Panasonic LUMIX DMC-FH27DP User manual

© Panasonic Corporation 2011 Unauthorized copy-
ing and distribution is a violation of law.
ORDER NO.DSC1108052AE
B26
Digital Camera
Model No. DMC-FH27DP
Vol.1
Colour
(S)-------Silver Type
(K)-------Black Type
(R)-------Red Type
TABLE OF CONTENTS PAGE PAGE
1Introduction-------------------------------------------------------- 2
2 Service Navigation----------------------------------------------- 3
2.1. How to Define the Model Suffix (NTSC or PAL
model)-------------------------------------------------------- 3
3 Replacement Parts List ---------------------------------------- 6
3.1. Frame & Casing Section--------------------------------- 6
3.2. Packing Parts and Accessories Section ------------ 6
Please use this manual together with the other documents for
Model No.DMC-FH27P/PC/PR/PU/GA/GC/GF/GK/GN Vol.1 Order No. DSC1102006CE
Model No.DMC-FS37EB/EE/EG/EP Vol.1 Order No. DSC1102006CE

2
1 Introduction
This Service Manual contains technical information which will help service personnel to understand and service the Digital Camera
DMC-FH27DP.
The Digital Camera DMC-FH27DP have been developed based on DMC-FH27P.
Since this Service Manual does not cover the same part which is already described in the Service Manual for DMC-FH27P.
When servicing, refer to the descriptions in the Service documents for
DMC-FH27P/PC/PR/PU/GA/GC/GF/GK/GN/FS37EB/EE/EG/EP Vol.1 Order No. DSC1102006CE
NOTE:
Compared with DMC-FH27P, only the different part is that the packing part & accessories section of the replacement parts list
section.

3
2 Service Navigation
2.1. How to Define the Model Suffix (NTSC or PAL model)
There are six kinds of DMC-FS37and FH27, regardless of the colours.
• a) DMC-FH27P/PC
• b) DMC-FS37EB/EG/EP
• c) DMC-FS37EE
• d) DMC-FH27GK
• e) DMC-FH27GN
• f ) DMC-FH27PR/PU/GA/GC/GF
• g) DMC-FH27DP
What is the difference is that the “INITIAL SETTINGS” data which is stored in Flash-ROM mounted on MAIN P.C.B..
2.1.1. Defining methods:
To define the model suffix to be serviced, refer to the nameplate which is putted on the bottom side of the Unit.
NOTE:
After replacing the MAIN P.C.B., be sure to achieve adjustment.
The service software is available at “TSN Website”. To download, click on “Support Information from NWBG/VDBG-AVC”.

4
2.1.2. INITIAL SETTINGS:
After replacing the MAIN P.C.B., be sure to perform the initial settings after achieving the adjustment by ordering the following pro-
cedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
Before proceeding Initial settings, be sure to read the following CAUTIONS.
2. PROCEDURES:
• Precautions: Read the above "CAUTION 1" and "CAUTION 2", carefully.
• Preparation:
- Attach the Battery or AC Adaptor with a DC coupler to the unit.
(Since this unit has built-in memory, it can be performed without inserting SD memory card.)
1. Turn the Power on.
2. Select with the touch panel in order to [ REC ] mode and [ NORMAL PICTURE ] mode.
3. Turn the Power off.
(If the unit is other than [ NORMAL PICTURE ] mode, it does not display the initial settings menu.)
•Step 1. The temporary cancellation of “INITIAL SETTINGS”:
While pressing “W side of [ ZOOM LEVER ]”, [ SHUTTER BUTTON ] and touch the screen (Any position of the screen is accept-
able) simultaneously, turn the power on.
•Step 2. The cancellation of “INITIAL SETTINGS”:
1. Select with the touch panel to [ PLAYBACK ] mode.
2. Version display in the playback menu, touch near the center of screen, while [ SHUTTER BUTTON ] is pressed halfway.
3. Turn the power off.
The LCD displays the “ ! ” mark before the unit powers down.
•Step 3. Turn the Power on:
Turn the Power on.
•Step 4. Display the INITIAL SETTING:
Display “Clock Set” screen, and then move the [ ZOOM LEVER ] to “T” side, turn the power off.
The "INITIAL SETTINGS" menu is displayed.
There are two kinds of “INITIAL SETTINGS” menu form as follows:

5
•Step 5. Choose the model suffix in “INITIAL SETTINGS”:
Touch the suffix [P] with touch panel.
•Step 6. Set the model suffix in “INITIAL SETTINGS”:
The only set area is displayed, and then press the “[ End ] of Cursor buttons” after confirmation.
(The unit is powered off automatically.)
•Step 7. CONFIRMATION:
Confirm the display of “PLEASE SET THE CLOCK” in concernd language when the unit is turned on again.
When the unit is connected to PC with USB cable, it is detected as removable media.
1) As for your reference, major default setting condition is as shown in the following table.
•Default setting (After “INITIAL SETTINGS”)
MODEL VIDEO OUTPUT LANGUAGE DATE REMARKS
a) DMC-FH27DP NTSC English Month/Date/Year

6
3 Replacement Parts List
3.1. Frame & Casing Section
COMPARISON CHART:
The following table shows difference between DMC-FH27P and DMC-FH27DP.
3.2. Packing Parts and Accessories Section
Ref.No. Original Part No. New Part No. Part Name Pcs Remarks
DMC-FH27P DMC-FH27DP
1 VEP56126D
or
VEP56126F
VEP56126F MAIN P.C.B. 1
9 VMP9874 VMP0A34 FRAME PLATE 1
32 VYK4P64 VYK5D56 LCD UNIT 1
Ref.No. Part No. Part Name & Description Pcs Remarks
200 VPF1372-A CAMERA BAG 1
201 DE-A91BA/SX BATTERY CHARGER 1
202 ----- BATTERY 1
204 K1HY08YY0019 USB CABLE W/PLUG 1
205 K1HY08YY0020 AV CABLE W/PLUG 1
206 VFC4297-B HAND STRAP 1
207 VGQ0C14 TOUCH PEN 1
208 VPF1378 BAG, POLYETHYLENE 1
211 VFF0731-S CD-ROM (SOFT/INSTRUCTION BOOK) 1 [SPC] See"Notes"
212 VQC8055 O/I SOFTWARE(ENGLISH/CANADIAN FRENCH) 1
213 VQT3D74-2 BASIC O/I (ENGLISH/SPANISH) 1
214 VPK4654 PACKING CASE 1 (-S)
214 VPK4660 PACKING CASE 1 (-K)
214 VPK4666 PACKING CASE 1 (-R)
215 VPN7239 CUSHION 1
217 VQL2N46 UPC LABEL 1 (-S)
217 VQL2N47 UPC LABEL 1 (-K)
217 VQL2N48 UPC LABEL 1 (-R)

7
Packing Parts and Accessories Section