Panasonic GP-VD150 User manual

Before operating this product, please read the instructions carefully and save this manual for future use.
Operating Instructions <Basics>
HD Communication Camera
Model No. GP‑VD150
Installation Instructions provided
For instructions on how to operate this HD Communication Camera and
how to establish its settings, refer to the “Operations and Settings” manual
(PDF file).
Download the “Operations and Settings” manual from the home page
given below.
http://panasonic.net/psn/products/hdvc/resource/users_guides.html
GP-VD150基本編_英(PGQX1231ZA).indd 1 2012/07/20 13:50:21

2
This class A digital apparatus complies with
Canadian ICES-003.
For CANADA
WARNING:
 THIS APPARATUS MUST BE EARTHED
To ensure safe operation, the three‑pin plug must
be inserted only into a standard three‑pin power
point which is effectively earthed through the normal
household wiring.
Extension cords used with the apparatus must
have three cores and be correctly wired to provide
connection to the earth. Wrongly wired extension
cords are a major cause of fatalities.
The fact that the apparatus operates satisfactorily
does not imply that the power point is earthed or that
the installation is completely safe. For your safety, if
you are in any doubt about the effective earthing of
the power point, please consult a qualified electrician.
indicates safety information.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (service) instructions in the
literature accompanying the appliance.
WARNING:
• TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.
• THE APPARATUS SHALL NOT BE EXPOSED TO
DRIPPING OR SPLASHING AND THAT NO
OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, SHALL BE PLACED ON THE
APPARATUS.
WARNING:
TO PREVENT INJURY, THIS APPARATUS MUST
BE SECURELY ATTACHED TO THE FLOOR
IN ACCORDANCE WITH THE INSTALLATION
INSTRUCTIONS.
CAUTION:
TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD AND ANNOYING INTERFERENCE, USE
THE RECOMMENDED ACCESSORIES ONLY.
FCC Note:
This equipment has been tested and found to comply
with the limits for a class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy, and if
not installed and used in accordance with the
instruction manual, may cause harmful interference
to radio communications. Operation of this equipment
in a residential area is likely to cause harmful
interference in which case the user will be required to
correct the interference at his own expense.
Warning:
To assure continued FCC emission limit compliance,
the user must use only shielded interface cables when
connecting to external units. Also, any unauthorized
changes or modifications to this equipment could void
the user’s authority to operate it.
CAUTION:
In order to maintain adequate ventilation, do not
install or place this unit in a bookcase, built-in
cabinet or any other confined space. To prevent
risk of electric shock or fire hazard due to
overheating, ensure that curtains and any other
materials do not obstruct the ventilation.
The socket outlet shall be installed near the
equipment and easily accessible or the mains plug or
an appliance coupler shall remain readily operable.
A warning that an apparatus with CLASS 1
construction shall be connected to a MAINS socket
outlet with a protective earthing connection.
Safety precautions
ENGLISH VERSION
GP-VD150基本編_英(PGQX1231ZA).indd 2 2012/07/12 14:46:51

3
indicates safety information.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized
or grounding‑type plug. A polarized plug has two
blades with one wider than the other. A grounding‑
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord form being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11) Only use attachments/accessories specified by
the manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the
cart/apparatus combination to avoid
injury from tip‑over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power‑supply
cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the
applicable safety instructions listed below. Keep these operating instructions handy for future reference.
IMPORTANT SAFETY INSTRUCTIONS
Safety precautions
GP-VD150基本編_英(PGQX1231ZA).indd 3 2012/07/12 14:46:51

4
Cet appareil numérique de la classe A est
conforme à la norme NMB-003 du Canada.
Pour Canada
AVERTISSEMENT:
 Cet appareil doit être relié à la terre.
Pour assurer un fonctionnement en toute sécurité, la
fiche trois broches ne doit être insérée que dans une
prise trois broches standard qui est reliée à la terre
efficacement par le système électrique domestique
normal.
Des rallonges utilisées avec l’appareil doivent
comporter trois noyaux et être correctement
raccordées pour assurer la connexion à la terre.
Des rallonges mal reliées sont une cause majeure
d’accidents mortels.
Le fait que l’appareil fonctionne correctement ne
signifie pas que le branchement électrique est relié
à la terre ou que l’installation est complètement sûre.
Pour votre sécurité, en cas de doutes sur la mise
à la terre du branchement électrique, veuillez vous
adresser à un électricien qualifié.
Informations concernant la sécurité.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION: AFIN DE PRÉVENIR LE RISQUE DE
CHOCS ÉLECTRIQUES, NE PAS RETIRER LES VIS.
TOUTE RÉPARATION DEVRAIT ÊTRE CONFIÉE À UN
PERSONNEL QUALIFIÉ.
L'éclair à extrémité fléchée placé dans un triangle
équilatéral est destiné à attirer l'attention de l'utilisateur
sur la présence d'une "tension potentiellement
dangereuse" et non isolée se trouvant dans les limites
du coffret de l'appareil dont la puissance est suffisante
pour constituer un risque important d'électrocution.
Le point d'exclamation placé dans un triangle
équilatéral sert à attirer l'attention de l'utilisateur
sur des instructions de fonctionnement et
d'entretien (de dépannage) à caractère important
dans la brochure qui accompagne l'appareil.
AVERTISSEMENT:
• POUR RÉDUIRE LES RISQUES D’INCENDIE OU
D’ÉLECTROCUTION, NE PAS EXPOSER CET
APPAREIL À LA PLUIE OU À L’HUMIDITÉ.
• CET APPAREIL NE DOIT PAS ÊTRE EXPOSÉ À
DES SUINTEMENTS OU DES ÉCLABOUSSURES,
ET AUCUN OBJET REMPLI DE LIQUIDE, COMME
UN VASE, NE DOIT ÊTRE POSÉ DESSUS.
AVERTISSEMENT:
POUR ÉVITER TOUT RISQUE DE BLESSURES,
L’APPAREIL DOIT ÊTRE SOLIDEMENT FIXÉ
AU PLANCHER CONFORMÉMENT AUX
INSTRUCTIONS D’INSTALLATION.
ATTENTION:
POUR ÉVITER TOUT RISQUE D’INCENDIE, DE CHOCS
ÉLECTRIQUES OU D’INTERFÉRENCES, N’UTILISER
QUE LES ACCESSOIRES RECOMMANDÉS.
Remarque de la Commission Fédérale des
Communications des États-Unis:
Cet équipement a été testé et déclaré conforme aux
spécifications de la Classe A des appareils numériques, suivant
le chapitre Part 15 des Règles FCC. Ces limites sont prévues
pour assurer une protection suffisante contre les interférences
nuisibles dans une installation commerciale. Cet équipement
génère, utilise et peut émettre de l’énergie radiofréquence,
et, s’il est installé sans tenir compte des recommandations du
mode d’emploi, peut causer des interférences nuisibles dans les
communications radio. L’utilisation de cet équipement dans une
zone résidentielle risque fort de provoquer des interférences
nuisibles, auquel cas il sera demandé à l’utilisateur de remédier
à ces interférences à ses frais.
Avertissement:
Pour assurer une conformité continue aux limites
d’émission imposées par la FCC, l’utilisateur ne doit utiliser
que des câbles d’interface blindés pour la connexion avec
des appareils externes. Par ailleurs, tout changement
ou modification non autorisé de cet équipement pourrait
annuler la compétence de l’utilisateur à l’utiliser.
ATTENTION:
Pour maintenir une bonne ventilation, ne pas
installer ni placer l’appareil dans une étagère, un
meuble encastré ni aucun endroit confiné. Pour
éviter tout risque de choc électrique ou de feu
dû à une surchauffe, vérifier qu’aucun rideau
ni aucun autre matériau ne fait obstacle à la
ventilation.
La prise électrique doit être installée près de
l’équipement et facilement accessible, sinon la fiche
principale ou un coupleur doivent rester utilisables à
tout moment.
Un appareil avec une construction de CLASSE 1 doit
être raccordé à une prise secteur avec une connexion
à la terre sécurisée.
Consignes de sécurité
VERSION FRANÇAISE
(FRENCH VERSION)
GP-VD150基本編_英(PGQX1231ZA).indd 4 2012/07/12 14:46:51

5
Informations concernant la sécurité.
1) Veiller à lire ces instructions.
2) Conserver ces instructions.
3) Tenir compte de tous les avertissements.
4) Se conformer à toutes les instructions.
5) Ne pas utiliser cet appareil près de lieux en
présence d'eau.
6) Nettoyer uniquement avec un chiffon sec.
7) N'obturer aucune des ouvertures d'aération.
Installer conformément aux instructions du
fabricant.
8) Ne pas utiliser à proximité de sources de chaleur
telles que des radiateurs, des bouches de
chauffage, des appareils de chauffage ou tout
autre appareil (y compris les amplificateurs)
produisant de la chaleur.
9) Ne pas asservir l'objectif de sécurité de la prise
polarisée ou de la prise de mise à la terre. Une
prise polarisée possède deux lames dont l'une
est plus large que l'autre. Une prise de mise à la
terre possède deux lames ainsi qu'un troisième
élément, un ergot de mise à la terre. La lame qui
est large ou le troisième élément, l'ergot, sont
installés pour assurer votre sécurité. Si la prise
fournie ne s'engage pas correctement dans votre
prise, consulter un électricien pour qu'il effectue
le remplacement de l'ancienne prise de sortie
secteur.
10) Protéger le cordon d'alimentation afin que
personne ne puisse marcher dessus ni ne soit
pincé, notamment près des prises, les prises
pratiques et les points de sortie de l'appareil.
11) Utiliser uniquement les fixations ou les
accessoires spécifiés par le fabricant.
12) Utiliser uniquement le chariot, le
support, le trépied, la platine de
fixation ou la tablette spécifiée par
le fabricant ou vendu avec l'appareil.
Quand un chariot est utilisé, prendre
toutes les précautions nécessaires
lors du déplacement de la
combinaison chariot‑appareil afin que
le tout ne se renverse pas.
13) Débrancher cet appareil pendant les orages
électriques ou s'il n'est pas utilisé sur de longues
périodes de temps.
14) Toute réparation ou dépannage doit être confié
à un personnel qualifié. Un dépannage est
nécessaire lorsque l'appareil a été endommagé
d'une manière quelconque, par exemple, lorsque
le cordon d'alimentation électrique ou la prise ont
été endommagés, quand du liquide s'est répandu
dessus ou si des objets sont tombés dans
l'appareil, lorsque l'appareil a été exposé à la pluie
ou à l'humidité, ne fonctionne pas normalement
ou s'il a fait une chute.
Veiller à lire ces instructions attentivement avant d’utiliser l’appareil. Respecter les instructions de sécurité apposées
sur l’appareil et les instructions de sécurité applicables ci‑dessous. Conserver ces instructions à portée de main pour
pouvoir s’y référer ultérieurement.
Instructions de sécurité importantes
Consignes de sécurité
GP-VD150基本編_英(PGQX1231ZA).indd 5 2012/07/12 14:46:51

6
Este aparato digital de clase A satisface las
Regulaciones canadienses ICES-003.
Para Canadá
ADVERTENCIA:
 Este aparato deberá ser conectado a tierra
Para garantizar un funcionamiento seguro, la clavija de tres
contactos deberá introducirse solamente en una toma de
corriente para tres contactos estándar que se encuentre
conectada a tierra mediante el cableado normal de la casa.
Los cables prolongadores utilizados con el aparato
deberán tener tres conductores y estar cableados
correctamente para proporcionar la conexión a tierra
adecuada. Los cables prolongadores mal cableados
son una de las causas principales de que se produzcan
accidentes mortales.
El hecho de que el aparato funcione correctamente
no significa que éste esté conectado a tierra o que la
instalación sea completamente segura. Para su seguridad,
si usted tiene alguna duda de la conexión a tierra eficaz del
aparato, consulte a un electricista cualificado.
indica información de seguridad.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATENCIÓN: PARA REDUCIR EL RIESGO DE SACUDIDAS ELÉCTRICAS,
NO QUITE LA TAPA SUPERIOR (NI TRASERA). NO HAY NINGUNA PIEZA
SUSCEPTIBLE A MANTENIMIENTO POR EL USUARIO. SOLICITE LOS
SERVICIOS TÉCNICOS A PERSONAL CUALIFICADO.
EI símbolo del relámpago con cabeza de flecha, dentro
de un triángulo equilátero, tiene la función de llamar
la atención del usuario a la presencia de "tensión
peligrosa" no aislada dentro de la caja del producto
que puede ser de intensidad suficiente para constituir
un riesgo de sacudidas eléctricas a las personas.
EI símbolo del punto de exclamación dentro
de un triángulo equilátero tiene la función de
llamar la atención del usuario a la presencia de
importantes instrucciones de mantenimiento
(servicio) en la literatura que acompaña el equipo.
ADVERTENCIA:
• PARA REDUCIR EL RIESGO DE INCENDIO O
DESCARGA ELÉCTRICA NO EXPONGA ESTE
APARATO A LA LLUVIA NI A LA HUMEDAD.
• EL APARATO NO DEBERÁ EXPONERSE AL
GOTEO NI A LAS SALPICADURAS, Y NINGÚN
OBJETO CON LÍQUIDOS, COMO FLOREROS,
DEBERÁ PONERSE ENCIMA DEL APARATO.
ADVERTENCIA:
PARA EVITAR HERIDAS, ESTE APARATO
DEBE ESTAR FIRMEMENTE INSTALADO AL
PISO DE ACUERDO CON LAS INSTRUCCIONES
DE INSTALACIÓN.
PRECAUCIÓN:
PARA REDUCIR EL RIESGO DE INCENDIOS,
SACUDIDAS ELÉCTRICAS E INTERFERENCIAS
MOLESTAS, UTILICE SOLAMENTE LOS ACCESORIOS
RECOMENDADOS.
NOTA de FCC:
Este equipo ha sido probado y se ha comprobado que
cumple con los límites de un dispositivo digital de clase A,
según lo indicado en la Parte 15 de las Normas de FCC.
Estos límites se han establecido para ofrecer una protección
razonable contra interferencias perjudiciales cuando se
opera el equipo en entornos comerciales. Este equipo
genera, emplea, y puede radiar energía de radiofrecuencia
y, si no se instala y emplea de acuerdo con el manual de
instrucciones, puede causar interferencias perjudiciales en
las radiocomunicaciones. La operación de este equipo en
áreas residenciales puede causar con facilidad interferencias
perjudiciales en cuyo caso el usuario deberá solucionar el
problema de las interferencias por cuenta propia.
Advertencia:
Para asegurar el cumplimiento continuado con los
límites de emisión de la FCC, el usuario deberá usar
solamente cables de interfaz blindados cuando conecte
a unidades externas. Además, cualquier cambio o
modificación no autorizado hecho en este equipo puede
anular la autorización que tiene el usuario para utilizarlo.
PRECAUCIÓN:
Para mantener unas buenas condiciones de ventilación,
no instale ni ponga este aparato en una librería, mueble
empotrado u otro espacio reducido. Para evitar el riesgo
de que se produzcan sacudidas eléctricas o peligros
de incendio debidos al recalentamiento, asegúrese
de que las cortinas y otros materiales no obstruyan la
ventilación.
La toma de corriente deberá estar instalada cerca
del equipo, y a ella deberá tenerse un acceso sin
problemas, o la clavija de alimentación o un acoplador que
tenga el aparato deberán poder manejarse fácilmente.
En la toma de corriente con conexión a tierra de
protección deberá ponerse un aviso indicando que en
ella se pueden conectar aparatos CLASS 1.
Precauciones de seguridad
VERSIÓN ESPAÑOLA
(SPANISH VERSION)
GP-VD150基本編_英(PGQX1231ZA).indd 6 2012/07/12 14:46:51

7
indica información de seguridad.
1) Lea este manual de instrucciones.
2) Guarde este manual de instrucciones.
3) Observe todas las advertencias.
4) Siga todas las instrucciones.
5) No emplee este aparato cerca del agua.
6) Límpielo sólo con un paño seco.
7) No bloquee ninguna de las aberturas de
ventilación. Instálelo de acuerdo con las
instrucciones del fabricante.
8) No lo instale cerca de fuentes de calor como
puedan ser radiadores, calefactores, estufas u
otros aparatos (incluyendo amplificadores) que
produzcan calor.
9) No elimine el propósito de seguridad de la clavija
polarizada o del tipo de toma de tierra. Una clavija
polarizada tiene dos cuchillas, una más ancha
que la otra. Una clavija del tipo de toma de tierra
tiene dos cuchillas y un tercer saliente para toma
de tierra. La cuchilla ancha o el tercer saliente
se incorporan para su seguridad. Si la clavija
suministrada no se acopla a la toma de corriente,
solicite a un electricista que le reemplace la toma
de corriente anticuada.
10) Proteja el cable de alimentación para que no
pueda ser pisado ni pellizcado, especialmente
porla parte de las clavijas, por los enchufes de
extensión y por el punto por donde salen del
aparato.
11)
Utilice sólo los acopladores/accesorios especificados
por el fabricante.
12) Empléelo solo en el carrito,
soporte, trípode, ménsula o mesa
especificados por el fabricante, o
vendidos con el aparato. Cuando
se emplee un carrito, tenga cuidado
cuando mueva la combinación del
carrito con el aparato para evitar
heridas debidas a caídas del aparato.
13) Desenchufe el aparato durante tormentas
con rayos o cuando se proponga dejarlo sin
utilizardurante períodos prolongados de tiempo.
14) Solicite todo tipo de servicio a personal de
servicio cualificado. Será necesario realizar el
servicio técnico cuando se haya dañado de algún
modo el aparato, como cuando se haya dañado
el cable o la clavija de alimentación, se haya
derramado algún líquido o se hayan introducido
objetos en el interior del aparato, se haya
expuesto el aparato a la lluvia o a la humedad,
cuando no funcione con normalidad, o cuando se
haya caído al suelo.
Lea cuidadosamente estas instrucciones de funcionamiento antes de utilizar la unidad. Siga las instrucciones
de seguridad de la unidad y las instrucciones de seguridad aplicables enumeradas a continuación. Guarde estas
instrucciones de funcionamiento a mano para poder consultarlas en el futuro en caso de ser necesario.
Instrucciones importantes de seguridad
Precauciones de seguridad
GP-VD150基本編_英(PGQX1231ZA).indd 7 2012/07/12 14:46:51

8
Contents
Safety precautions ........................................................... 2
Before use ......................................................................... 9
Overview ........................................................................ 9
Concerning HD Visual Communications System ........... 9
Concerning the Operating Instructions .......................... 9
Concerning the wireless remote controller
(optional accessory) .............................................. 9
Trademarks and registered trademarks ......................... 9
About copyright and licence ........................................... 9
Disclaimer of warranty .................................................... 9
Characteristics ................................................................ 10
Accessories .................................................................... 11
Installation precautions ................................................. 12
Operating precautions ................................................... 14
Concerning the wireless remote controller
(optional accessory) .................................................. 16
Parts and their functions ............................................... 17
Camera unit ................................................................. 17
Wireless remote controller (optional accessory) .......... 19
Setting the remote control IDs ...................................... 21
How the model’s Operating Instructions manuals are configured
 The manual of this HD communication camera (hereafter, “the unit”) is divided into two manuals: one is the <Basics>
(this manual), and the other is the <Operations and Settings>.
Before installing the unit, be sure to read the <Basics> to ensure that the unit is installed correctly.
 This manual explains how to install the unit.
For details on how to operate the unit and select its settings, refer to the “Operating Instructions <Operations and
Settings>” (PDF file).
Download the “Operating Instructions <Operations and Settings>” from the home page given below.
http://panasonic.net/psn/products/hdvc/resource/users_guides.html
To read PDF files, you will need Adobe® Reader® which is available from Adobe Systems.
Installation ....................................................................... 22
When installing the unit on a desk ................................ 22
When mounting the unit on a tripod ............................. 23
Connections .................................................................... 24
Connections with an HD Visual Communications
System ................................................................ 24
Troubleshooting .............................................................. 25
Appearance ..................................................................... 28
Specifications ................................................................. 29
GP-VD150基本編_英(PGQX1231ZA).indd 8 2012/07/12 14:46:51

9
Before use
 Overview
 This unit is a full HD camera integrated with a pan‑tilt
head and featuring a 1/3‑type full HD MOS sensor and
digital signal processor (DSP).
 In addition to its optical 12 zoom lens, the unit comes
with a 10 digital zoom to achieve high‑quality shooting
that overflows with ambiance.
 This unit is designed to be used exclusively with
Panasonic HD visual communications system.
Compatible HD visual communication units:
KX‑VC300NA, KX‑VC300BX,
KX‑VC600NA, KX‑VC600BX
 Concerning HD Visual
Communications System
 For descriptions of the panning, tilting, zooming, preset
and other camera operations using an HD visual
communication unit, refer to the operating instructions of
the unit which is supported.
 Concerning the Operating
Instructions
 For the purposes of this manual, the two KX‑VC300NA
and KX‑VC300BX models are referred to as the
“KX‑VC300” and the two KX‑VC600NA and KX‑VC600BX
models are referred to as the “KX‑VC600”.
 Concerning the wireless
remote controller (optional
accessory)
 This unit can be operated remotely using a wireless
remote controller (model AW‑RM50G) available as an
optional accessory.
It cannot be operated directly using the wireless remote
controller of an HD visual communication unit.
To purchase a wireless remote controller, contact your
dealer.
 Trademarks and registered
trademarks
 HDMI, the HDMI Logo and High‑Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other
countries.
 Adobe, Acrobat Reader, and Reader are either
registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
 About copyright and licence
Distributing, copying, disassembling, reverse compiling,
reverse engineering, and also exporting in violation of export
laws of the software provided with this unit are expressly
prohibited.
 Disclaimer of warranty
IN NO EVENT SHALL Panasonic Corporation BE LIABLE
TO ANY PARTY OR ANY PERSON, EXCEPT FOR
REPLACEMENT OR REASONABLE MAINTENANCE OF
THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT
LIMITED TO BELOW:
1 ANY DAMAGE AND LOSS, INCLUDING WITHOUT
LIMITATION, DIRECT OR INDIRECT, SPECIAL,
CONSEQUENTIAL OR EXEMPLARY, ARISING OUT
OF OR RELATING TO THE PRODUCT;
2 PERSONAL INJURY OR ANY DAMAGE CAUSED BY
INAPPROPRIATE USE OR NEGLIGENT OPERATION
OF THE USER;
3 UNAUTHORIZED DISASSEMBLE, REPAIR OR
MODIFICATION OF THE PRODUCT BY THE USER;
4 INCONVENIENCE OR ANY LOSS ARISING WHEN
IMAGES ARE NOT DISPLAYED, DUE TO ANY
REASON OR CAUSE INCLUDING ANY FAILURE OR
PROBLEM OF THE PRODUCT;
5 ANY PROBLEM, CONSEQUENTIAL
INCONVENIENCE, OR LOSS OR DAMAGE,
ARISING OUT OF THE SYSTEM COMBINED BY
THE DEVICES OF THIRD PARTY;
6 LOSS OF REGISTERED DATA CAUSED BY ANY
FAILURE.
GP-VD150基本編_英(PGQX1231ZA).indd 9 2012/07/12 14:46:51

10
Characteristics
1/3-type MOS sensor and high-performance 12 zoom
lens featured
 A 1/3‑type full HD MOS sensor and DSP (digital signal
processor) are incorporated.
High‑quality pictures are obtained by video processing in
many different kinds of ways.
 In addition to its optical 12 zoom lens, the unit comes
with a 10 digital zoom to achieve high‑quality images
that overflow with ambiance.
 A dynamic range stretch (DRS) function that
compensates for overexposure and loss of dark detail
and a new hybrid digital noise reduction (Hybrid DNR)
function for minimizing image lag even in dark locations
and shooting scenes clearly are incorporated to
reproduce clean and clear images in a wide range of
applications.
Easy operation of unit enabled by its integration with a
high-performance pan-tilt head unit
 Operations at the high speed of 90°/s
 Wide rotational angles with a panning range of ±100° and
a tilting range of ±30°
 Quiet operation with noise levels of NC35 (normal speed)
and NC40 (when preset)
Use of easy-to-operate wireless remote controller
(optional accessory) is possible
 A wireless remote controller capable of operating up to
four units can be used.
It can easily be used to set the various functions or switch
between them while viewing the menu screens.
GP-VD150基本編_英(PGQX1231ZA).indd 10 2012/07/12 14:46:51

11
Accessories
Check that the following accessories are present and
accounted for.
Operating Instructions <Basics> (this manual) ................... 1
Warranty ............................................................................. 1
Power cable (2 m {6.6 feet}) ............................................... 1
AC adapter ......................................................................... 1
GP-VD150基本編_英(PGQX1231ZA).indd 11 2012/07/12 14:46:51

12
Installation precautions
In addition to heeding the points presented in the “Safety precautions”, observe the following precautions
as well.
Ensure that the installation work complies with the
technical standards governing electrical equipment.
This unit is for indoor use only.
It cannot be used outdoors.
Avoid installation in a location where the unit will be exposed
to direct sunlight for extended periods or near a cooling or
heating appliance.
Otherwise, deformation, discoloration, malfunctioning and/or
problems in operation may result. Operate the unit where it
will not be splashed or sprayed by water.
Use this unit on a flat and level surface.
Do not install the unit on the surface of a wall, on a ceiling or
in a location where the unit will end up being inclined at an
angle.
 Do not hold the camera head while undertaking the
installation work. Doing so may cause malfunctioning.
OK NG
Note
Concerning the installation location
Install the unit in a stable location which will not be
susceptible to shaking. If the unit is installed in a location
which is susceptible to shaking, this will cause the unit’s
images to shake in turn.
Install the unit after conferring in detail with your dealer.
Do not install or use the unit in the following kinds of
locations.
 On the surface of a wall (where the unit will be installed
sideways and/or where the unit will be secured to the wall
using a mounting bracket)
 On a ceiling (where the unit would be installed so that it is
pointing downward)
 In locations (including places such as under the eaves of
a building) where the unit would be directly exposed to
rain or water
 In locations such as kitchens where there are high
concentrations of steam and grease
 In outdoor locations or hot places where the temperature
will exceed 40 °C {104 °F}
 In cold locations where the temperature will drop below
0 °C {32 °F}
 In locations where the humidity will exceed 85 %
 In locations where chemicals are used such as near
swimming pools
 At sea, in coastal areas or in locations where corrosive
gases are emitted
 In locations where radiation, X‑rays, or strong radio
waves or magnetic fields are generated
 In locations where the unit would be subject to a great
deal of vibration such as on board a vehicle or ship (this
unit is not designed to be used in vehicles)
 In locations where the temperature is subject to sudden
changes such as near the air outlet of an air conditioner
or near a door which allows the outside air to come in
What to avoid to ensure that the unit will perform stably
over a prolonged period
 Using the unit for a prolonged period in a location with
high temperature and humidity levels will cause its parts
to deteriorate and shorten its service life.
 Ensure that a cooling unit or heating unit will not blow any
air directly toward the installation location.
When the unit is no longer going to be used, do not
leave it lying around, but be absolutely sure to dispose
of it properly.
When installing, transferring or disposing of the unit, be
absolutely sure to hold it by its pedestal area.
Problems may result if the camera head is held or rotated.
Do not attach a filter, hood, extender or other parts to
the unit.
GP-VD150基本編_英(PGQX1231ZA).indd 12 2012/07/12 14:46:52

13
Installation precautions
Use the dedicated AC adapter and power cable provided
with the unit.
Connect the AC adapter and power cable to the power inlet
securely.
The power cable supplied with this unit must always be used
with this unit. The unit cannot be used with a power cable
which is not supplied with the unit. Neither can the power
cable supplied with the unit be used with any other device.
Installing the AC adapter
 Do not place the AC adapter in direct contact with a floor
or any other such surface. An extreme danger is posed
by water pooling on the surface as a result of leaking
rainwater or some other reason.
Anchor the AC adapter securely to a surface on which no
water, dust, etc. will collect.
 Secure the adapter firmly so that there will be no chance
that it will fall off or fall down.
Secure it using a strength which can withstand the mass
(approx. 320 g {0.71 lbs.}) of the AC adapter.
Install the accessory AC adapter near the main power
outlet, and position it in such a way that its power plug
can be plugged into and unplugged from the outlet easily.
If the AC adapter is to be connected where dust collects,
remove the dust and dirt from the power plug at regular
intervals as a measure to prevent tracking.
Power switch
This unit does not have a power switch. The power turns
on when its power plug is connected to a power outlet.
When the power is turned on, the pan, tilt, zoom and
focusing operations are performed. Before proceeding with
maintenance, be absolutely sure to disconnect the power
plug from the power outlet.
Connecting the power cable
Be absolutely sure to connect the power cable of the
AC adapter through a circuit breaker using one of the
following methods.
(1) Connect the power cable through a power control unit.
(2) Connect the power cable to a circuit breaker in a
power distribution panel with a contact distance of
3.0 mm or more.
Use a circuit breaker which is capable of shutting
off all the poles of the main power supply with the
exception of the protective ground conductor.
(3) Install the AC adapter near the power outlet, and
connect it through the power plug.
Grounding
Before using the unit, check that the grounding wire has
been fastened securely.
Check the grounding resistance (less than 100 ) of the
grounding terminal.
When the power plug is to be converted into a 2‑pin plug
for use, first consult with your dealer. Then use a plug
adapter which is equipped with a grounding terminal, and be
absolutely sure to connect this terminal to ground.
In a case like this, be absolutely sure to make the
connection to ground before proceeding to connect the
power plug to the main power source.
Similarly, before the ground connection is
to be disconnected, be absolutely sure to
disconnect the power plug from the main
power source first.
If there is a possibility of noise interference
Either wire the cables so that the power cable (ceiling light
cord) of AC 100 V or more, and the signal cable are placed
at least 1 m {3.3 feet} apart. Alternatively run each cable
through its own metal conduit. (The metal conduits must be
grounded.)
Radio signal interference
If the unit is positioned near a TV or radio transmitting
antenna or a strong electrical field or magnetic field (such as
that generated by a motor, transformer or power lines), its
images may be distorted and/or the images may be affected
by noise.
When connecting the cables, ensure that the connector
areas will not be subject to any load.
Doing so may cause malfunctioning.
Allowing the generated heat to escape
This unit allows the heat generated inside to escape from its
surfaces.
Do not install the unit in a location where it will be
surrounded by walls or other surfaces and where heat will
be trapped. In addition, the heat is dissipated to the bottom
panel which will warm up over time: This is normal and not
indicative of any trouble.
IMPORTANT
 The product name and its electrical ratings are
marked on its bottom panel.
GP-VD150基本編_英(PGQX1231ZA).indd 13 2012/07/12 14:46:52

14
Operating precautions
Shoot under the proper lighting conditions.
To produce pictures with eye‑pleasing colors, shoot under
the proper lighting conditions.
The pictures may not appear with their proper colors when
shooting under fluorescent lights.
Select the proper lighting as required.
To ensure a stable performance in the long term
Using the unit for prolonged periods in locations where the
temperature and humidity levels are high will cause its parts
to deteriorate, resulting in a reduction of its service life.
(Recommended temperature: Max. 35 °C {95 °F})
Ensure that a cooling unit or heating unit will not blow any
air directly toward the installation location.
Image persistence on the MOS sensor color filters
If parts of the MOS sensor are exposed continuously to
spotlights or other bright lights, the color filters inside the
MOS sensor will deteriorate, and the parts concerned may
become discolored. The discoloration may be noticeable
when the direction of fixed monitoring is changed.
Do not point the camera at strong
lights.
When parts of the MOS sensor are
exposed to spotlights or other strong
lights, blooming (a phenomenon where
the edges of strong lights become
blurred) may occur.
Bright subject
Blooming
Concerning the color reproduction of MOS sensors
Depending on the color tones of the subjects, the color
reproduction may deteriorate: This is normal and not
indicative of any trouble.
What happens with high-brightness subjects
Flare may occur if an extremely bright light source is pointed
at the lens. In a case like this, change the angle or take
some other remedial action.
When using the automatic functions
 If “FullAuto” has been selected as the setting for Scene
on the camera menu, for example, all the auto settings
will be turned on, and manual operations will no longer be
possible for some of the items.
 When using the ATW (auto tracking white adjustment)
function under fluorescent lights, the white balance may
vary.
 In some situations, it may be hard to focus at the auto
setting. In cases like this, select the manual setting, and
focus manually.
 The appropriate brightness may not be obtained when
shooting bright objects using the auto settings for the
gain and iris. In cases like this, set the shutter speed to
manual, and adjust.
Zooming and focusing
When the focus is set manually, out‑of‑focusing may occur
during zooming.
After zooming, if necessary, either adjust the focus or set the
focus to auto.
When using the focus at the manual setting, proceed with
zooming after setting the focus position at the Tele end
where the focusing accuracy is higher.
(However, if the distance from the unit to the subject is less
than 1.5 m {4.92 feet}, the subject may shift out of focus at
the Wide end.)
If zooming is performed to the Tele end after having adjusted
the focus at the Wide end, out‑of‑focusing may occur.
Concerning the zoom position when the power is turned
on
When the unit’s power is turned on, the zoom, focus and iris
return to the positions they occupied immediately before the
power was turned off. (This happens for the focus and iris
when they were set manually.)
However, this position may not be restored if, for instance,
the power cable was disconnected during operation.
Operating temperature range
Avoid using the unit in cold locations where the temperature
drops below 0 °C {32 °F} or hot locations where the
temperature rises above +40 °C {104 °F} since these
temperatures downgrade the picture quality and adversely
affect the internal parts.
Concerning the HDMI interface standard
This unit has been certified as HDMI‑compatible, but on rare
occasions images may not be displayed depending on the
HDMI device which has been connected to the unit.
Turn off the power before connecting or disconnecting
the cables.
Always be sure to turn off the power before connecting or
disconnecting the cables.
GP-VD150基本編_英(PGQX1231ZA).indd 14 2012/07/12 14:46:52

15
Operating precautions
Handle the unit carefully.
Do not drop the unit or subject it to strong impact or
vibration. Doing so may cause the unit to malfunction.
When the unit is not in use
Turn off the unit’s power when it is not in use.
When the unit is no longer going to be used, do not leave it
lying around, but be absolutely sure to dispose of it properly.
Do not touch the optical system parts.
The optical system parts are the very heart of the camera.
Under no circumstances must they be touched.
In the unlikely event that they have become dusty, remove
the dust by using a camera blower or by wiping them gently
with a lens cleaning paper.
Do not allow foreign matter to make contact with the
rotating parts.
Otherwise, trouble may be caused.
Keep the unit away from water.
Avoid all direct contact with water. Otherwise, problems may
occur.
Maintenance
Turn off the unit’s power before proceeding with
maintenance.
Otherwise, you may injure yourself.
Wipe the surfaces using a soft dry cloth. Avoid all contact
with benzine, paint thinners and other volatile substances,
and avoid using these substances. Otherwise, the casing
may become discolored.
Do not turn the camera head by hand.
Turning the camera head by hand may cause the unit to
malfunction.
Use the unit in an environment with minimal moisture
and dust.
Avoid using the unit in an environment with high
concentration of moisture or dust since these conditions will
damage the internal parts.
Disposal of the unit
When the unit has reached the end of its service life and is
to be disposed of, ask a qualified contractor to dispose of
the unit properly in order to protect the environment.
GP-VD150基本編_英(PGQX1231ZA).indd 15 2012/07/12 14:46:52

16
Concerning the wireless remote controller (optional accessory)
This unit can be operated by remote control using a
wireless remote controller (model number: AW-RM50G)
which is sold separately.
The unit cannot be operated directly using the wireless
remote controller of an HD visual communication unit.
Check out the following points before using the wireless
remote controller.
Consult your dealer concerning the purchase of a
wireless remote controller.
 Operate the wireless remote controller from positions
less than 6 m {19.7 feet} away from the unit.
 The wireless remote controller may not work when it
is pointed from certain angles at the unit.
From a place where the wireless remote controller signal
light‑sensing area (hereafter, “light‑sensing area”) can
be seen, point the signal transmission window of the
wireless remote controller at the light‑sensing area, and
operate the buttons.
It may prove to be more difficult to operate the unit when
the remote control is operated from behind the unit.
 If the unit is installed near fluorescent lights, plasma
monitors or other such products or if the unit is
exposed to sunlight, the effects of the light may make
it impossible for the unit to be operated using the
wireless remote controller.
Be sure to follow the steps below for installation and use.
• Take steps to ensure that the light‑sensing area will not
be exposed to the light from fluorescent lights, plasma
monitors or other such products or from the sun.
• Install the unit away from fluorescent lights, plasma
monitors and other such products.
 For about 10 minutes even after the batteries have
been removed from the wireless remote controller,
the selection of the operation to be performed (the
[CAM1], [CAM2], [CAM3] or [CAM4] button which
was pressed last) will remain stored in the memory.
When a longer period of time elapses, however, the
selection is reset to the status established when the
[CAM1] button was pressed.
GP-VD150基本編_英(PGQX1231ZA).indd 16 2012/07/12 14:46:52

17
Parts and their functions
 Camera unit
<Rear panel>
<Bottom panel>
1 Wireless remote controller signal light-sensing
area
Light sensors are located in two places at the front of the
camera pedestal.
2 Status display lamp
This lights in the following way depending on the status of
the unit.
Orange: When the standby status is established
Green: When the power is on
Red: When trouble has occurred in the unit
Green and blinks twice:
When a signal matched by the remote control
ID has been received from the wireless
remote controller (optional accessory) while
the power is on
Orange and blinks twice:
When a signal which is not matched by the
remote control ID has been received from
the wireless remote controller (optional
accessory) while the power is on
3 Camera head
This rotates in the horizontal direction.
4 Lens unit
This rotates in the up and down direction.
5 IR ID switches [IRID]
[CAM1] [CAM2] [CAM3] [CAM4]
These are used to select the ID of the wireless remote
controller (optional accessory).
The IR ID switch settings “CAM1” to “CAM4” correspond
to the [CAM1] to [CAM4] buttons on the wireless remote
controller.
6 HDMI connector [HDMI]
This is the HDMI video output connector.
7 Anti-theft wire mounting hole
Use this hole to attach the wire bracket.
8 Service connector
This connector is used only when maintenance is carried
out.
9 DC IN connector [12V IN ]
Connect the AC adapter supplied with the unit to this
connector to supply the DC 12 V voltage to the unit.
GP-VD150基本編_英(PGQX1231ZA).indd 17 2012/07/12 14:46:53

18
Parts and their functions
: Threaded hole (thread: 1/4-20UNC) for mounting
the camera
Use this hole when mounting the camera on a tripod, etc.
 Service switches
ON
OFF
SW1 SW2 SW3 SW4
The camera is used with all the switches at the OFF
setting.
GP-VD150基本編_英(PGQX1231ZA).indd 18 2012/07/12 14:46:53

19
Parts and their functions
 Wireless remote controller
(optional accessory)
1 ON/STANDBY button
Each time this is pressed for at least 2 seconds,
operation switches between turning on the unit’s power
and establishing the standby status.
 When operation is transferred to the STANDBY
mode: The current pan‑tilt position is stored in the
memory (as a POWER ON preset), and the camera
moves so that it points toward the back.
 When operation is transferred to the POWER ON
mode: The camera moves to the position which was
stored in the memory (as a POWER ON preset)
when operation was transferred to the STANDBY
mode.
Notes
2 Signal transmission window
3 MENU button
Each time this is pressed for at least 2 seconds,
operation switches between displaying the unit’s menu
and exiting the menu.
When it is pressed quickly (for less than 2 seconds) while
a menu is displayed, the setting change is canceled.
4 CAM1 to CAM4 buttons
These are used to select the units that are to be
operated.
Once a button has been selected, the unit corresponding
to the selected button can be operated.
5 SET button
If this button is pressed when one of the “Manual1 to 3”
settings has been selected for “Scene” on the camera
menu and the AWB A memory or AWB B memory has
been selected by the white balance adjustment, the white
balance is automatically adjusted and registered in the
selected memory.
6 MODE button
This is used for future expansion of the functions.
It is not used at the present time.
7 GAIN buttons [OFF] [LOW] [HI] [AUTO]
These are used to set the gain.
The gain increase can be set in three steps using the
[OFF], [LOW] and [HI] buttons.
[LOW] is set to 9 dB, and [HI] is set to 18 dB.
When the [AUTO] button is pressed, the AGC function
is activated, and the gain is adjusted automatically
depending on the light quantity.
The maximum gain of the AGC function can be set using
the menu.
8 Preset memory call buttons [1] to [12]
These are used to call the information on the unit’s
directions and other settings, which have been registered
in the unit’s preset memories No.1 to No.12, and
reproduce those settings.
GP-VD150基本編_英(PGQX1231ZA).indd 19 2012/07/12 14:46:53

20
Parts and their functions
9 PRESET/LIMIT button
This is used to register the settings in the preset
memories.
When a preset memory call button is pressed while the
PRESET/LIMIT button is held down, the information on
the unit’s current direction and other settings is registered
in the call button.
Preset memory call buttons [1] to [12] correspond to the
unit’s No.1 to No.12 preset memories.
: Pan-tilt buttons and menu operation buttons
[] [] [] [] []
(1) These are used to change the unit’s direction.
The unit is tilted in the up/down direction using the
[] and [] buttons and panned in the left/right
direction using the [] and [] buttons.
The [] button does not work during tilting and
panning.
When the [] or [] and [] or [] buttons are
pressed at the same time, the unit moves diagonally.
(2) The buttons are used for menu operations when the
unit displays the menus.
Use the [], [], [] and [] buttons to select the
menu items.
When a selected item has a sub‑menu, the sub‑menu
will be displayed by pressing the [] button.
When the cursor is aligned with a particular item and
the [] button is pressed on the setting menu at the
bottom hierarchical level, the setting of the selected
item blinks.
When the [] button is pressed after the setting
has been changed using the [], [], [] and []
buttons, the setting stops blinking, and the new
setting is entered.
With a regular menu, the new setting is reflected
immediately after it has been changed if the change
was made from the setting in the blinking status, but
there are some menus (Scene, Format and Initialize)
where it is reflected only after the [] button has
been pressed, the blinking has stopped and the new
setting has been entered.
If the MENU button is pressed quickly (for less than
2 seconds) while the setting is in the blinking status,
the change will be canceled, and the setting selected
prior to the change will be restored.
 FOCUS buttons [F] [N]
These are used to adjust the lens focus manually when
the manual setting is established for the lens focus.
The focus is adjusted in the far using the [F] button and in
the near using the [N] button.
 A/FOCUS button
This is used when automatically adjusting the lens focus.
 M/FOCUS button
This is used when manually adjusting the lens focus.
The FOCUS buttons ([F] and [N]) are used when
performing the actual adjustment.
 OPT buttons [ON] [OFF]
These are used for future expansion of the functions.
They are not used at the present time.
 HOME button
When this is pressed for at least 2 seconds, the unit’s
direction (panning or tilting) returns to the reference
position.
 ZOOM buttons [T] [W]
These are used to adjust the lens zoom.
The zoom is adjusted in the wide‑angle using the [W]
button and in the telephoto using the [T] button.
 FAST button
This is used to change the movement speed at which
the panning, tilting, zooming and focusing operations are
performed to the high speed.
 The operating speed for panning and tilting when
the preset memory settings have been called can
be changed using the Preset Speed item of the
camera menu.
Note
 SLOW button
This is used to change the movement speed at which
the panning, tilting, zooming and focusing operations are
performed to the low speed.
 A/IRIS button
This establishes the setting for adjusting the lens iris
automatically in line with the light quantity.
 M/IRIS button
This establishes the setting for adjusting the lens iris
manually.
The IRIS + and IRIS – buttons are used when performing
the actual adjustment.
 IRIS + button
This is used to adjust the lens iris in the opening
direction.
 IRIS – button
This is used to adjust the lens iris in the closing direction.
GP-VD150基本編_英(PGQX1231ZA).indd 20 2012/07/12 14:46:53