Panasonic H-HS043PP User manual

file:///C|/U...al/Temp/Rar$EXa0.393/viewing/SGML_VIEW_DATA/ALL/H-HS043PP/SVC/DSC1504015CE/doc/DSC1504015CE_cvr.xml[11/12/2018 3:07:32 PM]
Order No.DSC1504015CE
B26
Interchangeable Lens for Digital Camera
Model No. H-HS043PP
H-HS043E
H-HS043GK
Colour
(S)..............Silver Type
(K)..............Black Type

file:///C|/U...al/Temp/Rar$EXa0.393/viewing/SGML_VIEW_DATA/ALL/H-HS043PP/SVC/DSC1504015CE/doc/DSC1504015CE_cvr.xml[11/12/2018 3:07:32 PM]
© Panasonic Corporation 2015 Unauthorized copying and distribution is a violation of law.

file:///C|/U...al/Temp/Rar$EXa0.393/viewing/SGML_VIEW_DATA/ALL/H-HS043PP/SVC/DSC1504015CE/doc/DSC1504015CE_01.xml[11/12/2018 3:19:23 PM]
1 Service Navigation
1.1 Introduction
This service manual contains technical information, which allow service personnel’s to understand and service this model.
Please place orders using the parts list and not the drawing reference numbers.

1.2 Important Notice
1.2.1 About LENS MAIN UNIT (Ref. 203)
1. 
lens adjustments.

2. 
209), to maintain Serial number of owner's original lens.

file:///C|/U...al/Temp/Rar$EXa0.393/viewing/SGML_VIEW_DATA/ALL/H-HS043PP/SVC/DSC1504015CE/doc/DSC1504015CE_01.xml[11/12/2018 3:19:23 PM]
3. No adjustment is required when replacing the part mentioned on Fig.1-1. But, when tighten the concerned screws,apply proper torque
mentioned on "4. Disassembly and Assembly Instruction" section.

file:///C|/U...shetabi/AppData/Local/Temp/Rar$EXa0.393/viewing/SGML_VIEW_DATA/ALL/H-HS043PP/SVC/DSC1504015CE/doc/DSC1504015CE_02.xml[11/12/2018 3:38:46 PM]
2 Operating Guide
2.1 Before Use
2.2 Cautions For Use

file:///C|/U...shetabi/AppData/Local/Temp/Rar$EXa0.393/viewing/SGML_VIEW_DATA/ALL/H-HS043PP/SVC/DSC1504015CE/doc/DSC1504015CE_02.xml[11/12/2018 3:38:46 PM]
2.3 Components

file:///C|/U...shetabi/AppData/Local/Temp/Rar$EXa0.393/viewing/SGML_VIEW_DATA/ALL/H-HS043PP/SVC/DSC1504015CE/doc/DSC1504015CE_02.xml[11/12/2018 3:38:46 PM]
2.3.1 Accessories
2.3.2 Attaching/Detaching the Lens

file:///C|/U...shetabi/AppData/Local/Temp/Rar$EXa0.393/viewing/SGML_VIEW_DATA/ALL/H-HS043PP/SVC/DSC1504015CE/doc/DSC1504015CE_02.xml[11/12/2018 3:38:46 PM]

file:///C|/U...shetabi/AppData/Local/Temp/Rar$EXa0.393/viewing/SGML_VIEW_DATA/ALL/H-HS043PP/SVC/DSC1504015CE/doc/DSC1504015CE_02.xml[11/12/2018 3:38:46 PM]

file:///C|/U...al/Temp/Rar$EXa0.393/viewing/SGML_VIEW_DATA/ALL/H-HS043PP/SVC/DSC1504015CE/doc/DSC1504015CE_03.xml[11/12/2018 3:39:07 PM]
3 Service Fixture and Tools
3.1 Service Fixture and Tools
The following Service Fixture and Tools are used for Checking & Servicing for this unit.
3.2 Clean Box

10,000 (Federal Standard 209D).
[NOTE]

when cleaning the inside of a lens.

file:///C|/U...al/Temp/Rar$EXa0.393/viewing/SGML_VIEW_DATA/ALL/H-HS043PP/SVC/DSC1504015CE/doc/DSC1504015CE_04.xml[11/12/2018 3:39:43 PM]
4 Disassembly and Assembly Procedure
4.1 Outline
It is recommended dealing with clean box, to keep maintaining the dustproof environment.
(Refer to“3.2. Clean Box”section of this service manual for details.)
Important:
1. 

As for procedure, refer to the “5 Maintenance” for details.
2. To minimize the possibilities/risk of getting the dust/dirt on the lens surface, keep covering the lens unit with lens caps (front & rear), other
than necessary cases.
3. 
4. Blow off the dust on the surface of the lens with a blower brush.
5. Use lens cleaning KIT (BK)(VFK1900BK).
Proceed disassemble/assemble, by referring the following table and Fig. W1.
NOTE:
1. 
following table.
2. Use small driver (VFK1390) when removing/tightening B206.
Interchangeable Lens (H-HS043)

file:///C|/U...al/Temp/Rar$EXa0.393/viewing/SGML_VIEW_DATA/ALL/H-HS043PP/SVC/DSC1504015CE/doc/DSC1504015CE_04.xml[11/12/2018 3:39:43 PM]
4.2 Disassembly procedure
Important:


4.2.1 Removal of the Shading frame
1. Remove the 2 screws (A).

file:///C|/U...al/Temp/Rar$EXa0.393/viewing/SGML_VIEW_DATA/ALL/H-HS043PP/SVC/DSC1504015CE/doc/DSC1504015CE_04.xml[11/12/2018 3:39:43 PM]
4.2.2 Removal of the L mount unit
1. Remove 1 screw (B) and 3 screws (C).

file:///C|/U...al/Temp/Rar$EXa0.393/viewing/SGML_VIEW_DATA/ALL/H-HS043PP/SVC/DSC1504015CE/doc/DSC1504015CE_04.xml[11/12/2018 3:39:43 PM]
4.2.3 Removal of the Lens P.C.B. unit and the Mount contact unit
1. Disconnect 2 connectors.

file:///C|/U...al/Temp/Rar$EXa0.393/viewing/SGML_VIEW_DATA/ALL/H-HS043PP/SVC/DSC1504015CE/doc/DSC1504015CE_04.xml[11/12/2018 3:39:43 PM]
4.2.4 Removal of the Mount contact unit
1. Disconnect 1 connector.
4.2.5 Removal of the 4,5th unit
1. Remove 3 screws (D).

file:///C|/U...al/Temp/Rar$EXa0.393/viewing/SGML_VIEW_DATA/ALL/H-HS043PP/SVC/DSC1504015CE/doc/DSC1504015CE_04.xml[11/12/2018 3:39:43 PM]
4.2.6 Removal of the Rear frame unit
1. After removing 2 screws (E), remove the Focus ring earth spring.
And, remove the Focus enc holder from bosses.
(Be careful not to break it.)
Then, remove the Rear frame unit after removing screw (F).
4.3 Assembly procedure
Important:

file:///C|/U...al/Temp/Rar$EXa0.393/viewing/SGML_VIEW_DATA/ALL/H-HS043PP/SVC/DSC1504015CE/doc/DSC1504015CE_04.xml[11/12/2018 3:39:43 PM]

4.3.1 Installation of the Rear frame unit
1. 
Then, install the Focus enc holder to bosses.


(Torque Driver : RFKZ0456)
(Torque : 8 ± 1 N cm)
*How to install the Focus enc holder.
(1)Put boss into a positionning hole (long) of the Focus enc holder.
(2)Deform the Focus enc holder in the direction of the arrow.
(3)Put boss into the other positionning hole (circle) of the Focus enc
holder.
Note:

file:///C|/U...al/Temp/Rar$EXa0.393/viewing/SGML_VIEW_DATA/ALL/H-HS043PP/SVC/DSC1504015CE/doc/DSC1504015CE_04.xml[11/12/2018 3:39:43 PM]
When installing the Focus enc holder, note the position of the photo sensors.
4.3.2 Installation of the 4,5th unit
1. 
(Torque Driver : RFKZ0456)
(Torque : 10 ± 1 N cm)
4.3.3 Installation of the Mount contact unit
1. Connect FPC to 1 connector.

file:///C|/U...al/Temp/Rar$EXa0.393/viewing/SGML_VIEW_DATA/ALL/H-HS043PP/SVC/DSC1504015CE/doc/DSC1504015CE_04.xml[11/12/2018 3:39:43 PM]
4.3.4 Installtion of the Lens P.C.B.unit and the Mount contact unit
1. Connect FPCs to 2 connectors
4.3.5 Installation of the L mount unit
1. 
(Torque Driver : RFKZ0456)
(Torque : 20 ± 1 N cm)
And, tighten 1 screw (B) by using the small driver.

file:///C|/U...al/Temp/Rar$EXa0.393/viewing/SGML_VIEW_DATA/ALL/H-HS043PP/SVC/DSC1504015CE/doc/DSC1504015CE_04.xml[11/12/2018 3:39:43 PM]
4.3.6 Installation of the Shading frame
1. 
(Torque Driver : RFKZ0456)
(Torque : 10 ± 1 N cm)