Panasonic TM 300 User manual

Panasonic TM 300 Video Camera Quick Check and Setup List
Press the iA button on the
camera and look in the
viewfinder for confirmation
The initial steps in the standard setup is performed with the camera in iA mode.
Press MENU and work your way through the settings in the illustrations
The next steps in the
standard setup are
performed with the iA mode
OFF
Press the AI button on the camera again and look in
the viewfinder for confirmation = no symbol.
Follow the steps below and change the settings so
they correspond with the settings in the pictures.
It´s important to activate the iA function again !!
4
567
10
Press the iA button
again to activate iA
16
8 9
3
...AND FINALLY!
1513
SELECT
1
SELECT
2
SELECT

Panasonic TM 300 Video Camera Batteries, memory etc.
3
Charging the batteries. A full charge will
take 2-3 hours. The camera will run 60-90
minutes on a full charge.
Formatting the built-in memory card. Follow the 3 steps: SETUP - FORMAT - OK
Take care when the HDD ACCESS lamp is ON.
Do not turn off the camera or remove USB cable
Connecting the camera to the computer:
1) Turn on the camera
2) Connect via USB cable
3) Select PC on camera´s touch screen
When the camera is conected to the PC:
Do not disconnect the USB cable while
the acces lamp is on or the card access
symbol
is visible on the touch screen
Do not disconnect the USB cable while
the memory access icon
appears on the touch screen.