Panasonic CT-31G30T User manual

Color Television
Operating Instructions ®
Read these instructions completely before operating this set.
Contents subject to change without notice or obligation. Printed in U.S.A.
TQB2A09431

Safety Instructions
WARNING
WARNING: To reduce the risk of electric shock do not remove cover or back. No
user-serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with ar-
_row-head within a triangle _
is intended to tell the user
that partsinside the product
are a riskofelectric shockto
persons.
The exclamation point within
a triangle is intended to tell
the userthat important oper-
ating and servicing instruc-
tions are in the papers with
the appliance.
Note To CATV System Installer: This reminder isprovided to call the CATV system installer's attentionto Article
820-40 ofthe NEC thatprovides guidelines for proper grounding and, inparticular, specifiesthat the cable ground shallbe
connected to the groundingsystem of the building,as close to the point of cable entry as practical.
Safety Instructions For Television Receivers
1. Read and apply the operating instructionsprovided with your television receiver.
2. Read all ofthe instructionsgiven here and retainthem for later use.
3. Unplug this television receiver from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp
clothfor cleaning.
4. Do not use attachments not recommended bythe television receiver manufacturer as they may cause hazards.
5. Do not use this television receiver near water. For example: Avoid placing it near a bathtub, washbowl, kitchensink,or
laundrytub, in a wet basement, or near a swimming pool, etc.
6. Do notplace thistelevision receiver on an unstable cart,stand, o_table. The television receiver may fall, causingserious
injuryto achild or adult, and serious damage to the appliance. Use only with a cart or stand recommended by the
manufacturer, or sold with the television receiver. Wall or shelf mounting shouldfollow the manufacturer'sinstructions,
and should use a mounting kit approved by the manufacturer.
6A. An appliance and cart combination should be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart combination to overturn.
7. Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to insure
reliable operation of the television receiver and to protect it from overheating. These openings must not be blocked or
covered. The openings should never be blocked by placing the television receiver on a bed, sofa, rug or other similar
surface_ This television receiver should never be placed near or over a radiator or heat register. This television receiver
should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.
8. Operate only from the type of power source indicated on the marking label. If you are not sure of the type of power
supplied to your home consult your television dealer or local power company. For television receivers designed to
operate from battery power, refer to the operating instructions.
9. This television receiver is equipped with a polarized alternating-current line plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your
electricianto replaceyourobsolete outlet. Do
notdefeat the safetypurpose ofthe polarized
plug.
10. Do not allow anything to rest on the power
cord. Do not locate this television receiver
where the cord will be abused by persons
walking on it.
11. Follow all warnings and instructionsmarked
on the television receiver.
12. Do not overload wall outlets and e_ension
cords as this can result in fire or electric
shock.
13. Never push objects of any kind into this
television receiver through cabinet slots as
they may touch dangerous voltage points or
short out parts that could result in afire or
electric shock. Never spill liquidofany kind on
the television receiver.
EXAMPLE OF ANTENNA GROUNDING AS _ANTENNALEAD-IN
PER (NEC) NATIONAL ELECTRICAL COD E _ _RE
// . _l_]_],,,,I.__, _1 ANTENNA •
/ ! I _/" j. DISCHARGEUNIT
IELECTRIC / /_= ICO. CTO,S
EQUIPMENT N C
_.._..,._ENT _ _ (I E SECTION 810-21)
_GROUND CLAMPS
_ • POWER SERVICE GROUNDING
---L.,._l--"-'--"_ ELECTRODE SYSTEM
(NEC ART 250, PART H)
-2-

14.Ifanoutside antenna is connected to the television equipment, besure the antenna system isgroundedso asto provide
some protection against voltage surges and built up static charges. In the U.S. Section 810 of the National Electrical
Code and inCanada Part 1 ofthe Canadian Electrical Code provides informationwith respect topropergroundingofthe
mast and supportingstructure,groundingofthe lead-in wireto an antenna discharge unit,size ofgroundingconductors,
locationofantenna-discharge unit, connectionto groundingelectrodes, and requirements for thegroundingelectrode.
See Figure.
15. For added protectionfor thistelevision receiver duringa lightningstorm,or when itisleftunattended and unusedfor long
periodsoftime, unplugitfrom the wall outletand disconnectthe antenna. This willprevent damage tothe receiverdue to
lightning and power-line surges.
16. An outside antenna system should not be located inthe vicinityof overhead power lines or other electric lightor power
circuits,or where it can fall intosuch power lines or circuits.When installingan outside antenna system extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
17. Unplugthis television receiverfrom the wall outlet, and refer servicingto qualifiedservice personnel underthe following
conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquidhas been spilled intothe television receiver.
c. Ifthe television receiver has been exposed to rain or water.
d. Ifthe televisionreceiver does notoperate normallybyfollowing the operating instructions.Adjustonlythose controls
thatare covered bythe operating instructionsas improper adjustment ofothercontrolsmay resultindamage and will
often require extensive work by a qualified technician to restore the television receiver to normal operation.
e. Ifthe television receiver has been dropped or the cabinet has been damaged.
f. When the television receiver exhibits a distinct change in performance - this indicates a need for service.
18. Do notattempt to service this television receiver yourself as opening or removingcovers may expose you todangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
19. When replacement parts are required, be sure the service technician has used replacement parts specified by the
manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire,
electric shock, or other hazards.
20. Upon completion of any service or repairs to this television receiver, ask the service technician to perform routine safety
checks to determine that the television is in safe operating condition.
21. WARNING: To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
22. CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
NOTE: Thisequipment isdesigned tooperate inthe U.S.A., Canada and othercountrieswhere the broadcastingsystem and
AC housecurrent is exactly the same as inthe U.S.A. and Canada.
Important Information Regarding Use of Video Games, Computers, Teletext or Other Fixed Image Displays.
The extended use of fixed image program material can cause a permanent "shadow image" on the picture tube. This
backgroundimage isviewable on normalprograms in the formof a stationary fixed image. This type ofirreversible picture
tube deterioration can be limited by observing the followingsteps:
A, Reduce the brightness/contrast setting to a minimum viewing level.
B, Do not display the fixed image for extended periods oftime.
C. Turn the power offwhen not in actual use.
NOTE: The marking or retained image on the picture tube resultingfrom fixed image use is not an operating defect and as
suchisnotcovered byWarranty. This productisnotdesigned to display fixedimage patterns forextended periodsof
time.
Power Source:
Channel Capability:
Video Input Jacks (2):
Audio Input Jacks (2):
To Audio AMP Jacks:
S-VHS Input Jack:
Stereo Sound
Surround Sound
Closed Caption Display
Picture in Picture:
Specifications
120V 60Hz, AC
181 channels (See chart)
VHF 2-13, UHF 14-69, Cable 125 channels
1V p-p, 75 ohm, phono jack type
High impedance - 10K ohm, 500mV rms
0-4.0V rms 10K ohm
.S-Video (Y-C) Connector
Two Tuner
Specifications are subject to change without notice or obligation.
Channel Capability Chart
BAND USA/CAN
VHF 12
UHF •56
CABLE (Mid-Band) 15
CABLE (Super Band) 14
CABLE (Hyper Band) 28
CABLE (Ultra Band) 56
TOTAL CHANNELS 181
-3-

Introduction
Congratulations on Your New Purchase
Yournew videocomponent features an all solid state chassis which isdesignedto give you manyyears ofenjoyment. It
was thoroughlytested and adjusted at the factory for best performance.
In order foryou totake fulladvantage ofyour newvideo component, please read and followthe installationand operating
instructionssupplied with this product.
Customer's Record
The model and serial number ofthis productmay befound on itsback cover.Youshouldnotethe model and serial number
inthe space provided and retain this book as a permanent record of yourpurchase to aid in identificationin the event of
theft or loss.
Model Number: Serial Number:
Table of Contents
Safety Instructions ............................. 2
Specifications ................................. 3
Introduction ................................... 4
Installation ........ ...... ...................... 5
Receiver Location .............................. 5
Optional Extemal Equipment Connections ........ 5
AC Power Supply Cord ......................... 5
Battery Installation ............................. 5
Antenna/Cable Connections ..................... 6
Picture in Picture External Video & Ant Connection. 7
Location of Controls (Remote) .................. 8
Location of Controls (Receiver) ................. 9
Quick Reference Control Operation .............. 9
Control Operation . ............ ..... :.......... 10
Power Button ....... :......................... 10
Volume (Vol) Buttons .......................... 10
Mute Button .................................. 10
Channel Change Features ..................... 10
Channel (Ch) Buttons ....................... 10
Keyboard "0 through 9" Buttons .............. 10
VCR Function Buttons ......................... 10
"l'Vfideo Button .............................. 11
Recall Button ................................. 11
R-Tune(Rapid Tune) Button ................... 11
Multi Button .................................. 11
Cable (TV) Power Button ...................... 12
PIP (Picture in Picture) Button .................. 12
PIP Channel Buttons .......................... 12
PIP Swap Button ....... :..................... 12
PIP Size Button ............................... 13
PIP Freeze Button ............................ 13
PIP Move Button............................... 13
PIP Search Button ............................ 13
Main Menu(Icons) ............................ 14
Picture Adjustments ........................... 15
Color ...................................... 15
Tint ....................................... 15
Brightness ................................. 15
Picture .................................... 15
Sharpness ................................. 15
Picture Norm ............................... 15
Game Guard ....... . ........ . ................ 16
Game Guard (Lockout) ...................... 16
Game Guard (Unlock) ....................... 17
Timer Features .......................... ..... 18
Sleep Timer ................................ 18
Program Timer ............................. 19
Set-Up Features ............................. 20
Menu ..................................... 20
CC (Closed Caption) On Mute ................. 21
Set Time (Clock) ............................ 22
Antenna Tuning Mode ....................... 23
Auto Programming ............. _............ 24
Manual Programming ................ ....... . 25
CC (Closed Caption) Mode .................. 26
Channel Caption (Station Identifier) ............. 27
Audio Adjustments ............................ 28
Bass, Treble & Balance Adjustments .......... 28
Audio Norm ................................ 28
Audio Mode Selection (Stereo/SAP/Mono) .... 29
[TV] Speaker... ............................ 29
Surround Sound ............................ 30
AI Sound .................................. 30
Input Select .................................. 31
Main (picture) Input Selection ................ 31
PIP Input Selection ......................... 31
Programming The Universal Remote Control .... 32
VCR, LDP & Cable Converter Box
Infra-Red Codes .......................... 33
Optional Equipment Connection & Operation ... 34
Stereo Connection (To Audio AMP) . ,.. ......... 34
Video/Audio Connection ....................... 34
S-Video Connection .......................... 35
Care & Cleaning ................. ............... 35
Power Loss ................................... 35
Troubleshooting Chart ........................ 36

\\ Installation
Receiver Location
Locate for comfortable viewing. Avoid placing where sunlightor other brightlight(including reflections)willfall on the
screen.
Use of some types of fluorescent lightingcan reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or
moisture.
To insure optimum color purity do not position magnetic equipment (motors, fan, other speakers, etc.) nearby.
Optional External Equipment Connections
The Video/Audio connections between components can be made with shielded videoand audio cables. For best perfor-
mance, video cables should utilize 75 ohm coaxial shielded wire. Cables are available from your dealer or electronic
supply house.
Before you purchase any cables, be sure you know what type of output and input connectors your various components
require. Also determine the length of cable you'll need.
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE THIS (POLARIZED) PLUG
WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. Polarized Plug
Remote Control Battery Installation & Replacement
Battery Installation
Batteries: Use two "AA" batteries.
1. Turn the Transmitter face down. To remove bottom cover, press down
on marking and slide cover off in the direction indicated.
2. Install the batteries as shown in the battery compartment. (Polarity (+)
or (-) must be correct.)
3. Replace the cover and slide in reverse untilthe lock snaps.
Precaution on Battery Use
Incorrect installation can cause battery leakage and corrosion that will
damage the Remote Control Transmitter.
Observe the Following Precautions:
1. Batteries must be replaced as a pair.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (Example: "Zinc Carbon" with "Alkaline").
4. Do not attempt tocharge, short-circuit, disassemble, heat or bum used
batteries.
5. Battery replacement is necessary when Remote Control reacts
sporadically or stops operating the Receiver.
II I I!1
®
€
®
®
€
®
Press Down Here And
Slide Cover Back
J
-5-

Antenna/Cable Connections
Antenna Connection - For proper reception of VHF/UHF channels an external
antenna is required. For best reception an outdoor antenna is recommended.
Antenna Mode must be set to TV. (Refer to Antenna Mode section.)
Incoming Cable From Home Antenna (75 Ohm)
VHF/UHF
on Back of Set
Indoor Outdoor
Typical VHF/UHF Antenna
Incoming Cable From Home Antenna (300 Ohm)
VI-IF/UHF
on Back of Set
@300 to 75 ohm Matching
Transformer (Not Included)
Cable Connection - For receptionofcable channels (01-125) connect thecable supplied byyourlocalCable company.
Antenna Mode must be set to CABLE. (Refer to Antenna Mode section.)
Incoming 75 Ohm Cable (From Cable Company)
VHFAIHF
on Back of Set
NOTE: Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A
Cable Converter box is required for proper reception. Check with your local Cable company for its compatibility
requirements.
Other Video Equipment
VCRs, Video Disc Players, Computers, TV games and Teletext equipment can also be connected to the antenna input
connection.
-6-

Picture in Picture (Two Tuner) Antenna and External Video Connection
ThisReceiver hasthe "PICTURE IN PICTU RE"feature that usestwotuners. This allowsyou to watch 2 live broadcastsat
thesame timewithout anexternalvideo source. (See Antenna Connection, Detail 1.) Ifyou wish anexternal videosource
(VCR, Laser Disc Player orCamcorder) may be monitored in the PIP Frame. (See ExternalVideo Connection, Detail2.)
Detail I - PIP Antenna Connection
TERMINALS ON BACK OF RECEIVER
Incoming Cable
From Antenna Or
Cable TV System
To ANT Terminal
®
ANT
•@S-VIDEO
® ® v,ooo
LI.- 1
r ® ® ®,°o,o
[-L.®® ®.,
LTO 2_1-- INPUT
AUDIO
AMP
Detail 2 - PIP Extemal Video Connection
VCR or VIDEO
DISC PLAYER
@
ANT
TERMINALS ON BACK OF RECEIVER
•@S-VIDEO
® ® v,ooo_
,® ®®,_ _
AUDIO
.® ® ®..
2_1B INPUT
O AUDIO
AMP
To ANT Terminal
TERMINALS ON BACK OF VCR
AUDIO OUT
ToVCR
Ant Input
Helpful Hints:
The PIP willoperate using Audio/Video input terminals I or 2.
Use the W/VIDEO button (when the PIP frame is displayed)
to select proper mode.
The PiP feature will operate usingS-Video input terminal 1.
AA
Signal Splitter
,oot,nc,uo ,
V
Incoming Cable
From Antenna Or
Cable "IV System

Location of Controls (Remote Control)
®POWER
OMULTI
CD ®
®
®
®
@
®
®
@
ACTION
__ T VNIDEO
CD
®®®
®®®
®®®
"_-CA_------_ I"VIAUYJCABLE
__j_®_ _
VCR CABLE
POWER RECORD POWER
FF 1
I-_-I!
MOVE SIZE PIP I
STOP PAUSE i
FREEZE SEARCH _"_W_ AP I
VCR LDPJ VCR CHANNEL-'_'_
L
®
®
@
@
,
@
@
®
®
®
J
8

Location of Controls (Receiver)
L
L
Front Control Panel
POWER <I VOLUME I_ VCHANNEL& ACTION TVMD_O Remote Control
Sensor
@
@
-@
@
@
@
@
@
@
Quick Reference Control Operation (Remote & Receiver)
Power Button Press toturn ON OFF.
or (pg.10)
- adjust to adjust Menus, Video Menus and select operating
Volume Buttons Pressto Sound Level. Press Audio
features when menus are displayed. (pg.10)
Channel Buttons - Press to select channels. Press to desired features
programmed highlight when menus are
displayed. Also usedto selectCable Converter boxchannels after programming Remote Control Infra-red codes
(the TV/AUX/CABLE switch mustbe set in CABLE position). (pg.lO)
QTWVideo Button-Press toselectTV oftwo Video for the Main Picture the PIP frame PIP
or one Inputs, or (when
frame is displayed). (pg.11)
Action Button Pressto Main Menu and exit On Screen feature
display access or and Adjustment Menus. (Pg.14)
Multi Button - to to six Remote Function buttons.
Programmable operate up (pg.11)
Mute Button Press to mute sound.A second returns sound.
press (pg.10)
R-Tune Button - Press to switch between two channels.
(Rapid Tune) (pg.11)
Recall Button - Press to Time, status of Video Channel
display Sleep Timer, Channel, Mode, Caption (Station
Identifier) and Audio Mode. (pg.11)
Keyboard "0 through 9" Buttons - Press desired channel number to access any channel. (pg.10)
VCR Function Buttons - Programmable to operate many brands of VCRs. (pg.10)
Cable Power Button - Programmable to operate selected CATV converter boxes. (pg.12)
PIP (Picture In Picture) Button - Press to display the PIP frame, press again to remove PIP frame. (pg.12)
Swap Button - Pressto interchange PIP frame with Main Picture (when the PIP frame is displayed). (pg.12)
size Button - Press to select size of PIP frame (when the PIP irame isdisplayed). (pg.13)
Move Button- PresstopositionPIP frameto anycomer ofthe Main Picture(when PIP frame isdisplayed). (pg.t 3)
Freeze Button - Pressto stopaction inthe Main Pictureor PIP frame (when the PIP frame isdisplayed). (pg.13)
Search Button - Pressthe SEARCH buttonto automatically scanchannels which are programmed intomemory.
Press the SEARCH buttonagain to delete Search frame. (pg.13)
- isdisplayed, press the PIP Channel (CH) UP button toselect the next
PIP Channel Buttons When the PIP frame
higher programmed channel in the PIP frame. Press the Channel (CH) DOWN button toselect the next lower pro-
grammed channel inthe PIP frame. (pg.12)
TV/AUX/CABLE Switch -This switchis usedto selectthe proper mode when programming Remote Control Infra
red codes or operating theTV or external equipment (VCR, LDP or Cable TV Converter box).
VCR/LDP Switch - This switchisused toselect the proper mode when the TV/AUX/CABLE switch is inthe AUX
position to program the Remote Control Infra red codes or operate the auxiliary equipment (VCR, LDP).
-9-

Control Operation
Power Button - Pressthe POWER button to tum
ON. Press again to turn OFF.
POWER
Channel Change- (Twooptions)
Option 1.
Press the CHANNEL (CH) UP or DOWN buttonto
sequentially scan through programmed channels
(when On Screen Menus are not displayed).
NOTE: TV/AUX/CABLE switch (located on Remote)
must be set in TV position. "FVlAUX/CABLE
Located On Remote Control
Volume Button - Press the VOLUME (VOL)
LEFT or RIGHT button for desired listening level (when
On Screen Menus are not displayed).
Located On Remote Control
Decreases
Volume Level
Increases
Volume Level
Mute Button - Press the MUTE button to quickly
reducesound level (Mute will appear on screen). Press
againto restoresound.
MUTE
Helpful Hints:
•Helpful informationwill display On Screen momen-
tarilywhen Receiver is firstturned on and when the
channel ischanged.
• When usingkeyboard entry for channels 10,11 and
12 in the CABLE mode there is a slightdelay before
channel change because of the capability oftuning
cable channels 100 to 125.
•Ifyou do not receive channels above 13, confirmthe
typeofsignal at ANT Input (TV or Cable) and setthe
TV or Cable Tuning Mode accordingly.(Refer to Set
Up Feature, Antenna selection.)
NOTE: If =SPEAKER OFF" is displayed On Screen
after pressing the VOLUME button, refer to
Audio Menu to turn Speakers =ON".
_Selects Next
___ Higher Channel
Selects Next / _=€=====T=======__
Lower Channel
Option 2.
Press two digits on keyboard (Example press 0,
then 5 for channel 05). For channels over 99, press
three digits on keyboard.
1
I@ @ ®1
I1® ®1
I(D ® ®1I
L
VCR Function Buttons - TheVCRFUNC-
TIONbuttons have been designed tooperate numerous
brands of VCRs. The infra-red code must be obtained
priorto use. (Please refer to Programmingthe Universal
Remote for programming instructions.)
NOTE: The "I'V/AUX/CABLE switch (located on Re-
mote) mustbe inthe AUX position(Center). The
VCR-LDP switch must be in the VCR position.
TV/AUX/CABLE
r-_
VCR 1
POWER RECORD I
REW PLAY FF
_-lr-_ F-_
MOVE SIZE PIP
TVNCR STOP PAUSE
_E_E SW_
VCR/LDP VCR CHANNEL ,
-10-

TV/Video Button - Pressthe TVNIDEO button
to select desired input for Main Picture or PIP frame
(when PIP frame is displayed).
TVNIDEO
-Signal connected to: MainPicture
REAR VIDEO/AUDIO INPUT 2 JACKS /
REAR VIDEO/AUDIO _
INPUT 1 JACKS
TV or CABLE
VIDEO 2 I
::o li
Signal connected to:
REAR VIDEO/AUDIO INPUT 2 JACKS-"-'D 1 PiPVlDEO 21
REAR VIDEO/AUDIO -I I I
INPUT 1JACKS _PIP VIDEO 1 _II
TV or CABLE _ PIP CHr_02_.J
I_=--- PIP Frame
Recall Button - Press the RECALL button to
review:
• Audio Mode status
•CH number or Video Input selected
•Sleep Timer status
•Clock time
•Channel Caption (Station Identifier)
RECALL SAP CH 03
MONO XYYZ
29 1:00
R-Tune (Rapid Tune) Button - Pressthe
R-TUNE (RAPID TUNE) button to instantly switch
between the last twochannels selected (without anyOn
Screen display being activated).
R-TUNE
c;2
CHANNEL NOW _CHANNEL TUNED
BEING VIEWED IMMEDIATELY BEFORE
)
PressButton
Press Button Again
<V.x
-11 -
Multi Button -- The MULTI button can be
programmed to operate up to 6 Remote function
buttons at the same time. For Example: TV
Power/On, VCR Power/On (selected brands) can be
operated at the same time with one press of the MULTI
button.
Procedure
1. First program the Remote for the selected VCR
Infra-red access code. Confirm that the Remote
Control iscompatible with the equipment.
2. Face the Remote Control transmitter away from all
equipment remote sensors.
3. Press and hold Remote TV Power button, then
press and hold the MULTI button down simulta-
neously.(All previous commands are erased.)
(TV) POWER MULTI
PRESS SIMULTANEOUSLY
4. Press a maximum of 6 Function buttons on the
Remote.
Each buttonyou press isequal to one function. Ifsix
Remote buttonfunctionsare entered, all willregister
in the MULTI button memory in the sequence
entered. When less than six Remote button
functions are entered, press the MULTI button to
end the program mode. (Waiting more than 30
seconds without pressing another button will also
end the program mode.)
The following is an example of Remote functions
that can be programmed into the MULTI button.
- TV Power- For turning "IV ON and OFF.
- VCR Power - For turning VCR ON and OFF
(selected brands after programming it's Infra-red
access code, ifnecessary).
Bothcan be turned ON or OFF with one press ofthe
MULTI button.
NOTE: To activate VCR Power or Cable box Power
or other VCR/Cable box functions, the
TV/VCR/CABLE switch must be put intothe proper
mode during Multi button program.
(TV) POWER VCR POWER MULTI
NOTE:
To delete entered functions - Press the Remote
TV POWER and MULTI buttons simultaneously.
Now you can enter from one to sixdifferent Remote
functions. (-rv)POWER MULTI
PRESS SIMULTANEOUSLY
You can also program the MULTI button to perform
most individual Remote Control button functions.
Buttons which continuously perform a function as
long as pressed (Volume Up/Down, Channel
Up/Down, etc.) cannot be programmed. Only those
buttons which perform a function when initially
pressed (Power On/Off, Mute, Direct Channel Entry,
etc.) can be programmed.

Cable Power Button - The CABLE Power
button on the Remote Control has been designed to
operate selected brands of Cable ConverterBoxes. The
proper Cable Converter Box infra-red code must be
obtained priorto use. (Please refer to Programming the
Universal Remote for programming instructions.)The
TV/AUX/CABLE switch should be in the cable position.
NOTE: Use the Channel UP and DOWN buttonson the
Remote for selecting Cable Converter Box
Channels. CASLE
POWER
Located On Remote Control I-JIh-"l
Use to select Cable Box
Channels afterprogramming
Infra-red Code.
PIP (Picture in Picture) Button--This
feature allows the viewer to monitor one channel
program whilewatching another. The monitoredsource
(PIP) can be a different channel or a different video
source (such as a VCR) when connected to the input
jacks.
•The TV/AUX/CABLE Switch should be in the TV
position (LEFT) before operating PIP buttons.
•S-Video connectionwill also operate thePIP feature
(refer to OPTIONAL S-VIDEO VHS CONNECTION
section).
• When the Main Picture is in Video mode with no
signal, the PIP will not operate properly.
PIP Operation
1. Press the PIP button.The PIP frame willappear at
the position itwas last displayed. The Main Picture
channel and PIP channel will display momentarily.
Audio willbe that of Main Picture.
2. To select CHs forthe Main Picture, usethe Remote
Control Keyboard or Channel UP/DOWN buttons.
To select CHs for the PIP frame use the Remote
Control PIP Channel UP/DOWN buttons.
3. Press the PIP button again to cancel PICTURE IN
PICTURE feature.
NOTE: For PIP Video source connection, refer to PIP
Antenna and External Video connection section.
PIP Channel Buttons - Pressthe(PIP)CH
(CHANNEL) UP or DOWN buttonwhile the PIP frame is
displayed to sequentially scan through Channels.
Scan Channel DOWN Scan Channel Up
(nextlower) (nexthigher)
PIP Swap Button - Press the SWAP button
(when the PIP frame isdisplayed) tointerchange what is
being viewed on the Main Picture with that of the PIP
frame.
CH 02
PIP VIDEO 1
VIDEO 1
PIP CH 02
• Audio will be that of the Main Picture.
Main
Picture
with
Sound
CH 2
PIP CH 5
Main Picture
Channel
11--
IF----
Picture in
Picture
Channel
Picture in
Picture
Frame
-12-

PIP Size Button -Press the SIZE button (when
the PIP frame isdisplayed) to chooseeither the large or
small PIP frame.
Large PIP Frame Small PIP Frame
PIP Freeze Button - Pressthe FREEZE button
to stop actionin the Main Picture or PIP frame.
PIP Move Button - The PIP frame may be
located at any comer ofthe Main Pictureby pressingthe
PIP MOVE button (when the PIP frame is displayed).
NOTE: Each time MOVE button is pressed (when the
PIP frame isdisplayed), the PIP frame will move
(counterclockwise) as illustrated.
I--I- I-1
Main
BPicture
. _ FreezeFrame
NOTE:
• Pressing the FREEZE button when the PIP frame is
not displayedwill stop action inthe Main Picture and
display it on the PIP frame.
• Pressing the FREEZE button when PIP frame is
displayed willstop action in the PIP frame, pl'essthe
FREEZE button again to continueaction.
•Press the PIP button to delete PIP frame.
PIP Search Button - TheSEARCHbuttonal-
lowsyou to scan channels in "Channel Scan memory"
one atatime. This feature willwork withor without anex-
ternal video signal as the Main Picture.
PIP CH 2
BPressSeamh
toScan
Search Operation
1. Press the SEARCH button. A PIP frame willappear
on the Main Picture. (The PIP frame willcontinuous-
ly scan channels in sequence as programmed into
channel memory.)
2. Two Options:
Option 1.
Press the SEARCH button again, the Search frame
will disappear.
Option 2.
Press the PIP button to stop Search feature on de-
siredpicture for PIP frame. (Press the SWAP button
tointerchange what isbeingviewed on the Main Pic-
ture with that of the PIP frame.
-13-

Main Menu (Icons)
-_l EX,TII 'NPUT ir_
[_ i p,cruRElI AUDIOI[_
"1 I GAME I ICHANNELI
IGUARDI ICAPT'ONI_
I_ I T,MERI ISET-UPII_
ACTION
Displays and Exits Menus
Located On Remote Control
Selects or Adjusts
Features When
Menu is Displayed
Selects Desired
Menu is Displayed
1. Press the ACTION button to display the Main Menu with Icons.
2. Pressthe CH UP or DOWN and the VOL LEFT or RIGHT buttonsto selectthe desired Iconwhenthe Main Menu
isdisplayed (selected Icon will be indicated in Red).
3. Press the VOL buttons for left and right movement and the CH buttons for up or down movement.
4. To exit the Main Menu first select the EXIT Icon, then press the ACTION button.
-14-

Picture Adjustments
•Color
•"13nt
•Brightness
• Picture
•Sharpness
•Picture Norm
ACTION
Displays and Exits Menus
Located On Remote Control
Selects Desired
Menu is Displayed
Selects or Adjusts
Features When
Menu is Displayed
Helpful Hints:
Picture Adjustments:
COLOR - adjust for desired color intensity.
TINT - adjust for natural flesh tones.
BRIGHTNESS - adjust so dark areas of picture just
become black for acrisp detail.
PICTURE - adjust so the white areas of the picture are
to your liking.
SHARPNESS - adjust for best clarity of outline detail.
Color, Tint, Brightness, Picture &
Sharpness Adjustments
1. Pressthe ACTION buttonto display the Main Menu.
2. Press the CH DOWN button to select the Picture
Icon.
3. Press the ACTION button to display the Picture
Adjustment Menu.
lPICTUREI
PICTURE NORM
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NO I,;,_,,.,,.,,.,,.,:--:. _.:
IIIIIIIIIIIII ........ I
IIIIIIIIIIIIIIIIIIIIIIIIII I
IIIIIIIIIIIII I
4. Press the CH UP or DOWN button to select the
desired Picture Adjustment (Color, Tint, Brightness,
Picture or Sharpness).
5. Press the VOL LEFT or RIGHT buttonto adjustyour
selection. (The selected Picture Adjustment will be
displayed).
6. Repeat steps 4 and 5 for the remaining Picture
Adjustments.
7. Press the ACTION button twice to exit the Picture
Adjustment Menu.
Picture Norm - This feature is used to reset
Color, Tint, Brightness, Picture and Sharpness
adjustments back to a factory preset level.
1. Pressthe ACTION button todisplay the Main Menu.
2. Press the CH DOWN button to select the Picture
Icon.
3. Press the ACTION button to display the Picture
Adjustment Menu.
'_-II PICTUREI
PICTURE NORM NO
COLOR IIIIlitltlltt .......
TINT
BRIGHTNESS IIIIIIIIIIIII
PICTURE IIIIIIIIIIIIIIIIIIIIIIIIII
SHARPNESS illllllllllll
-15-
4. Press the CH UP or DOWN button to highlight
"PICTURE NORM" (if necessary).
5. Press the VOL LEFT or RIGHT button to select
"SET" to Normalize Color, Tint, Brightness, Picture
and Sharpness.
6. Press the ACTION button twice to exit the Picture
Adjustment Menu.

Game Guard
ACTION
Displays and Exits Menus
Game Guard (Lockout) - Prevents video
games and other video sources from being viewed.
Channel 3, 4 and all video inputs are locked out for 12,
24 or 48 hours.
NOTE: Be sure to understand this feature before
attempting its use. Use a code that you will
easily remember.
1. Pressthe ACTION buttonto displaythe MainMenu.
2. Press the CH DOWN button to select the Game
Guard Icon.
3. Press the ACTION button to display the Game
Guard Menu.
Located On Remote Control
SelectsDesired
When
MenuisDisplayed
1GAMEGUARDI
LOCK CH 3, 4, AND VIDEO INPUTS
HOW LONG? 12 HOURS
ENTER CODE - --
SET NO
Selects or Adjusts
Featur=s When
Menu is Displayed 4. Press the VOL RIGHT button to select the desired
hours (12, 24 or48) for Game Guard (Lockout)to be
activated.
5. Press the CH DOWN button to select "ENTER
CODE". Then enter a 3 digit code with the Remote
Control Keyboard.
IMPORTANT NOTE: Use a code you can easily
remember.
6. Pressthe VOL LEFT or RIGHT buttonafterentering
three digitcode. =Game Guard Locked"willdisplay
On Screen.
GAME GUARD
LOCKED
Game Guard Activated
-16-

Game Guard (Unlock)
To unlock the Game Guard feature, repeat steps 1
through 3. Enter the same 3 digitcode previously used
in step 5 with Remote Control Keyboard.
LOCK ACTIVATED
ENTER CODE TO CHANGE SE'I-FINGS
Enter Same 3 Digit Code Previously Used
GAME GUARD
UNLOCKED
If 3 Digit Code Is The Same
INVALID CODE
ENTERED
If 3 Digit Code Is Not The Same
-17-

Timer Features
•Sleep Timer
•Program Timer
ACTION
Displays and Exits Menus
Located On Remote Control
Selects or Adjusts
Features When
Menu is Displayed
SelectsDesired
Menu isDisplayed
Sleep Timer- Thisfeature isused forautomatic
tum off in 30, 60 or 90 minutes.
NOTE: Display willflash 3, 2 and I to indicatethe last
three remaining minutes pdor to turn off. The
Recall display willalso appear.
1. Press the ACTION button to display the Main
Menu.
2. Press the CH DOWN button to select the Timer
Icon.
3. Press the ACTION button to display the Timer
Control Menu.
--_1 TIMER CONTROL I
SLEEP TIMER NO
PROGRAM TIMER
ON
OFF
CHANNEL 3
SET NO
4. Press theVOL RIGHT buttonto select30, 60 or90
minutes (Sleep Timer willbe activated).
5. Press the ACTION button twice to exitthe Timer
Control Menu.
NOTE: To deactivate Sleep Timer repeat steps 1
through 4. In step 4 select =NO" instead of
minutes.
Helpful Hints:
Press the RECALL button to display the remaining
minutes for Sleep Timer, the time will display in the
bottom leftcomer.
-18-

Program Timer
ACTION
Displays and Exits Menus
Program Timer - This feature is capable of
turning theTV on,tuned to a desired channel and offat a
predetermined time (one day or everyday).
NOTE: The clock must be setfor this feature to operate.
(Refer to the Set-Up Menu to set time.)
1. Pressthe ACTION buttontodisplay the Main Menu.
2. Pressthe CH DOWN button to selectthe Timer Icon.
3. Press the ACTION button to display the Timer
Control Menu.
Located On Remote Control
Selects Desired
Menu is Displayed
--_ ITIMER CONTROL I
SLEEP TIMER NO
PROGRAM TIMER
ON
OFF --. : --
CHANNEL 3
SET NO
SelectsorAdjusts
FeaturesWhen
MenuisDisplayed
4. Press the CH DOWN button to select "ON" (time).
5. Pressthe VOL LEFT or RIGHT button repeatedly to
set hours (set AM/PM accordingly).
6, Press the CH DOWN button to select the minutes
position.
7. Pressthe VOL LEFT or RIGHT button repeatedly to
set minutes.
8. Pressthe CH DOWN button to select "OFF" (time).
9. Repeat steps 5 through 7 for setting "OFF" (time).
10. Press the CH DOWN button to select =CHANNEL".
11. Press the VOL LEFT or RIGHT button or use the
Remote Control Keyboard to enter the channel
number desired when the set tums =ON".
12. Press the CH DOWN button to select =SET".
13. Press the VOL RIGHT button to select:
•NO - not activated.
•ONE DAY - activated.
•EVERY DAY - activated.
NOTE: To deactivate Program Timer select =NO" in step
13,
14. Press the ACTION button twice to exit the Timer
Control Menu.
Helpful Hints:
•Ifyou see "GAME GUARD" in the upper right hand
corner, the channel or Video Input you haveselected
ha.s been locked out.
•Ifthe Program Timer "ON" functions while the set is
operating, the set willautomatically tune tothechan-
nel designated in the Timer Program.
-19-

Set-Up Features
• Menu
•CC (Closed Caption) on Mute
•Set Time
•Antenna (TV or Cable)
•Auto Program
•Manual Program
•CC (Closed Caption) Mode
Menu - The Main Menu can be displayed in two
formats. Icon with Text or Icon without Text for those
familiar with the Icon system.
1. Press the ACTION button todisplay the Main Menu.
2. Press the CH DOWN and VOL RIGHT buttons to
select the Set-Up Icon.
3. Press the ACTION button to display the Set-Up
Menu.
ACTION
Displays and Exits Menus
Located On Remote Control
MENU ICON+TEXT
__1. O N MUTE NO
TIME : AM
ANTENNA CABLE
AUTO PROGRAM NO
MANUAL PROGRAM NO
[] MODE OFF FIELD 1
Selects Desired
Menu is Displayed
4. Press the VOL LEFT or RIGHT button to select
ICON with TEXT or ICON only.
5. Press the ACTION button twice to exit the Set-Up
Menu.
Selects or Adjusts
Features When
Menu is Displayed
===_ _--]1 EX,TI
_-] i PICTUREI
Iov ol
_---11 TIMERI
I INPUTi rer_
i AUDIOI_
IC.A.,,E.I
CAPTIONI
ISE'r-uPI_
Icon with Text
@
Icon (Only)
- 20 -