damage caused by such mischief. Please
note that Panasonic is not liable in any way for damage caused by such mischief.
≥Use the unit on a network where safety is secured by using a firewall, etc.
≥When using the unit on a system where a PC is connected, make sure that checking and cleaning of infection by computer virus and malicious program
is performed periodically.
≥In order to prevent malicious attacks, use the authentication system and change the default setting values by using 8 characters or more including 3 or
more character types for the authentication information (such as user name and password) so that a third party cannot guess your authentication
information.
≥Store the authentication information (user name, password, etc.) appropriately so it is not visible to the third party.
≥Periodically change the authentication information (user name, password, etc.) and do not use the same authentication information as other accounts.
≥To prevent the setting information in the unit to leak to the network, execute measure such as restricting the access with user authentication, etc.
≥Do not install in a location where the unit, cable, etc., can be easily damaged.
∫Security
Take caution so the unit or memory card is not stolen, lost, or neglected. Note that Panasonic is not liable to leakage, falsification, or loss of information
caused by them.
∫When requesting repairs, or when transferring ownership/disposing of the product
≥After first taking note of personal information, make sure you delete information in this unit that includes personal information, including the wireless
LAN connection settings, etc., that you have registered or set in this unit, using the following menu settings:
j[NETWORK] menu → [UTILITY] → [NETWORK INITIALIZE]
j[OTHERS] menu → [MENU INITIALIZE]
≥Remove the Memory Card from this unit when requesting a repair.
≥Settings may return to factory default when this unit is repaired.
≥Please contact the dealer where you purchased this unit or Panasonic if above operations are not possible due to malfunction.
≥When requesting a repair for the handle unit, request a repair for the video camera as well, as the cause of the problem may be in the video camera.

Chapter 1 Overview — Accessories/Optional accessories
- 15 -
Accessories/Optional accessories
Accessories
Check the accessories before using this unit.
Battery pack (Parts No.: AG-VBR59) (l 27)
AC adaptor (l 28)
AC cable (l 28)
≥For AC adaptor
Lens hood (l 30)
≥Pre-attached to the main unit.
Eye cup (l 31)
Handle unit (l 32)
∫For the
The following accessories are also supplied.
USB HOST conversion cable (l 180) USB ethernet adaptor (l 180)
@
NOTE
≥Appropriately discard the AC cable cap (if attached) and packing materials after taking the product out.
Optional accessories
Some optional accessories may not be available in some countries.
Product numbers correct as of January 2020. These may be subject to change.
¥Battery charger (AG-BRD50)
¥Battery pack (AG-VBR59, VW-VBD58)
¥LED video light (VW-LED1PP)
¥Stereo microphone (VW-VMS10PP)
¥Unidirectional microphone (AG-MC200G)
Microphone holder (l 32)
Microphone holder mounting screws (l 32)
≥Length 12 mm (0.47q) (×2)
CX10

Chapter 1 Overview — When turning on the power for the first time
- 16 -
When turning on the power for the first time
The time zone, date, and time are not set when the unit is shipped.
[TIME ZONE] is displayed in the LCD monitor when the power is turned on for the first time.
Follow the guidance and make the settings in the order of [TIME ZONE] and then [CLOCK SETTING].
≥You can do these operations either with the multidial or by touching the LCD monitor.
[TIME ZONE]
Set the time difference from the Greenwich Mean Time.
A[TIME ZONE]
1 Set the time difference.
2 Select [SET].
Once the setting for [TIME ZONE] is completed, the [CLOCK SETTING] screen is displayed.
@
NOTE
0The setting for the date/time of the main unit changes together with the time zone settings.
0This can also be set with the [OTHERS] menu → [CLOCK] → [TIME ZONE].
[CLOCK SETTING]
Set the year, month, date, and time.
A[CLOCK SETTING]
B0 : 0 JAN. 1. 2020
1 Set the year, month, date, and time.
The year can be set between 2018 and 2037.
2 Select [SET].
Once the setting is complete, the camera image screen is displayed.
@
NOTE
0This can also be set with the [OTHERS] menu → [CLOCK] → [CLOCK SETTING].
ヌパホパパ

ホハハ



Chapter 1 Overview — What you can do with this unit
- 17 -
What you can do with this unit
Recording to the memory card
Recording in following types is possible.
≥(For the )
P2 recording (P2 MXF compatible)
≥MOV recording (UHD and FHD recording)
≥MP4 recording (UHD and FHD recording)
≥AVCHD recording
≥Simultaneous recording
≥Relay recording
≥Interval recording
≥Background recording
≥Pre-recording
Linking to external devices
Connecting to TV/monitor
Connect to a TV/monitor and output images.
≥When using / , use a BNC cable (<SDI OUT> terminal) to connect a TV/monitor.
≥Use a commercially-available High Speed HDMI cable. If possible, we recommend using a cable with a length of 3 m (approx. 9.8 feet) or less.
≥(For the /)
Use a commercially-available 5C-FB or equivalent double-shielded cable for the BNC cable.
Card reader mode
Data (files) for performing nonlinear editing on a computer are transferred.
≥The unit supports USB2.0.
*1 Memory cards are optionally available. They are not supplied with the unit.
*2 A USB2.0 cable is not supplied with the unit.
Use a commercially-available generic USB cable conforming to USB2.0. If possible, we recommend using a cable with a length of 1.5 m (approx. 4.9 feet) or
less.
The unit does not offer a bus-powered function.
AHDMI cable
B(For the /)
BNC cable (<SDI OUT> terminal)
CTV/Monitor
When using a DVI converter, etc., to connect an HDMI cable to this unit, make sure that you connect last to the <HDMI> terminal on this unit.
Connecting first to the <HDMI> terminal on this unit may cause a malfunction.
AMemory card
*1
BUSB2.0 cable
*2
CComputer
CX10
CX8
CX10



CX8
CX10
CX8
CX10




Chapter 1 Overview — What you can do with this unit
- 18 -
Connecting to the network
(For the / )
This unit is equipped with wireless LAN. It can connect to wireless LAN devices via a network.
(For the )
This unit is equipped with wireless LAN. It can connect to networks via wireless LAN or wired LAN.
To use a wired LAN, use the supplied USB HOST conversion cable and USB ethernet adaptor to connect a LAN cable.
Use the following cable for connections:
jLAN cable (STP
*
, category 5 or better, maximum 100 m (approx. 328 feet))
* STP (Shielded Twisted Pair)
≥Do not use any other USB HOST conversion cables except the supplied one.
≥Do not use any other USB ethernet adaptors except the supplied one.
Available functions
When the unit is connected to a network, the following functions are available.
∫Connecting to HC ROP app
You can remotely control this unit with the HC ROP app by connecting this unit with an iPhone/iPad or Android terminal via wireless LAN.
≥Checking camera status
≥Camera remote control (focus, zoom, image quality settings, recording control such as start/end recording, and time code/user bits settings)
≥Menu Operations
≥Starting and stopping streaming (when the function is assigned to the USER button)
The unit supports the multi camera function, with which a camera selected from up to 8 cameras is remotely controlled from a single device.
For details about operation of the HC ROP app, refer to the online help for the app.
∫Streaming function
You can perform streaming of audio and video currently shot with the unit over a network (wired LAN
*
/wireless LAN).
* Available for use when using .
∫(For the )
NDI|HX function
This unit can be connected to a network via a NewTek NDI|HX compatible switcher and a wired LAN.
CX7
CX8
CX10
CX10
CX10

Chapter 2 Description of Parts
This chapter describes the names, functions, and operations of parts on the unit.

Chapter 2 Description of Parts — Main unit
- 20 -
Main unit
The illustrations in this document show the handle unit (supplied) removed.
1 Lens hood (l 30)
2 Lens cover switching lever (l 31)
Opens/closes the lens cover.
3 Focus ring (l 115)
When the <FOCUS A/M/¶> button is pressed to set to manual focus
mode ([MF]) you can focus manually.
4 Rear ring (l 112, 114, 122)
You can manually perform zoom operations, adjust the iris (the lens
stop), and adjust the AE level (exposure compensation).
≥You can switch the function to be adjusted by setting with the menu,
pressing the USER button assigned to [REAR RING], or touching
the USER button icon.
5 <ND FILTER> switch (l 115)
Selects the ND filter to suit the illumination of the subject.
<1/64>: Reduces the amount of light entering the MOS sensor to 1/64.
<1/16>: Reduces the amount of light entering the MOS sensor to 1/16.
<1/4>: Reduces the amount of light entering the MOS sensor to 1/4.
<CLR>: Does not use the ND filter.
6 <FOCUS A/M/¶> button (l 115)
Select the focus function.
[AF] and [MF] switch each time you press the button. The focal point
goes to infinity after you press and hold the button, and then the
manual focus mode is engaged.
[AF]: Changes to the auto focus mode. The auto focus mode adjusts
the focus automatically.
[MF]: Changes to the manual focus mode. Control the focus ring
manually to adjust the focus.
7 Card slot 1 (l 40)
A slot for the memory card.
8 Card 1 access lamp (l 40)
Indicates the access status for recording and playback of the memory
card inserted in card slot 1.
9 Card slot 2 (l 40)
A slot for the memory card.
10 Card 2 access lamp (l 40)
Indicates the access status for recording and playback of the memory
card inserted in card slot 2.
11 Built-in speaker
Outputs audio during playback.
Audio is not output from the built-in speaker when headphones are
connected to the headphone terminal.
12 <SLOT SEL> button
Selects the card slot to record to or play back from.
13 <USER1> button (l 49, 145)
Used as a USER button (USER1).
≥[LEVEL GAUGE] is allocated at the time of purchase.
Switches display/hide of level gauge.
14 <USER2> button (l 49, 113)
Used as a USER button (USER2).
≥[BACKLIGHT] is allocated at the time of purchase.
Switches enable/disable of the auto iris control function for backlight
compensation.
15 <O.I.S.>/<USER3> button (l 49, 142)
Switches enable/disable of the optical image stabilizer function.
This is also used as the USER button (USER3).
16 <THUMBNAIL> button (l 150)
Press the button to switch between the camera image screen and the
thumbnail screen.
17 <DISP/MODE CHK> button (l 170)
Switches display/hide of information other than the time counter, time
stamp, zebra pattern, and marker.
Press and hold the button to display information about the settings of
the various shooting functions and information such as a list of the
functions assigned to the USER button. Each press of the button
switches the information page in order.
18 Diopter adjustment dial (l 53)
Adjusts the diopter scale so that the viewfinder screen can be viewed
clearly.
19 Eyepiece
Do not leave the eyepiece pointed toward the sun. Doing so might
damage the devices inside.
20 Eye cup (l 31)
21 Power button (l 36)
Press the button to switch the power on/off.
22 <WHITE BAL> button (l 118)
Selects the method for adjustment of the white balance.
Each time you press the button, the white balance switches in the
order “Preset”, [Ach], [Bch].
“Preset”: Adjusts the white balance to the preset value. Each time you
either press the USER button assigned to [AWB] or touch the USER
button icon, the setting changes in the order [P 3200K], [P 5600K],
“VAR” (screen display example: [V 3200K]).
[Ach]/[Bch]: Selects when using the stored value for the adjustment of
the white balance.
23 <AE LEVEL>/<USER4> button (l 49, 114)
Switches enable/disable of the AE level function.
Set the target value of the AE level in the [SCENE FILE] menu →
[AE LEVEL EFFECT].
This is also used as the USER button (USER4).
24 <AUTO/MANU> switch (l 107)
Selects the method to adjust the focus, gain, iris, white balance, and
shutter speed at shooting.
<AUTO>: Adjusts automatically. (Auto mode)
<MANU>: Adjusts manually. (Manual mode)
21 3 4 5 13 14 15
21
22
16 6 1211 17
23
24252627282930
8
7
10
9
201918