Panasonic KX-TG2216CS User manual

Preparation Useful InformationAdvanced OperationBasic Operation
PLEASE READ BEFORE USE AND SAVE.
For assistance, please call 1-800-561-5505 or visit us at www.panasonic.ca
Charge the battery for about 6 hours before initial use.
KX-TG2216CS
Call Display Compatible
2.4 GHz Digital Cordless Phone
Operating Instructions
Model No.
KX-TG2216CS
KX-TG2216CW
Pulse-or-tone dialing capability

2
Thank you for purchasing your new Panasonic cordless
telephone.
Accessories
(included)
Call Display, Call Waiting and Voice Mail Service, where available, are telephone
company services. After subscribing to Call Display this phone will display a
caller’s name and phone number. Visual Call Waiting/Call Waiting Deluxe, which
displays a second caller’s name and phone number while the user is on another
call, requires a subscription to both Call Display and Call Waiting.
After subscribing to Voice Mail Service, this phone’s message waiting lamp will
flash when there are messages in the mailbox.
AC Adaptor (p. 8)
one
Telephone Line Cord
(p. 8)
one
Battery (p. 9)
one
Wall Mounting Adaptor (p. 40)
one
Belt Clip (p. 42)
one

3
For Best Performance
Battery Charge
A rechargeable Nickel-Metal Hydride (Ni-MH) battery
powers the handset. Install the battery in the handset (p. 9)
and charge the battery for about 6 hours before initial use
(p. 10).
Base Unit Location/Noise
Calls are transmitted between the base unit and the handset using wireless radio
waves. For maximum distance and noise-free operation, the recommended
base unit location is:
Note:
• If you use the handset near a microwave oven which is being used, noise may be
heard from the receiver or the speaker. Move away from the microwave oven and
closer to the base unit.
• If you use the handset near another cordless phone, noise may be heard. Move
away from the other cordless phone and closer to your base unit.
Away from electrical appliances
such as a TV, personal computer
or another cordless phone.
In a HIGH and CENTRAL location
with no obstructions such as walls.
Raise the
antenna.

4
Contents
Location of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing the Battery in the Handset . . . . . . . . . . . . . . . . . . . . . . . . . 9
Selecting the Display Language . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Battery Charge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Programmable Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Programming Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Function Menu Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Dialing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Line Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Voice Enhancer Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Auto Talk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
LCD Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Ringer Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Ringer Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Call Display Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Using the Caller List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Viewing the Caller List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Calling Back from the Caller List . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Editing the Caller’s Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . 24
Storing Caller Information in the Phone Book . . . . . . . . . . . . . . . . 25
Erasing Caller Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Preparation
Basic Operation
PQQX13775ZATOC.fm 4 ページ ２００３年１０月２日 木曜日 午後１時２６分

Preparation Useful InformationAdvanced OperationBasic Operation
Contents
5
Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Storing Names and Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Dialing from the Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Editing an Item in the Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . 30
Erasing an Item in the Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . 30
Voice Mail Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Storing a Voice Mail Access Number . . . . . . . . . . . . . . . . . . . . . . . 31
Setting Voice Mail (VM) Tone Detection . . . . . . . . . . . . . . . . . . . . . 32
Listening to Voice Mail Messages . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Special Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Automatic Security Code Setting . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Handset Locator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Temporary Tone Dialing
(For Rotary or Pulse Service Users) . . . . . . . . . . . . . . . . . . . . . . 34
Muting Your Conversation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Using the PAUSE Key
(For PBX Line/Long Distance Calls) . . . . . . . . . . . . . . . . . . . . . . 35
For Call Waiting Service Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Call Waiting Deluxe Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
FLASH Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Belt Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Optional Headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Direct Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Advanced Operation
Useful Information
PQQX13775ZATOC.fm 5 ページ ２００３年１０月２日 木曜日 午後１時２６分

6
Location of Controls
Base unit
Charge Contacts (p. 11)
[HANDSET LOCATOR] (p. 34)
Antenna (p. 3)
IN USE/CHARGE Indicator
(p. 10, 20, 34)
VM (Voice Mail) Indicator (p. 31)
X13775ZA2.fm 6 ページ ２００３年１０月２日 木曜日 午後１時２７分

Preparation
Location of Controls
7
Handset
How to use the soft keys/navigator key
Soft keys:
Two soft keys are used to select functions displayed
directly above the keys. Functions displayed above the
keys will change depending on the state of use.
For example, to operate “ Hold ”, press the right soft
key.
• When a function does not appear above a soft key,
the soft key will not work.
Navigator key:
Scrolls through the function menu, the Caller List and
the phone book (works as a scroll key).
Adjusts the handset ringer and receiver/speaker
volumes (works as a volume key).
Throughout these Operating Instructions:
• The soft keys are indicated with the display above the keys.
e.g. “Press Hold .” indicates “Press the soft key below Hold ”.
• The navigator key is indicated by the arrows [] or [] .
Antenna
Display
Receiver
Soft Keys
(see below)
[OFF] (p. 12, 18)
[MENU] (p. 12)
[MUTE] (p. 34)
Back side
Speaker
Headset Jack (p. 42)
[](TALK/Channel) (p. 18, 19)
[](Speakerphone/
Channel) (p. 18, 19)
[](TONE) (p. 34)
[FLASH/CALL WAIT] (p. 35, 39)
[REDIAL] (p. 19)
Charge Contact (p. 11)
Navigator Key
([], []) (see below)
>
>
Microphone (p. 18)
Charge Contact (p. 11)
1
Talk 00-00-32
(VE) Hold
2
VOL.
>
>
X13775ZA2.fm 7 ページ ２００３年１０月２日 木曜日 午後１時２７分

8
Settings
Connections
• USE ONLY WITH Panasonic AC ADAPTOR PQLV19.
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
• If your unit is connected to a PBX which does not support Call Display, you cannot
access Call Display services.
• The unit will not work during a power failure. If you want to connect a standard
telephone on the same line, use a T-adaptor.
Fasten the AC
adaptor cord.
Hooks
Single-Line Telephone Jack (CA11A)
Telephone Line Cord
Power Outlet
(AC 120 V, 60 Hz)
AC Adaptor
Raise the
antenna.
X13775ZA2.fm 8 ページ ２００３年１０月２日 木曜日 午後１時２７分

Preparation
Settings
9
Installing the Battery in the Handset
1
Pull down the latch ( ), and
remove the cover ( ).
2
Insert the battery ( ), and
press it down until it snaps into
the compartment ( ).
3
Close the cover ( and ).
4 Push the latch upward until it snaps
shut.
• After installing the battery, set the display language. (See page 10.)
To replace the battery:
Pull down the latch, and remove the cover. Replace the old battery with a new one
(p. 11). Close the cover and charge the battery for about 6 hours.
1
2
Latch
1
2
34
3
4
5
6
5 6
X13775ZA2.fm 9 ページ ２００３年１０月２日 木曜日 午後１時２７分

Settings
10
Selecting the Display Language
After installing the battery in the handset, the handset display will prompt you to set
the display language to English or French.
To change the display language
Battery Charge
Place the handset on the base unit and charge
for about 6 hours before initial use.
Repeat charging will require approximately the
same amount of charging time (6 hours) if the
battery is depleted completely.
•The IN USE/CHARGE indicator lights and the
unit beeps once.
•It is normal for the back of the handset to feel
warm during battery charge.
If you do not set a display language, the following functions will not work
properly:
—the [MENU] button
—storing or viewing the phone book items
—viewing the caller list items
1
Press English or Franç.
2
Press Save or Sauv.
•You can also select a language by pressing [] or
[] before pressing Save or Sauv.
1
Press [MENU] .
2 Scroll to “ Initial setting ”by pressing []
or [] , then press Select .
3
Scroll to “ Change language ”by pressing []
or [] , then press Select .
4
Select the language by pressing Franç. or
English .
5 Press Sauv. or Save , then press [OFF].
Select language
Franç. English
>
>
Select language
:English
Franç. Save
e.g. English was
pressed.
>
>
Initial setting
Exit Select
>
>
>
>
Change language
Back Select
>
>
Change language
:English
Franç. Save
IN USE/CHARGE
Indicator
X13775ZA2.fm 10 ページ ２００３年１０月２日 木曜日 午後１時２７分

Preparation
Settings
11
Battery strength
Recharge
Recharge the battery when:
—“ Recharge battery ”is displayed on the handset,
—“ ” flashes, or
—the handset beeps intermittently while it is in use.
•If you DO NOT recharge the handset battery for more than 15 minutes, the display
will continually indicate “ Recharge battery ”and/or “”will flash when the
handset is lifted off the base unit.
A nickel metal hydride battery that is recyclable powers the
product you have purchased. Please call 1-800-8-BATTERY for
information on how to recycle this battery.
Battery information
•The battery operating time may be shortened depending on usage conditions and
ambient temperature.
• Clean the charge contacts of the handset and the base unit with a soft, dry
cloth once a month. Clean more often if the unit is subject to grease, dust or
high humidity. Otherwise the battery may not charge properly.
•If the battery is fully charged, you do not have to place the handset on the base
unit until “ Recharge battery ”is displayed and/or “”flashes. This will
maximize the battery life.
•The battery cannot be overcharged.
You can check the battery
strength on the handset display.
The battery strength is as shown
in the chart on the right.
Display prompt Battery strength
Fully charged
Medium
Low
(flashing) Needs to be recharged.
Battery replacement:
If you cleaned the charge contacts and fully charged the battery, but after a few
telephone calls, “ Recharge battery ”is displayed and/or “”continues to
flash, the battery needs to be replaced. Use a new Panasonic HHR-P513
battery. To replace the battery, see page 9.
After your Panasonic battery
is fully charged:
Operation Operating time
While in use (TALK) Up to 5 hours
While not in use (Standby) Up to 11 days
Recharge battery
X13775ZA2.fm 11 ページ ２００３年１０月２日 木曜日 午後１時２７分

12
Programmable Functions
Programming Guidelines
This unit has programmable functions. They are selected from the function menu on
the display (p. 13).
Buttons/Keys
How to select a function item from the menu
Make sure the unit is not being used and the handset is lifted off the base
unit before programming.
Operation Display
1
Press [MENU] to enter menu mode.
•The main menu is displayed (p. 13).
2
Scroll to the desired item by pressing [] or
[] .
• How to use the Exit key:
Press Exit to exit programming mode.
3
Press Select at your desired menu.
4
If your selected menu has a sub-menu, it will be displayed. Repeat
steps 2 and 3 until your desired menu is displayed.
5
Select your desired setting by pressing [] or
[] .
• How to use the Back key:
Press Back to go back to the previous menu.
6
Press Save to save your setting.
•A confirmation tone will be heard and the setting will be saved.
7
Press [OFF] to exit programming mode.
VOL.
[MENU] :
allows you to enter the
menu by pressing while the
handset is not being used.
When “”or “”is
displayed, you can use the
navigator key []or []as
a scroll key.
>
>
>
>
[OFF] :
allows you to exit
programming mode at any
time.
Soft keys :
work as function keys when
a function is displayed
above a soft key.
>
>
Initial setting
Exit Select
>
>
Exit Select
>
>
Back Save
X13775ZA2.fm 12 ページ ２００３年１０月２日 木曜日 午後１時２７分

Preparation
Programmable Functions
13
Useful information:
•If Select is pressed while “ ---(Go back)--- ”is displayed, the unit will go
back to the previous menu mode. If you press the key in the main menu, the unit
will exit programming mode.
•After programming is complete, the display will return to the main menu or the
sub-menu depending on which menu the selected item is located. (See the menu
table below.)
•You can exit programming mode at any time by pressing [OFF] .
•If you do not press any buttons for 60 seconds, the handset will exit programming
mode.
•If the handset has lost communication with the base unit, the handset beeps
3 times and “ No link to base. Place on cradle and try again. ”is
displayed.
•If [] , [] or any other buttons except [MUTE] and [OFF] is pressed while the
handset is on the base unit, the handset beeps 3 times and “ Please lift up
and try again. ”is displayed. Lift the handset and press the button again.
Function Menu Table
You can use the following functions to customize your unit. See the corresponding
pages for function details.
•After pressing [MENU] , you can also program menu items by direct commands
( [0] to [9] ) instead of using the soft keys (p. 43).
Set flash time
Set line mode
Main menu Sub-menu ISub-menu II
Ringer setting
V.M. access
Initial setting
LCD contrast
Auto talk
Voice enhancer
Store VM access#
VM tone detect
Set tel line
Voice Mail
Change language
Set dial mode
Ringer volume
Ringer tone
C.WTG options
p. 14
p. 39
p. 14
p. 32
p. 15
p. 33
p. 17
p. 17
p. 16
p. 16
p. 10
p. 31
p. 36
X13775ZA2.fm 13 ページ ２００３年１０月２日 木曜日 午後１時２７分

Programmable Functions
14
Dialing Mode
If you have touch tone service, set to “Tone”. If rotary or pulse service is used, set
dialing mode to “Pulse”. The factory preset is “Tone”.
Line Mode
The line mode is preset at the factory to “B”. Generally leave the line mode “B”.
If a change of the line mode setting is suggested by our customer call centre or
service person, change the line mode to “A”.
1
Press [MENU] .
2
Scroll to “ Initial setting ”by pressing []
or [] , then press Select .
3
Scroll to “ Set tel line ”by pressing [] or
[] , then press Select .
4
Press Select at “ Set dial mode ”.
5
Select “ Pulse ”or “ Tone ”by pressing [] or
[] .
6
Press Save , then press [OFF] .
1 Press [MENU] .
2 Scroll to “ Initial setting ”by pressing []
or [] , then press Select .
3Scroll to “Set tel line”by pressing []or
[], then press Select.
4Scroll to “Set line mode”by pressing []or
[], then press Select.
5Select “A”or “B”by pressing []or [].
6Press Save, then press [OFF].
>
>
Initial setting
Exit Select
>
>
>
>
Set tel line
Back Select
>
>
Set dial mode
Back Select
>
>
>
>
Set dial mode
:Tone
Back Save
>
>
>
>
Initial setting
Exit Select
>
>
>
>
Set tel line
Back Select
>
>
>
>
Set line mode
Back Select
>
>
>
>
Set line mode
:B
Back Save
>
>
X13775ZA2.fm 14 ページ ２００３年１０月２日 木曜日 午後１時２７分

Preparation
Programmable Functions
15
Voice Enhancer Technology
Voice Enhancer Technology ( ) helps clarify and improve sound reception
creating a natural-sounding voice that is easy to hear and understand.
This is accomplished by enhancing the frequency that is narrowed through the
telephone line and comes pre-set to OFF at the factory.
Under normal conditions, cordless phones are limited to a narrowed frequency
bandwidth (300Hz to 3.5KHz). Panasonic’s new Voice Enhancer Technology
cordless phones are able to simulate a band signal above and below the normal
bandwidth limitations. As a result, a clearer, crisp sound much closer to the actual
voice is achieved.
•“ ”is displayed when the Voice Enhancer Technology is set to ON.
Helpful hint:
Depending on the condition and quality of your telephone line, Voice Enhancer may
emphasize the noise already on the line. If it becomes difficult to hear the caller,
please set Voice Enhancer mode to OFF.
To turn the mode ON while talking, press (
VE
) .
•“ ”is displayed.
•Each time you press (VE) , the mode will change to ON
or OFF.
•If you store a voice mail access number (p. 31), “ VM ”will
be displayed instead of “ (VE) ”for 15 seconds after
pressing [] or [] .
1
Press [MENU] .
2
Scroll to “ Voice enhancer ”by pressing []
or [] , then press Select .
3
Select “ On ”or “ Off ”by pressing [] or [] .
4
Press Save , then press [OFF] .
>
>
Voice enhancer
Exit Select
>
>
>
>
Voice enhancer
:Off
Back Save
>
>
Talk 00-00-32
(VE) Hold
X13775ZA2.fm 15 ページ ２００３年１０月２日 木曜日 午後１時２７分

Programmable Functions
16
Auto Talk
The Auto Talk feature allows you to answer a call by lifting the handset off the base
unit without pressing
[] or [] . To use this feature, turn the feature ON. The
factory preset is OFF.
•In order to view Caller information after you lift up the handset to answer a call,
leave the Auto Talk feature OFF.
LCD Contrast
You can select the handset LCD contrast (5 levels). The factory preset is level 3.
1
Press [MENU] .
2
Scroll to “ Initial setting ”by pressing []
or [] , then press Select .
3
Scroll to “ Auto talk ”by pressing [] or [] ,
then press Select .
4
Select “ On ”or “ Off ”by pressing [] or [] .
5
Press Save , then press [OFF] .
1 Press [MENU] .
2
Scroll to “ Initial setting ”by pressing []
or [] , then press Select .
3
Press Select at “LCD contrast”.
4Select the desired contrast by pressing []or
[].
•Each time you press []or [], the LCD contrast
will change.
5Press Save, then press [OFF].
>
>
Initial setting
Exit Select
>
>
>
>
Auto talk
Back Select
>
>
>
>
Auto talk
:Off
Back Save
>
>
>
>
Initial setting
Exit Select
>
>
LCD contrast
Back Select
>
>
>
>
>
>
LCD contrast
Low High
Back Save
>
>
X13775ZA2.fm 16 ページ ２００３年１０月２日 木曜日 午後１時２７分

Preparation
Programmable Functions
17
Ringer Volume
You can select the handset ringer volume HIGH, MEDIUM, LOW or OFF.
The factory preset is HIGH. If set to OFF, the handset will not ring.
•If set to OFF, the handset displays “ Ringer off ”while not in use. But if there are
missed calls and the handset is off the base unit, the handset will not display
“ Ringer off ”.
•You can select the ringer volume while an external call is being received. Press
[] or [] while the unit is just ringing. To set to OFF, press and hold [] .
“ Ringer off ”is displayed.
Ringer Tone
You can select one of 6 ringer tones for external calls on the handset.
The factory preset is 1.
1
Press [MENU] .
2
Press Select at “ Ringer setting ”.
3
Press Select at “ Ringer volume ”.
4
Select the desired volume level by pressing
[] or [] .
•The volume will change and ring.
•The number of steps indicates the volume level.
• To turn the ringer OFF, press [] repeatedly
until “ Ringer off ”is displayed.
5
Press Save , then press [OFF] .
1
Press [MENU] .
2
Press Select at “ Ringer setting ”.
3
Scroll to “ Ringer tone”by pressing []or
[], then press Select.
4Select the desired tone by pressing []or [].
•If the handset ringer volume has been set to OFF,
the unit will not ring (see above).
•You can also select a ringer tone by pressing
dialing buttons [1] to [6].
5Press Save, then press [OFF].
Ringer setting
Exit Select
>
>
Ringer volume
Back Select
>
>
>
>
>
Ringer volume
Low High
Back Save
>
>
e.g. HIGH
>
>
>
Ringer setting
Exit Select
>
>
>
>
Ringer tone
Back Select
>
>
>
>
Ringer tone
:1
Back Save
>
>
X13775ZA2.fm 17 ページ ２００３年１０月２日 木曜日 午後１時２７分

18
Making Calls
To have a hands-free phone conversation
• If the handset has lost communication with the base unit, the handset beeps
3 times and “ No link to base. Place on cradle and try again. ” is
displayed.
• If [] , [] or any other buttons except [MUTE] and [OFF] is pressed while the
handset is on the base unit, the handset beeps 3 times and “ Please lift up
and try again. ” is displayed. Lift the handset and press the button again.
1
Press
[]
.
•“ Talk ” is displayed.
2
Dial a phone number.
• The dialed number is displayed.
• After a few seconds, the display will
show the length of the call.
3
To hang up, press [OFF] or place
the handset on the base unit.
1
Press
[]
.
•“ SP-phone ” is displayed.
2
Dial a phone number.
• The dialed number is displayed.
• After a few seconds, the display will show the length of the call.
3
When the other party answers, speak into the microphone.
4 To hang up, press [OFF] or place the handset on the base unit.
Hands-free Digital Duplex Speakerphone
For best performance, please note the following:
• Speak alternately with the other party in a quiet room.
• If you or the other party has hearing difficulty, press [] to decrease the
speaker volume.
• While talking using [] , you can switch to the hands-free phone conversation
by pressing [] . To switch back to the receiver, press [] .
Display
[],[]
>
>
[]
[]
[REDIAL]
Microphone
[OFF]
Soft Keys
>
X13775ZA3.fm 18 ページ ２００３年１０月２日 木曜日 午後１時２８分

Basic Operation
Making Calls
19
To dial after confirming the
entered number
If noise interferes with the
conversation
Have the unit select a clearer
channel by doing one of the
following:
Press [] (Channel) if talking
using [] ,
press [] (Channel) if talking
using [] , or
press CH , which is displayed when
you adjust receiver or speaker
volume (p. 20).
OR
Walk closer to the base unit.
To redial the last number
dialed
To redial using the redial
list (Memory Redial)
The last 5 phone numbers dialed with
the handset are stored in the redial list.
• To erase an item, scroll to the
desired item then press Erase .
• If “ No items stored ” is displayed,
the list is empty.
To put a call on hold
To return to the call, press [] or
[] .
• If another phone is connected on the
same line, you can also return to the
call by lifting its handset.
• If a call is kept holding for 6 minutes,
an alarm tone will start to sound. After
4 additional minutes on hold, the call
will be disconnected.
• The alarm volume corresponds to the
ringer volume level (p. 17). If the
ringer is OFF, the alarm will sound at
the LOW level.
1
Enter a phone number.
• If you misdial, press Clear . Enter
the correct number.
• If a pause is required for dialing,
press Pause where needed
(p. 35).
• To cancel, press [OFF] .
2
Press [] or [] .
3
To hang up, press [OFF] or
place the handset on the base
unit.
Press [] or [] , then press
[REDIAL] .
3334444
Clear Pause
1
Press [REDIAL] .
• The last number dialed is
displayed.
2
Scroll to the desired number by
pressing [] or [] .
• You can also scroll through the list
by pressing [REDIAL] .
• To exit the list, press [OFF] or
Exit.
3Press []or [].
Press Hold during a conversation.
•“Hold” is displayed.
333-4444
Exit Erase
>
>
>
>
Talk
00-00-08
(VE) Hold
X13775ZA3.fm 19 ページ ２００３年１０月２日 木曜日 午後１時２８分

20
Making Calls
To adjust the receiver/speaker volume while talking
3 levels (HIGH, MEDIUM and LOW) are available for the receiver and 6 levels for
the speaker.
To increase volume, press [] .
To decrease volume, press [] .
• The display shows the current volume setting.
• If you try to increase/decrease volume when it is at
the maximum/minimum level, the handset will beep
3 times.
Backlit LCD display
The lighted display of the handset will stay on for a few seconds after pressing a
button or lifting the handset off the base unit.
Lighted handset keypad
The handset dialing buttons will light when you press a button or lift the handset off
the base unit. The light will go out after a few seconds.
Answering Calls
When a call is received, the unit rings and “ Incoming call ” is displayed, and the
IN USE/CHARGE indicator on the base unit flashes rapidly. If you subscribe to a
Call Display service, see page 21.
• When the ringer volume is set to OFF, the unit will not ring (p. 17).
1
Press [] or
[]
.
• You can also answer a call by pressing
any button except [] , [] and [OFF] .
2
To hang up, press [OFF] or place the
handset on the base unit.
Auto Talk:
If you set the Auto Talk feature to ON (p. 16),
you can answer a call by lifting the handset off
the base unit.
e.g. Receiver volume: HIGH
Speaker volume: level 6
Volume
Low High
CH Hold
>
>
>
>
[OFF]
[]
[]
X13775ZA3.fm 20 ページ ２００３年１０月２日 木曜日 午後１時２８分