Panasonic HDC-SDT750PP User manual

Pa.aso.ic
Operating Instructions
High Definition Video Camera
Mo_e,No.HDC'SDT750PP
Before connecting, operating or adjusting this product, please read the instructions completely.
ZXVCH iE) _. F17DOLBY LEICA _,T.
O,G'TAL] OlcOMAR_'_"
5.1 CREATOR
H ml V TM
VQT3 B18

Things You Should
Know
Thank you for choosing Panasonic!
You have purchased one of the most
sophisticated and reliable products on
the market today. Used properly, we're
sure it will bring you and your family
years of enjoyment. Please take time to
fill in the information on the right.
The serial number is on the tag located
on the back of your camera. Be sure to
retain this manual as your convenient
camera information source.
fDate of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.
\
Safety Precautions
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE,
• DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR
SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, SHALL BE PLACED ON THE APPARATUS.
•USE ONLY THE RECOMMENDED ACCESSORIES.
•DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN
ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO
PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING,
ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE
VENTILATION VENTS.
The following mark and symbols are located on bottom of the unit.
CAUTION
CAUTION TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE. J,_
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
2
VQT3B18
The lightning flash with arrowhead
symbol, within an equilateral
triangle, is intended to alert the user
to the presence of uninsulated
"dangerous voltage" within the
product's enclosure that may be of
-- sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing)instructions
in the literature accompanying the
appliance.

THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
)articular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached installation
instructions and use only shielded interface cables with ferrite
core when connecting to computer or peripheral devices.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
Declaration of Conformity
Trade Name: Panasonic
Model No.: HDC-SDT750PP
Responsible party: Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Support Contact: Panasonic Consumer Electronics Company
1-800-211-PANA (7262)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
THE FOLLOWING APPLIES ONLY IN CANADA.
This Class B digital apparatus complies with Canadian ICES-003. I
3
VQT3B18

Batteries
1Battery pack (Lithium ion battery pack)
• Use the specified unit to recharge the battery pack.
• Do not use the battery pack with equipment other than the specified unit.
• Do not get dirt, sand, liquids, or other foreign matter on the terminals.
• Do not touch the plug terminals (÷ and ) with metal objects.
• Do not disassemble, remodel, heat or throw into fire.
2 Button-type battery (Lithium battery)
• Insert with poles aligned.
• Do not touch the terminals (+ and ) with metal objects.
• Do not recharge, disassemble, remodel, heat or throw into fire.
• Keep out of reach of children.
If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly
with water.
If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes
thoroughly with water, and then consult a doctor.
Warning
Risk of fire, explosion and burns. Do not disassemble.
Do not heat the batteries above the following temperatures or incinerate.
Button-type battery 60 °C (140 °F)
Battery pack 60 °C (140 °F)
AC adaptor
This AC adaptor operates on AC between 110 V and 240 V.
But
• In the U.S.A. and Canada, the AC adaptor must be connected to a 120 V AC power
supply only.
• When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor to
suit the AC outlet configuration.
• When connecting to a supply of greater than AC 125 V, ensure the cord you use is suited
to the voltage of the AC supply and the rated current of the AC adaptor.
• Contact an electrical parts distributor for assistance in selecting a suitable AC plug
adaptor or AC cord set.
The unit should be installed near an accessible AC power outlet, with the power cord
connected directly to it.
To completely disconnect power from the unit, unplug the power cord from the AC power
outlet.
•Product Identification Marking
Product Location
High Definition Video Camera Battery holder
AC adaptor Bottom
4
VQT3B18

rU.S.A./CANADA CONSUMERS: ATTENTION:
A lithium ion/polymer battery that is recyclable powers the product
_, _.._ you have purchased. Please call 1-800-8-BATTERY for information
on how to recycle this battery.
<For USA-California only>
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material -
special handling may apply.
See www.dtsc.ca.qov/hazardouswaste/perch orate.
5
VQT3B18

IMPORTANT SAFETY
INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety
instructions on the unit and the applicable safety instructions listed below. Keep these
operating instructions handy for future reference.
1)
2)
3)
4)
5)
6)
7)
8)
9)
Read these instructions. 11 )
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding-type
plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for
replacement of the obsolete outlet.
12)
13)
14)
Only use attachments/accessories
specified by the manufacturer.
Use only with the
cart, stand, tripod,
bracket, or table
specified by the
manufacturer, or
sold with the
apparatus. When a
cart is used, use caution when moving
the cart/apparatus combination to avoid
injury from tip-over.
Unplug this apparatus during lightning
storms or when unused for long periods
of time.
Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
10) Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where they exit from the
apparatus.
6
VQT3B18

Precautions
USE & LOCATION
•TO AVOID SHOCK HAZARD ... Your
camera and power supply should not be
exposed to rain or moisture. Do not
connect the power supply or operate your
camera if it gets wet. Your camera has
been designed for outdoor use, however it
is not designed to sustain direct exposure
to water, rain, sleet, snow, sand, dust, or a
direct splashing from a pool or even a cup
of coffee. This action could permanently
damage the internal parts of your camera.
Do not attempt to disassemble this unit.
There are no user serviceable parts
inside. Unplug your camera from the
power supply before cleaning.
• AS WITH ANY SMALL OBJECT, SD
CARDS CAN BE SWALLOWED BY
YOUNG CHILDREN. DO NOT ALLOW
CHILDREN TO HANDLE THE SD CARD.
•DO NOT AIM YOUR CAMERA AT THE
SUN OR OTHER BRIGHT OBJECTS
•DO NOT LEAVE THE CAMERA WITH
THE EVF AIMED DIRECTLY AT THE
SUN AS THIS MAY CAUSE DAMAGE TO
THE INTERNAL PARTS OF THE EVF
•DO NOT EXPOSE YOUR CAMERA TO
EXTENDED HIGH TEMPERATURE ...
Such as, in direct sunlight, inside a closed
car, next to a heater, etc... This action
could permanently damage the internal
parts of your camera.
•AVOID SUDDEN CHANGES IN
TEMPERATURE ... If the unit is suddenly
moved from a cold place to a warm place,
moisture may form on the SD card and
inside the unit.
•DO NOT LEAVE YOUR CAMERA OR
THE POWER SUPPLY TURNED ON
WHEN NOT IN USE.
•STORAGE OF YOUR CAMERA ... Store
and handle your camera in a manner that
will not subject it to unnecessary
movement (avoid shaking and striking).
Your camera contains a sensitive pick-up
device which could be damaged by
improper handling or storage.
CARE
• TO CLEAN YOUR CAMERA ... Do not
use strong or abrasive detergents when
cleaning your camera body.
• TO PROTECT THE LENS ... Do not touch
the surface of the lens with your hand.
Use a commercial camera lens solution
and lens paper when cleaning the lens.
Improper cleaning can scratch the lens
coating.
• TO PROTECT THE FINISH OF YOUR
CAMERA ... Before handling your
camera, make sure your hands and face
are free from any chemical products, such
as suntan lotion, as it may damage the
finish.
-If you see this symbol-
Information on Disposal in other
Countries outside the European
Union
"_ This symbol is only
valid in the European
Union.
If you wish to discard
this product, please
contact your local
authorities or dealer
and ask for the correct
method of disposal.
7
VQT3B18

•Indemnity about recorded
content
Panasonic does not accept any
responsibility for damages directly or
indirectly due to any type of problems that
result in loss of recording or edited content,
and does not guarantee any content if
recording or editing does not work properly.
Likewise, the above also applies in a case
where any type of repair is made to the unit.
•Cards that you can use with
this unit
SD Memory Card, SDHC Memory Card
and SDXC Memory Card
•4 GB or more Memory Cards that do not
have the SDHC logo or 48 GB or more
Memory Cards that do not have the SDXC
logo are not based on SD Memory Card
Specifications.
• Refer to page 23 for more details on SD
cards.
•For the purposes of these
operating instructions
• SD Memory Card, SDHC Memory Card
and SDXC Memory Card are referred to
as the "SD card".
• Functions that can be used for motion
picture recording/motion picture playback
indicated by _ in these
are
operating instructions.
• Functions that can be used for still picture
recording (including the still picture
recording in Motion Picture Recording
Mode)/still picture playback are indicated
by _ in these operating
instructions.
• Pages for reference are indicated by an
arrow, for example: -,) 0O
8
VQT3B18

Contents
Accessories ............................................ 11
Quick Guide ............................................ 12
Before using
[] Parts identification and
handling ...................................... 15
Setup
[] Power supply .............................. 19
Charging the battery .................... 19
Inserting/removing the battery ..... 20
Charging and recording time ........ 21
Connecting to the AC outlet ......... 22
[] Recording to a card ................... 23
Cards that you can use
with this unit ................................. 23
Inserting/removing an SD card .... 24
[] Turning the unit on/off ............... 25
Turning the unit on and off
with the power button ................... 25
Turning the unit on and off with the
LCD monitor/viewfinder ................ 25
Selecting a mode ....................... 26
[] Adjusting LOB monitor/
viewfinder ................................... 27
How to use the touch screen ....... 27
Viewfinder adjustment .................. 28
Recording showing the contents
to a partner ................................... 28
[] Setting date and time ................. 29
Recording/Playback
[] Before recording ........................ 30
[] Recording motion pictures ....... 31
[] Recording still pictures ............. 33
Recording still pictures in Motion
Picture Recording Mode .............. 34
Intelligent Auto Mode ................ 35
[] Motion picture/
Still picture playback ................. 37
Setup
[] Using the menu screen ............. 40
Using the quick menu .................. 41
[] Using the Setup Menu ............... 42
[] Using with the remote
control ......................................... 49
Operation of direction buttons/
OK button ..................................... 50
Recording (Advanced)
[] Zoom in/out function ................. 51
Ring zoom .................................... 51
Extra Optical Zoom ...................... 51
[] Image Stabilizer Function ......... 52
Optical Image Stabilizer Lock ...... 53
[] AF/AE tracking ........................... 54
[] 1080/60p recording .................... 55
[] Recording 3D video ................... 56
Functions not available during
3D recording ................................ 61
[] Recording functions of
operation icons .......................... 62
Operation icons ............................ 62
[] Recording functions of
menus ......................................... 68
[] Manual recording ....................... 86
White balance .............................. 87
Manual shutter speed/
iris adjustment .............................. 88
Recording with Manual focus ....... 89
Playback (Advanced)
[] Playback Operations ................. 90
Motion picture playback using
operation icon .............................. 90
Creating still picture from motion
picture .......................................... 91
Highlight&Time frame index ......... 92
Repeat playback .......................... 92
Resuming the previous
playback ....................................... 93
Zooming in on a still picture during
playback (Playback zoom) ........... 93
[] Various playback functions ...... 94
9
VQT3B18

Playingbackmotionpictures/
stillpicturesbydate.....................94
FaceHighlightPlayback/
HighlightPlayback/
intelligentSceneSelection...........95
Changingtheplaybacksettings
andplayingbacktheslideshow... 98
Editing
[] Deleting scenes/still pictures ... 99
Dividing a scene to partially
delete ......................................... 101
Deleting personal information .... 102
Protecting scenes/still pictures ... 102
[] DPOF setting ............................ 103
With a TV
[] Watching Video/
Pictures on your TV ................. 104
Connecting with
a HDMI mini cable ...................... 107
Listening in 5.1 channel sound... 107
Connecting with
the AV multi cable ...................... 107
[] 3D video playback .................... 108
Functions not available during
3D playback ............................... 109
[_ Playback using VIERA Link TM
(HDAVI Control TM) ..................... 110
With this unit/other products
[] Connecting a DVD burner to
copy to/play back a disc .......... 112
Preparing for copying/
playing back ............................... 112
Copying to discs ......................... 114
Playing back the copied disc ...... 118
Managing the copied disc .......... 119
[] Dubbing with a Blu-ray disc
recorder, video, etc .................. 120
Dubbing in high-definition picture
quality ......................................... 120
Dubbing in standard picture
quality ......................................... 122
Before using
[] What you can dowith a PC ..... 124
End User License Agreement .... 127
[] Operating environment ........... 128
Setup
[] Installation ................................ 131
[] Connecting to a PC .................. 133
About the PC display ................. 135
Using with a PC
[] Starting HD WriterAE 2.6T ...... 136
Reading the operating instructions
of the software applications ....... 136
[] If using Mac .............................. 137
Indications
[] Indications ................................ 138
[] Messages .................................. 141
About recovery ........................... 142
Troubleshooting .................................. 143
Cautions for use .................................. 149
About copyright ................................... 155
Recording modes/approximate
recordable time .................................... 156
Approximate number of recordable
pictures ................................................. 157
Specifications ...................................... 159
Optional accessories .......................... 164
Accessory Order Form (For USA
and Puerto Rico Customers) ..... 168
Limited Warranty (ONLY FOR U.S.A.
AND PUERTO RICO) ............................ 169
Warranty
(For Canadian Customers) .................. 171
Useful Information (Only For Latin
American Countries) ........................... 172
Index ..................................................... 173
10
VQT3B18

Accessories
Check the accessories before using this unit.
Keep the accessories out of reach of children to prevent swallowing.
Product numbers correct as of Aug. 2010. These may be subject to change.
Battery pack _Shoe adaptor
VW-VBG130 _,_-, _ VYC0996
AC adaptor
VSK0697
CD-ROM
Software
AC cable
K2CA2CA00025
DC cable
K2GJYDC00004
Remote control
(Built-in battery)
N2QAEC000024
AV multi cable
K1 HY12YY0004
USB cable
K1 HY04YY0032
3D Conversion Lens
Lens storage bag
VFC4619
Lens front cap*
VYK4K64
Lens rear cap*
VGQOM57
HDMI mini cable
VFA0531
Stylus pen
VGQOC14 ___
Lens hood
VDW2053 ©
This is attached to the 3D Conversion
Lens at the time of purchase.
11
VQT3B18

Quick Guide
• Charging the battery
/O Charging lamp
[CHARGE] O
02 Lights up:
Charging
_._ Goes off:
Charging completed
OConnect the AC cable to the AC adaptor
and the AC outlet.
I_ Insert the battery into the AC adaptor by
aligning the arrows.
•Inserting the battery
Install the battery by inserting it in the
direction shown in the figure.
1) Open the LCD monitor.
•Check that the access lamp has gone off.
2) Open the SD card/terminal cover and
insert (remove) the SD card into (from)
the card slot.
• Face the label side Q in the direction
shown in the illustration and press it
straight in as far as it will go.
• Press the center of the SD card and then
pull it straight out.
3) Securely close the SD card/terminal
cover.
• Securely close it until it clicks.
•Turning the unit on/off
Turning the unit on and off with the
power button
Press the power button to turn on the unit.
®/I
O Insert the battery until it clicks and locks.
• Inserting/removing an SD card O The status indicator lights on.
• To turn off the unit, hold down the power
button until the status indicator goes off.
Turning the unit on and off with the LCD
monitor/viewfinder
Opening the LCD monitor or extending the
viewfinder turns on the unit. Closing the LCD
monitor/viewfinder turns off the unit.
To turn on the unit
Access lam p [ACCESS] _
•When this un t s accessing the SD
card, the access lamp lights up. O The status indicator lights on.
12
VQT3B18

To turn off the unit
Q The status indicator goes off.
•Selecting a mode
Operate the mode dial to change the mode
to _, O or []
1)
2)
1)
2)
3)
Language selection
Press the MENU button, then touch
[SETUP] _ [LANGUAGE].
Touch [English].
Recording motion pictures
Change the mode to _ .
Open the LCD monitor or extend the
viewfinder.
Press the recording start/stop button to
start recording.
• Align with the status indicator O-
Motion Picture Recording
Jim Mode (-_ 31)
Still Picture Recording Mode
O(-_ 33)
[] Playback Mode (-> 37, 90)
O When you begin recording, | | changes
to O.
•Recording still pictures
1) Change the mode to O .
2) Open the LCD monitor or extend the
viewfinder.
3) Press the _ button fully to take the
picture.
•How to use the touch screen
You can operate by directly touching the
LCD monitor (touch screen) with your finger.
It is easier to use the stylus pen (supplied)
for detailed operation or if it is hard to
operate with your fingers.
Touch and release the touch screen to select
icon or picture.
13
VQT3B18

•Motion picture/Still picture
playback
1) Change the mode to [].
2) Touch the play mode select icon O.
3) Select the [VIDEO/PICTURE] you wish
to play back.
•Touch [ENTER],
4) Touch the scene or the still picture to be
played back,
(Motion picture playback)
•/11: Playback/Pause
,4<1: Rewind playback
• • : Fast forward playback
II: Stops the playback and shows
the thumbnails.
•: Displays the direct playback bar.
(-_ 91)
(Still picture playback)
•/I I: Slide show (playback of the still
pictures in numerical order) start/
pause.
<11: Plays back the previous picture,
II•: Plays back the next picture.
II: Stops the playback and shows
the thumbnails.
• Touch _ /_ to display/not-display the
operation icon.
Q _ is displayed when [1080/60p] is
touched or _,VCi4Dis displayed when
[AVCHD] is touched in step 3.
• Next (previous) page can be displayed by
touching _] /_].
5) Select the playback operation by
touching the operation icon.
(_ Operation icon
14
VQT3B18

Parts identification and
handling
2345 6
8910
1Speaker
2 Power button [_/I] (-) 25)
3 Inlet (cooling fan) (-) 30)
4 Intelligent auto/Manual button
[iA/MANUAL] (-) 35, 86)
5 Optical image stabilizer button
[((_))O.I.S.] (-) 52)
6 Eyepiece corrector dial (-) 28)
71080/60p button [1080/60p] (-) 55)
8 Battery release lever [BATT] (-) 20)
9 Battery holder (-) 20)
10 DC input terminal [DC IN] (-) 22)
•Always use the supplied AC adaptor or a
genuine Panasonic AC adaptor
(VW-AD21 PP-K; optional).
11 HDMI mini connector [HDMI]
(-) 104, 110)
12 USBterminal [_] (-) 113, 120, 133)
13 AV multi connector (-) 104, 122)
• Use the AV multi cable (only the supplied
cable).
14 Card slot (-) 24)
15 Access lamp [ACCESS] (-) 24)
16
19
16 Lens cover
• The lens cover opens in _ Motion
Picture Recording Mode or O Still
Picture Recording Mode. (-) 26)
17 Multi manual ring (-) 86, 89)
18 Camera function button
[CAMERA FUNCTION] (-) 86)
19 Remote control sensor (-) 50)
20 Built-in flash (-) 65)
21 3D Conversion Lens attachment part
(concave) (-) 56)
22 Lens (LEICA DICOMAR)
• Please refer to page 30 for details about
attaching the lens hood.
23 AF assist lamp (-) 85)
24 Recording lamp (-) 45)
15
VQT3B18

25 26 25 LCD monitor (Touch screen) (-) 27)
27 3O 31
•It can open up to 90L
@ G
•It can rotate up to 180 ° O towards the lens
or 90 ° Q towards the viewfinder.
Due to limitations in LCD production
technology, there may be some tiny bright
or dark spots on the LCD monitor screen.
However, this is not a malfunction and
does not affect the recorded picture.
26 Viewfinder (-) 28)
Due to limitations in LCD production
technology, there may be some tiny bright
or dark spots on the viewfinder screen.
However, this is not a malfunction and
does not affect the recorded picture.
27 Quick menu button [Q.MENU] (-) 41)
28 Sub recording start/stop button
(-'> 30)
• This button functions in the same manner
as the recording start/stop button.
29 Adjust zoom buttons (-) 51)
30 Menu button [MENU] (-) 40)
31 Delete button [ _ ] (-) 99)
32 Tripod receptacle
32
16
VQT3B18

36 37 38 39
33 Shoe adaptor mount (-) 166)
34 Shoe adaptor cover (-) 166)
35 Shoe adaptor release lever
[SHOE ADAPTOR RELEASE] (,-) 166)
36 Photoshot button [ O] (-) 33)
37 Zoom lever [W/T] (In Motion Picture
Recording Mode or Still Picture
Recording Mode) (-) 51)
Thumbnail display switch [ _I0_]1
Volume lever [-VOL-t-] (In Playback
Mode) (-) 39)
38 Status indicator (-) 25)
39 Internal microphones
40 Recording start/stop button (-) 31)
41 Mode dial (-) 26)
42 Shoulder strap fixture
43 Grip belt
Adjust the length of the grip belt so that it fits
your hand.
40 41 42 43
O Flip the belt.
I_ Adjust the length.
I_ Replace the belt.
44 Microphone terminal [MIC]
•A compatible plug-in powered microphone
can be used as an external microphone.
• Audio will be stereo (2 ch) with the
external microphone input.
• When the unit is connected with the AC
adaptor, sometimes noise may be heard
depending on the microphone type. In this
case, please switch to the battery for the
power supply and the noise will stop.
45 Headphone terminal [_] (-_ 67)
17
VQT3B18

•About the 3D Conversion Lens (-3, 56)
1 Attachment screw
2 Protective glass (front)
3 Lens
4 Adjustment dial cover
5 Vertical position adjustment dial
6 Vertical alignment adjustment dial
7Horizontal image position adjustment
dial[GI
8 Protective glass (rear)
9 Camera body attachment part
(convex)
Lens front cap
10
10 Horizontal line for adjustment
•Use to adjust the lens attachment position.
• If you use the lens front cap as a stand as
shown below, you can leave the unit with
the 3D Conversion Lens attached.
18
VQT3B18

Power supply
• About batteries that you can use with this unit
The battery that can be used with this unit is VW-VBGI30/VW-VBG260/VW-VBG6.
• The unit has a function for distinguishing batteries which can be used safely. The
dedicated battery (VW-VBG130/VW-VBG260/VW-VBG6) supports this function. The
only batteries suitable for use with this unit are genuine Panasonic products and
batteries manufactured by other companies and certified by Panasonic. (Batteries
which do not support this function cannot be used). Panasonic cannot in any way
guarantee the quality, performance or safety of batteries which have been
manufactured by other companies and are not genuine Panasonic products.
•To use the VW-VBG6 for this unit, the battery pack holder kit VW-VH04 (optional) is required.
It has been found that counterfeit battery packs which look very similar to the genuine
product are made available to purchase in some markets. Some of these battery packs
are not adequately protected with internal protection to meet the requirements of
appropriate safety standards. There is a possibility that these battery packs may lead
to fire or explosion. Please be advised that we are not liable for any accident or failure
occurring as a result of use of a counterfeit battery pack. To ensure that safe products
are used we would recommend that a genuine Panasonic battery pack is used.
When this unit is purchased, the battery is not charged. Charge the battery before
using this unit for the first time.
Important:
If the DC cable is connected to the AC adaptor, then the battery will not charge.
Remove the DC cable from the AC adaptor.
Charging lamp
[CHARG E] O
Lights up:
Charging (Battery charging time: -) 21)
Goes off:
Charging completed
Flashing:
Be sure to connect the unit
correctly. (_ 151 )
1Connect the AC cable to the AC adaptor and the AC outlet.
2Insert the battery into the AC adaptor by aligning the arrows.
19
VQT3B18

• WerecommendusingPanasonicbatteries(-)11,21,164).
• Ifyouuseotherbatteries,wecannotguaranteethequalityofthisproduct.
• Donotheatorexposetoflame.
• Donotleavethebattery(ies)inanautomobileexposedtodirectsunlightforalongperiod
oftimewithdoorsandwindowsclosed.
Install the battery by inserting it in the direction shown in the figure.
Removing the battery
Be sure to hold down the power
button until the status indicator
goes off. Then remove the battery
while supporting the unit to prevent
it from dropping.
Move the battery release lever in
the direction indicated by the
arrow and remove the battery
when unlocked.
O Insert the battery until it clicks and
locks. _ _
CAUTION
Danger of explosion if battery is
incorrectly replaced. Replace only with
the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to
the manufacturer's instructions.
20
VQT3B18